Moved the old firmware for STM32L011 to fw_old and migrated the firmware to STM32L031 in fw. I2C and TIM21 seem functional. USART2 is receiving correctly, but the modbus test is not receiving messages.
This commit is contained in:
David Žaitlík
@@ -5,6 +5,8 @@
|
||||
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.enable_swv" value="false"/>
|
||||
<intAttribute key="com.st.stm32cube.ide.mcu.debug.launch.formatVersion" value="2"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.ip_address_local" value="localhost"/>
|
||||
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.limit_swo_clock.enabled" value="false"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.limit_swo_clock.value" value=""/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.loadList" value="{"fItems":[{"fIsFromMainTab":true,"fPath":"Debug/iaq_wired_sensor.elf","fProjectName":"iaq_wired_sensor","fPerformBuild":true,"fDownload":true,"fLoadSymbols":true}]}"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.override_start_address_mode" value="default"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.remoteCommand" value="target remote"/>
|
||||
@@ -14,7 +16,6 @@
|
||||
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.startuptab.haltonexception" value="true"/>
|
||||
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swd_mode" value="true"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swv_port" value="61235"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swv_trace_div" value="8"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.swv_trace_hclk" value="16000000"/>
|
||||
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.launch.useRemoteTarget" value="true"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.launch.vector_table" value=""/>
|
||||
@@ -27,22 +28,28 @@
|
||||
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.enable_shared_stlink" value="false"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.external_loader" value=""/>
|
||||
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.external_loader_init" value="false"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.frequency" value="0"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.frequency" value="24000"/>
|
||||
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.halt_all_on_reset" value="false"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.log_file" value="/home/user/STM32CubeIDE/workspace_1.5.0/iaq_wired_sensor/Debug/st-link_gdbserver_log.txt"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.log_file" value="/home/mrs/Personal/HDIoT/Smart_Household/iaq_wired_sensor/fw/Debug/st-link_gdbserver_log.txt"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.low_power_debug" value="enable"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.max_halt_delay" value="2"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.reset_strategy" value="connect_under_reset"/>
|
||||
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.stlink_check_serial_number" value="false"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.stlink_txt_serial_number" value=""/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.watchdog_config" value="none"/>
|
||||
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlinkenable_rtos" value="false"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlinkrestart_configurations" value="{"fItems":[{"fDisplayName":"Reset","fIsSuppressible":false,"fResetAttribute":"Software system reset","fResetStrategies":[{"fDisplayName":"Software system reset","fLaunchAttribute":"system_reset","fGdbCommands":["monitor reset\n"],"fCmdOptions":["-g"]},{"fDisplayName":"Hardware reset","fLaunchAttribute":"hardware_reset","fGdbCommands":["monitor reset hardware\n"],"fCmdOptions":["-g"]},{"fDisplayName":"Core reset","fLaunchAttribute":"core_reset","fGdbCommands":["monitor reset core\n"],"fCmdOptions":["-g"]},{"fDisplayName":"None","fLaunchAttribute":"no_reset","fGdbCommands":[],"fCmdOptions":["-g"]}],"fGdbCommandGroup":{"name":"Additional commands","commands":[]}}]}"/>
|
||||
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.swv.swv_wait_for_sync" value="true"/>
|
||||
<booleanAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.enableRtosProxy" value="false"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyCustomProperties" value=""/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyDriver" value="threadx"/>
|
||||
<booleanAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyDriverAuto" value="false"/>
|
||||
<stringAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyDriverPort" value="cortex_m0"/>
|
||||
<intAttribute key="com.st.stm32cube.ide.mcu.rtosproxy.rtosProxyPort" value="60000"/>
|
||||
<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="false"/>
|
||||
<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="false"/>
|
||||
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value=""/>
|
||||
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
|
||||
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="ST-LINK (ST-LINK GDB server)"/>
|
||||
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDeviceId" value="com.st.stm32cube.ide.mcu.debug.stlink"/>
|
||||
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
|
||||
<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="61234"/>
|
||||
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
|
||||
@@ -61,13 +68,13 @@
|
||||
<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="Debug/iaq_wired_sensor.elf"/>
|
||||
<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="iaq_wired_sensor"/>
|
||||
<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
|
||||
<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.1512690796"/>
|
||||
<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.config.exe.debug.583977815"/>
|
||||
<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
|
||||
<listEntry value="/iaq_wired_sensor"/>
|
||||
</listAttribute>
|
||||
<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
|
||||
<listEntry value="4"/>
|
||||
</listAttribute>
|
||||
<stringAttribute key="org.eclipse.dsf.launch.MEMORY_BLOCKS" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?><memoryBlockExpressionList context="reserved-for-future-use"><gdbmemoryBlockExpression address="134742016" label="0x08080000"/><gdbmemoryBlockExpression address="134742020" label="0x08080004"/><gdbmemoryBlockExpression address="134742016" label="0x08080000"/></memoryBlockExpressionList>"/>
|
||||
<stringAttribute key="org.eclipse.dsf.launch.MEMORY_BLOCKS" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?><memoryBlockExpressionList context="reserved-for-future-use"/>"/>
|
||||
<stringAttribute key="process_factory_id" value="org.eclipse.cdt.dsf.gdb.GdbProcessFactory"/>
|
||||
</launchConfiguration>
|
||||
|
||||
Reference in New Issue
Block a user