Added more registers and achecks.
This commit is contained in:
David Žaitlík
parent
06ec3f82eb
commit
e0e7c8489e
fw
.cproject
.settings
Core
Debug
Core
Src
config.dconfig.oi2c.omain.dmain.omain.sustm32l0xx_it.dstm32l0xx_it.osubdir.mksyscalls.osysmem.osystem_stm32l0xx.o
Startup
Drivers/STM32L0xx_HAL_Driver/Src
stm32l0xx_ll_dma.ostm32l0xx_ll_exti.ostm32l0xx_ll_gpio.ostm32l0xx_ll_i2c.ostm32l0xx_ll_pwr.ostm32l0xx_ll_rcc.ostm32l0xx_ll_tim.ostm32l0xx_ll_usart.ostm32l0xx_ll_utils.osubdir.mk
Libs
makefilerht_wired_sensor.binrht_wired_sensor.elfrht_wired_sensor.listrht_wired_sensor.mapLibs
@ -25,11 +25,11 @@
|
||||
<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.2062446076" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
|
||||
<builder buildPath="${workspace_loc:/iaq_wired_sensor}/Debug" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder.1773727162" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.builder"/>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.606108895" name="MCU GCC Assembler" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.471998169" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.value.g3" valueType="enumerated"/>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols.757865890" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols" valueType="definedSymbols">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.471998169" name="Debug level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.debuglevel.value.g3" valueType="enumerated"/>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols.757865890" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
|
||||
<listOptionValue builtIn="false" value="DEBUG"/>
|
||||
</option>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.includepaths.1487193934" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.includepaths.1487193934" name="Include paths (-I)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.assembler.option.includepaths" useByScannerDiscovery="false" valueType="includePath">
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/Libs/crc8}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/Libs/ltr329}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/Libs/modbus}""/>
|
||||
@ -73,7 +73,8 @@
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level.1962175978" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.cpp.compiler.option.optimization.level" useByScannerDiscovery="false"/>
|
||||
</tool>
|
||||
<tool id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.2099198825" name="MCU GCC Linker" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker">
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script.484597079" name="Linker Script (-T)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script" value="${workspace_loc:/${ProjName}/STM32L031G6UX_FLASH.ld}" valueType="string"/>
|
||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script.484597079" name="Linker Script (-T)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.script" useByScannerDiscovery="false" value="${workspace_loc:/${ProjName}/STM32L031G6UX_FLASH.ld}" valueType="string"/>
|
||||
<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="true" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.directories.1998598334" name="Library search path (-L)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.option.directories" valueType="libPaths"/>
|
||||
<inputType id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input.851999185" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.linker.input">
|
||||
<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
|
||||
<additionalInput kind="additionalinput" paths="$(LIBS)"/>
|
||||
|
||||
74
fw/.settings/org.eclipse.cdt.codan.core.prefs
Normal file
74
fw/.settings/org.eclipse.cdt.codan.core.prefs
Normal file
@ -0,0 +1,74 @@
|
||||
com.st.stm32cube.ide.mcu.ide.oss.source.checker.libnano.problem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Float formatting support\\")"}
|
||||
eclipse.preferences.version=1
|
||||
org.eclipse.cdt.codan.checkers.errnoreturn.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"No return\\")",implicit\=>false}
|
||||
org.eclipse.cdt.codan.checkers.errreturnvalue.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Unused return value\\")"}
|
||||
org.eclipse.cdt.codan.checkers.localvarreturn=-Warning
|
||||
org.eclipse.cdt.codan.checkers.localvarreturn.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Returning the address of a local variable\\")"}
|
||||
org.eclipse.cdt.codan.checkers.nocommentinside.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Nesting comments\\")"}
|
||||
org.eclipse.cdt.codan.checkers.nolinecomment.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Line comments\\")"}
|
||||
org.eclipse.cdt.codan.checkers.noreturn.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"No return value\\")",implicit\=>false}
|
||||
org.eclipse.cdt.codan.internal.checkers.AbstractClassCreation.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Abstract class cannot be instantiated\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.AmbiguousProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Ambiguous problem\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.AssignmentInConditionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Assignment in condition\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.AssignmentToItselfProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Assignment to itself\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.BlacklistProblem=-Warning
|
||||
org.eclipse.cdt.codan.internal.checkers.BlacklistProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Function or method is blacklisted\\")",blacklist\=>()}
|
||||
org.eclipse.cdt.codan.internal.checkers.CStyleCastProblem=-Warning
|
||||
org.eclipse.cdt.codan.internal.checkers.CStyleCastProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"C-Style cast instead of C++ cast\\")",checkMacro\=>true}
|
||||
org.eclipse.cdt.codan.internal.checkers.CaseBreakProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"No break at end of case\\")",no_break_comment\=>"no break",last_case_param\=>false,empty_case_param\=>false,enable_fallthrough_quickfix_param\=>false}
|
||||
org.eclipse.cdt.codan.internal.checkers.CatchByReference.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Catching by reference is recommended\\")",unknown\=>false,exceptions\=>()}
|
||||
org.eclipse.cdt.codan.internal.checkers.CircularReferenceProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Circular inheritance\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.ClassMembersInitialization.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Class members should be properly initialized\\")",skip\=>true}
|
||||
org.eclipse.cdt.codan.internal.checkers.CopyrightProblem=-Warning
|
||||
org.eclipse.cdt.codan.internal.checkers.CopyrightProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Lack of copyright information\\")",regex\=>".*Copyright.*"}
|
||||
org.eclipse.cdt.codan.internal.checkers.DecltypeAutoProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Invalid 'decltype(auto)' specifier\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.FieldResolutionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Field cannot be resolved\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.FloatCompareProblem=-Warning
|
||||
org.eclipse.cdt.codan.internal.checkers.FloatCompareProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Direct float comparison\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.FunctionResolutionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Function cannot be resolved\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.GotoStatementProblem=-Warning
|
||||
org.eclipse.cdt.codan.internal.checkers.GotoStatementProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Goto statement used\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.InvalidArguments.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Invalid arguments\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.InvalidTemplateArgumentsProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Invalid template argument\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.LabelStatementNotFoundProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Label statement not found\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.MagicNumberProblem=-Warning
|
||||
org.eclipse.cdt.codan.internal.checkers.MagicNumberProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Avoid magic numbers\\")",checkArray\=>true,checkOperatorParen\=>true,exceptions\=>(1,0,-1,2,1.0,0.0,-1.0)}
|
||||
org.eclipse.cdt.codan.internal.checkers.MemberDeclarationNotFoundProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Member declaration not found\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.MethodResolutionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Method cannot be resolved\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.MissCaseProblem=-Warning
|
||||
org.eclipse.cdt.codan.internal.checkers.MissCaseProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Missing cases in switch\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.MissDefaultProblem=-Warning
|
||||
org.eclipse.cdt.codan.internal.checkers.MissDefaultProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Missing default in switch\\")",defaultWithAllEnums\=>false}
|
||||
org.eclipse.cdt.codan.internal.checkers.MissReferenceProblem=-Warning
|
||||
org.eclipse.cdt.codan.internal.checkers.MissReferenceProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Missing reference return value in assignment operator\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.MissSelfCheckProblem=-Warning
|
||||
org.eclipse.cdt.codan.internal.checkers.MissSelfCheckProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Missing self check in assignment operator\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.MultipleDeclarationsProblem=-Warning
|
||||
org.eclipse.cdt.codan.internal.checkers.MultipleDeclarationsProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Multiple variable declaration\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.NamingConventionFunctionChecker.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Name convention for function\\")",pattern\=>"^[a-z]",macro\=>true,exceptions\=>()}
|
||||
org.eclipse.cdt.codan.internal.checkers.NoDiscardProblem=Warning
|
||||
org.eclipse.cdt.codan.internal.checkers.NoDiscardProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Return value not evaluated\\")",macro\=>true}
|
||||
org.eclipse.cdt.codan.internal.checkers.NonVirtualDestructorProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Class has a virtual method and non-virtual destructor\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.OverloadProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Invalid overload\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.RedeclarationProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Invalid redeclaration\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.RedefinitionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Invalid redefinition\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.ReturnStyleProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Return with parenthesis\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.ScanfFormatStringSecurityProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Format String Vulnerability\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.ShallowCopyProblem=-Warning
|
||||
org.eclipse.cdt.codan.internal.checkers.ShallowCopyProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Miss copy constructor or assignment operator\\")",onlynew\=>false}
|
||||
org.eclipse.cdt.codan.internal.checkers.StatementHasNoEffectProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Statement has no effect\\")",macro\=>true,exceptions\=>()}
|
||||
org.eclipse.cdt.codan.internal.checkers.StaticVariableInHeaderProblem=-Warning
|
||||
org.eclipse.cdt.codan.internal.checkers.StaticVariableInHeaderProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Static variable in header file\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.SuggestedParenthesisProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Suggested parenthesis around expression\\")",paramNot\=>false}
|
||||
org.eclipse.cdt.codan.internal.checkers.SuspiciousSemicolonProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Suspicious semicolon\\")",else\=>false,afterelse\=>false}
|
||||
org.eclipse.cdt.codan.internal.checkers.SymbolShadowingProblem=-Warning
|
||||
org.eclipse.cdt.codan.internal.checkers.SymbolShadowingProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Symbol shadowing\\")",paramFuncParameters\=>true}
|
||||
org.eclipse.cdt.codan.internal.checkers.TypeResolutionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Type cannot be resolved\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.UnusedFunctionDeclarationProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Unused function declaration\\")",macro\=>true}
|
||||
org.eclipse.cdt.codan.internal.checkers.UnusedStaticFunctionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Unused static function\\")",macro\=>true}
|
||||
org.eclipse.cdt.codan.internal.checkers.UnusedVariableDeclarationProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Unused variable declaration in file scope\\")",macro\=>true,exceptions\=>("@(\#)","$Id")}
|
||||
org.eclipse.cdt.codan.internal.checkers.UsingInHeaderProblem=-Warning
|
||||
org.eclipse.cdt.codan.internal.checkers.UsingInHeaderProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Using directive in header\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.VariableResolutionProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Symbol is not resolved\\")"}
|
||||
org.eclipse.cdt.codan.internal.checkers.VirtualMethodCallProblem=-Error
|
||||
org.eclipse.cdt.codan.internal.checkers.VirtualMethodCallProblem.params={launchModes\=>{RUN_ON_FULL_BUILD\=>true,RUN_ON_INC_BUILD\=>true,RUN_ON_FILE_OPEN\=>false,RUN_ON_FILE_SAVE\=>false,RUN_AS_YOU_TYPE\=>true,RUN_ON_DEMAND\=>true},suppression_comment\=>"@suppress(\\"Virtual method call in constructor/destructor\\")"}
|
||||
6
fw/.settings/org.eclipse.cdt.core.prefs
Normal file
6
fw/.settings/org.eclipse.cdt.core.prefs
Normal file
@ -0,0 +1,6 @@
|
||||
doxygen/doxygen_new_line_after_brief=true
|
||||
doxygen/doxygen_use_brief_tag=false
|
||||
doxygen/doxygen_use_javadoc_tags=true
|
||||
doxygen/doxygen_use_pre_tag=false
|
||||
doxygen/doxygen_use_structural_commands=false
|
||||
eclipse.preferences.version=1
|
||||
@ -49,23 +49,17 @@ config_read(&config);
|
||||
* Device description data can be accessed using direct readout from the memory
|
||||
* Device configuration data can be accessed using config_t struct.
|
||||
*/
|
||||
#define CONFIG_DEFAULT_LED_ON 1
|
||||
#define CONFIG_DEFAULT_LED_BRIGHTNESS 100
|
||||
#define CONFIG_DEFAULT_LED_ALERT1_LIMIT 1500
|
||||
#define CONFIG_DEFAULT_LED_ALERT2_LIMIT 3000
|
||||
#define CONFIG_DEFAULT_LED_SMOOTH 1
|
||||
#define CONFIG_DEFAULT_SCD4x_T_OFFSET 0
|
||||
|
||||
#define CONFIG_DEFAULT_BAUDRATE_INDEX 0
|
||||
|
||||
#define CONFIG_SERIAL_NUMBER_1_LENGTH 2
|
||||
#define CONFIG_SERIAL_NUMBER_2_LENGTH 2
|
||||
#define CONFIG_MODBUS_ADDR_LENGTH 2
|
||||
#define CONFIG_LTR329_GAIN_LENGHT 2
|
||||
#define CONFIG_LTR329_MODE_LENGTH 2
|
||||
#define CONFIG_LTR329_INTEG_TIME_LENGTH 2
|
||||
#define CONFIG_LTR329_MEAS_RATE_LENGTH 2
|
||||
#define CONFIG_BAUDRATE_INDEX_LENGTH 2
|
||||
#define CONFIG_LED_ON_LENGTH 2
|
||||
#define CONFIG_LED_BRIGHTNESS_LENGTH 2
|
||||
#define CONFIG_LED_SMOOTH_LENGTH 2
|
||||
#define CONFIG_LED_ALERT1_LENGTH 2
|
||||
#define CONFIG_LED_ALERT2_LENGTH 2
|
||||
#define CONFIG_LED_ALERT2_LENGTH 2
|
||||
#define CONFIG_SCD4x_T_OFFSET_LENGTH 2
|
||||
#define VENDOR_NAME_LENGTH 64
|
||||
#define PRODUCT_CODE_LENGTH 64
|
||||
#define PRODUCT_NAME_LENGTH 64
|
||||
@ -77,16 +71,16 @@ config_read(&config);
|
||||
#define EEPROM_ADDR_START ((uint32_t)0x08080000)
|
||||
#define EEPROM_ADDR_END ((uint32_t)0x080803FF)
|
||||
|
||||
#define CONFIG_EEPROM_ADDR_MODBUS_ADDR EEPROM_ADDR_START
|
||||
#define CONFIG_EEPROM_ADDR_SERIAL_NUMBER_1 (EEPROM_ADDR_START)
|
||||
#define CONFIG_EEPROM_ADDR_SERIAL_NUMBER_2 (CONFIG_EEPROM_ADDR_SERIAL_NUMBER_1 + CONFIG_SERIAL_NUMBER_1_LENGTH)
|
||||
#define CONFIG_EEPROM_ADDR_MODBUS_ADDR (CONFIG_EEPROM_ADDR_SERIAL_NUMBER_2 + CONFIG_SERIAL_NUMBER_2_LENGTH)
|
||||
#define CONFIG_EEPROM_ADDR_BAUDRATE_INDEX (CONFIG_EEPROM_ADDR_MODBUS_ADDR + CONFIG_MODBUS_ADDR_LENGTH)
|
||||
#define CONFIG_EEPROM_ADDR_LED_ON (CONFIG_EEPROM_ADDR_BAUDRATE_INDEX + CONFIG_BAUDRATE_INDEX_LENGTH)
|
||||
#define CONFIG_EEPROM_ADDR_LED_BRIGHTNESS (CONFIG_EEPROM_ADDR_LED_ON + CONFIG_LED_ON_LENGTH)
|
||||
#define CONFIG_EEPROM_ADDR_LED_SMOOTH (CONFIG_EEPROM_ADDR_LED_BRIGHTNESS + CONFIG_LED_BRIGHTNESS_LENGTH)
|
||||
#define CONFIG_EEPROM_ADDR_LED_ALERT1 (CONFIG_EEPROM_ADDR_LED_SMOOTH + CONFIG_LED_SMOOTH_LENGTH)
|
||||
#define CONFIG_EEPROM_ADDR_LED_ALERT2 (CONFIG_EEPROM_ADDR_LED_ALERT1 + CONFIG_LED_ALERT1_LENGTH)
|
||||
#define CONFIG_EEPROM_ADDR_SCD4x_T_OFFSET (CONFIG_EEPROM_ADDR_LED_ALERT2 + CONFIG_LED_ALERT2_LENGTH)
|
||||
#define CONFIG_EEPROM_ADDR_LTR329_GAIN (CONFIG_EEPROM_ADDR_BAUDRATE_INDEX + CONFIG_BAUDRATE_INDEX_LENGTH)
|
||||
#define CONFIG_EEPROM_ADDR_LTR329_MODE (CONFIG_EEPROM_ADDR_LTR329_GAIN + CONFIG_LTR329_GAIN_LENGHT)
|
||||
#define CONFIG_EEPROM_ADDR_LTR329_INTEG_TIME (CONFIG_EEPROM_ADDR_LTR329_MODE + CONFIG_LTR329_MODE_LENGTH)
|
||||
#define CONFIG_EEPROM_ADDR_LTR329_MEAS_RATE (CONFIG_EEPROM_ADDR_LTR329_INTEG_TIME + CONFIG_LTR329_INTEG_TIME_LENGTH)
|
||||
|
||||
#define CONFIG_EEPROM_ADDR_VENDOR_NAME (CONFIG_EEPROM_ADDR_SCD4x_T_OFFSET + CONFIG_SCD4x_T_OFFSET_LENGTH)
|
||||
#define CONFIG_EEPROM_ADDR_VENDOR_NAME (CONFIG_EEPROM_ADDR_LTR329_MEAS_RATE + CONFIG_LTR329_MEAS_RATE_LENGTH)
|
||||
#define CONFIG_EEPROM_ADDR_PRODUCT_CODE (CONFIG_EEPROM_ADDR_VENDOR_NAME + VENDOR_NAME_LENGTH)
|
||||
#define CONFIG_EEPROM_ADDR_PRODUCT_NAME (CONFIG_EEPROM_ADDR_PRODUCT_CODE + PRODUCT_CODE_LENGTH)
|
||||
#define CONFIG_EEPROM_ADDR_REVISION (CONFIG_EEPROM_ADDR_PRODUCT_NAME + PRODUCT_NAME_LENGTH)
|
||||
|
||||
@ -53,6 +53,7 @@ extern "C" {
|
||||
#include "sht4x.h"
|
||||
#include "ltr329.h"
|
||||
#include "modbus.h"
|
||||
#include "crc8.h"
|
||||
#include "config.h"
|
||||
/* USER CODE END Includes */
|
||||
|
||||
|
||||
@ -79,7 +79,8 @@ enum
|
||||
REGISTER_NUM_RH = 30005, /* %, from SHT4x */
|
||||
REGISTER_NUM_LIGHT_INTENSITY_0 = 30006, /* ticks, from LTR329 */ /*TODO: Find out what it is */
|
||||
REGISTER_NUM_LIGHT_INTENSITY_1 = 30007, /* ticks, from LTR329 */ /*TODO: Find out what it is */
|
||||
/* VOC Index has initial blackout beriod, when the data is not ready. VOC index is 0 during this period */
|
||||
REGISTER_NUM_ERROR_T_RH = 30008, /* 0 = OK, 1 I2C = ERROR, 2 = CRC ERROR */
|
||||
REGISTER_NUM_ERROR_LIGHT = 30009 /* 0 = OK, 1 = I2C ERROR */
|
||||
} data_registers_numbers;
|
||||
|
||||
enum
|
||||
@ -99,7 +100,7 @@ enum
|
||||
int16_t T_SHT4x, TF_SHT4x;
|
||||
uint16_t RH_SHT4x;
|
||||
uint16_t light_ch0, light_ch1;
|
||||
|
||||
uint16_t error_sht, error_ltr;
|
||||
/* Struct to store the sensor config */
|
||||
config_t sensor_config;
|
||||
/* Device ID struct */
|
||||
@ -108,7 +109,6 @@ uint8_t sensor_config_pending_write = 0;
|
||||
uint8_t baudrate_changed = 0;
|
||||
uint8_t ltr329_config_changed = 0;
|
||||
uint8_t modbus_address_changed = 0;
|
||||
uint8_t co2_valid = 0;
|
||||
|
||||
|
||||
/* USER CODE END PV */
|
||||
@ -267,8 +267,6 @@ int main(void)
|
||||
|
||||
/* Initiualize LTR329 */
|
||||
int8_t ltr_ret;
|
||||
uint8_t ltr_cont_reg_val;
|
||||
uint8_t ltr_rate_reg_val;
|
||||
do
|
||||
{
|
||||
ltr_ret = ltr329_write_settings(LTR329_GAIN_48X, LTR329_MODE_ACTIVE, LTR329_INTEGRATION_100MS, LTR329_MEAS_RATE_100MS);
|
||||
@ -285,7 +283,7 @@ int main(void)
|
||||
sensor_config.ltr329_integ_time = ltr329_int_time;
|
||||
sensor_config.ltr329_meas_rate = ltr329_meas_rate;
|
||||
|
||||
static uint32_t new_baud;
|
||||
/*static uint32_t new_baud;*/
|
||||
/* Enter the main loop */
|
||||
while (1)
|
||||
{
|
||||
@ -329,34 +327,70 @@ int main(void)
|
||||
{
|
||||
while (!LL_USART_IsActiveFlag_TXE(USART2));
|
||||
uart_disable_interrupts();
|
||||
|
||||
LL_USART_SetBaudRate(USART2, SYSTICK_FREQ_HZ, LL_USART_OVERSAMPLING_16, config_baudrates[sensor_config.baudrate_index]);
|
||||
uart_enable_interrupts();
|
||||
LL_USART_SetBaudRate(USART2, SYSTICK_FREQ_HZ, LL_USART_OVERSAMPLING_16,
|
||||
config_baudrates[sensor_config.baudrate_index]);
|
||||
LL_USART_EnableDirectionRx(USART2);
|
||||
LL_USART_EnableDirectionTx(USART2);
|
||||
baudrate_changed = 0;
|
||||
ltr329_config_changed = 0;
|
||||
uart_enable_interrupts();
|
||||
|
||||
new_baud = LL_USART_GetBaudRate(USART2, SYSTICK_FREQ_HZ, LL_USART_OVERSAMPLING_16);
|
||||
/*new_baud = LL_USART_GetBaudRate(USART2, SYSTICK_FREQ_HZ, LL_USART_OVERSAMPLING_16);*/
|
||||
}
|
||||
if(ltr329_config_changed)
|
||||
{
|
||||
ltr329_write_settings(sensor_config.ltr329_gain, sensor_config.ltr329_mode, sensor_config.ltr329_integ_time, sensor_config.ltr329_meas_rate);
|
||||
uart_disable_interrupts();
|
||||
ltr329_write_settings(sensor_config.ltr329_gain,
|
||||
sensor_config.ltr329_mode,
|
||||
sensor_config.ltr329_integ_time,
|
||||
sensor_config.ltr329_meas_rate);
|
||||
ltr329_config_changed = 0;
|
||||
uart_enable_interrupts();
|
||||
}
|
||||
/* It is time for measurement */
|
||||
if (tim21_elapsed_period == 1)
|
||||
{
|
||||
/* TODO: Check the data */
|
||||
/* Read SHT4x data (always connected) */
|
||||
sht4x_measure(&T_SHT4x, &RH_SHT4x);
|
||||
int8_t sht_read_ret = sht4x_measure(&T_SHT4x, &RH_SHT4x);
|
||||
TF_SHT4x = CELSIUS_TO_FAHRENHEIT(T_SHT4x);
|
||||
if (sht_read_ret == SHT4X_OK)
|
||||
{
|
||||
error_sht = 0;
|
||||
} else
|
||||
{
|
||||
/* TODO: Do something */
|
||||
if (sht_read_ret == SHT4X_ERROR)
|
||||
{
|
||||
error_sht = 1;
|
||||
} else if (sht_read_ret == SHT4X_CRC8_ERROR)
|
||||
{
|
||||
error_sht = 2;
|
||||
}
|
||||
}
|
||||
|
||||
/* Red LTR329 values */
|
||||
uint8_t data_valid, new_data;
|
||||
ltr329_gain_t set_gain;
|
||||
ltr_ret = ltr329_read_status_register(&data_valid, &new_data, &set_gain);
|
||||
/* TODO: Do something with the flags */
|
||||
ltr_ret = ltr329_measure(&light_ch0, &light_ch1);
|
||||
if (ltr_ret == LTR329_OK)
|
||||
{
|
||||
if (new_data == 1)
|
||||
{
|
||||
ltr_ret = ltr329_measure(&light_ch0, &light_ch1);
|
||||
if (ltr_ret == LTR329_OK)
|
||||
{
|
||||
error_ltr = 0;
|
||||
} else
|
||||
{
|
||||
error_ltr = 1;
|
||||
}
|
||||
}
|
||||
} else
|
||||
{
|
||||
error_ltr = 1;
|
||||
}
|
||||
|
||||
/* Reset the TIM21 Elapsed Period Flag */
|
||||
tim21_elapsed_period = 0;
|
||||
@ -705,6 +739,12 @@ int8_t modbus_slave_callback(modbus_transaction_t *transaction)
|
||||
case REGISTER_NUM_LIGHT_INTENSITY_1:
|
||||
transaction->input_registers[i] = (uint16_t)light_ch1;
|
||||
break;
|
||||
case REGISTER_NUM_ERROR_T_RH:
|
||||
transaction->input_registers[i] = (uint16_t)error_sht;
|
||||
break;
|
||||
case REGISTER_NUM_ERROR_LIGHT:
|
||||
transaction->input_registers[i] = (uint16_t)error_ltr;
|
||||
break;
|
||||
default:
|
||||
return MODBUS_ERROR_FUNCTION_NOT_IMPLEMENTED;
|
||||
}
|
||||
@ -723,19 +763,15 @@ int8_t modbus_slave_callback(modbus_transaction_t *transaction)
|
||||
break;
|
||||
case REGISTER_NUM_LTR329_GAIN:
|
||||
transaction->holding_registers[i] = (uint16_t)(sensor_config.ltr329_gain);
|
||||
/* TODO : IMPLEMENT */
|
||||
break;
|
||||
case REGISTER_NUM_LTR329_INTEGRATION_TIME:
|
||||
transaction->holding_registers[i] = (uint16_t)(sensor_config.ltr329_integ_time);
|
||||
/* TODO : IMPLEMENT */
|
||||
break;
|
||||
case REGISTER_NUM_LTR329_MEAS_RATE:
|
||||
transaction->holding_registers[i] = (uint16_t)(sensor_config.ltr329_meas_rate);
|
||||
/* TODO : IMPLEMENT */
|
||||
break;
|
||||
case REGISTER_NUM_LTR329_MODE:
|
||||
transaction->holding_registers[i] = (uint16_t)(sensor_config.ltr329_mode);
|
||||
/* TODO : IMPLEMENT */
|
||||
break;
|
||||
default:
|
||||
return MODBUS_ERROR_FUNCTION_NOT_IMPLEMENTED;
|
||||
|
||||
@ -6,7 +6,7 @@ Core/Src/config.o: ../Core/Src/config.c ../Core/Inc/config.h \
|
||||
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
||||
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h \
|
||||
/home/david/VelesLabs/Smart\ Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/ltr329/ltr329.h \
|
||||
/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/ltr329/ltr329.h \
|
||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_i2c.h \
|
||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_utils.h \
|
||||
../Core/Inc/i2c.h
|
||||
@ -27,7 +27,7 @@ Core/Src/config.o: ../Core/Src/config.c ../Core/Inc/config.h \
|
||||
|
||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
||||
|
||||
/home/david/VelesLabs/Smart\ Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/ltr329/ltr329.h:
|
||||
/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/ltr329/ltr329.h:
|
||||
|
||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_i2c.h:
|
||||
|
||||
|
||||
Binary file not shown.
Binary file not shown.
@ -21,10 +21,11 @@ Core/Src/main.o: ../Core/Src/main.c ../Core/Inc/main.h \
|
||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_usart.h \
|
||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_gpio.h \
|
||||
../Core/Inc/i2c.h \
|
||||
/home/david/VelesLabs/Smart\ Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/sht4x/sht4x.h \
|
||||
/home/david/VelesLabs/Smart\ Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/ltr329/ltr329.h \
|
||||
/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/sht4x/sht4x.h \
|
||||
/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/ltr329/ltr329.h \
|
||||
../Core/Inc/i2c.h \
|
||||
/home/david/VelesLabs/Smart\ Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/modbus/modbus.h \
|
||||
/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/modbus/modbus.h \
|
||||
/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/crc8/crc8.h \
|
||||
../Core/Inc/config.h
|
||||
|
||||
../Core/Inc/main.h:
|
||||
@ -73,12 +74,14 @@ Core/Src/main.o: ../Core/Src/main.c ../Core/Inc/main.h \
|
||||
|
||||
../Core/Inc/i2c.h:
|
||||
|
||||
/home/david/VelesLabs/Smart\ Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/sht4x/sht4x.h:
|
||||
/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/sht4x/sht4x.h:
|
||||
|
||||
/home/david/VelesLabs/Smart\ Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/ltr329/ltr329.h:
|
||||
/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/ltr329/ltr329.h:
|
||||
|
||||
../Core/Inc/i2c.h:
|
||||
|
||||
/home/david/VelesLabs/Smart\ Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/modbus/modbus.h:
|
||||
/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/modbus/modbus.h:
|
||||
|
||||
/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/crc8/crc8.h:
|
||||
|
||||
../Core/Inc/config.h:
|
||||
|
||||
Binary file not shown.
@ -45,7 +45,6 @@ stm32l0xx_ll_usart.h:550:22:LL_USART_Disable 16 static
|
||||
stm32l0xx_ll_usart.h:649:22:LL_USART_EnableDirectionRx 32 static,ignoring_inline_asm
|
||||
stm32l0xx_ll_usart.h:671:22:LL_USART_EnableDirectionTx 32 static,ignoring_inline_asm
|
||||
stm32l0xx_ll_usart.h:1608:22:LL_USART_SetBaudRate 32 static
|
||||
stm32l0xx_ll_usart.h:1640:26:LL_USART_GetBaudRate 32 static
|
||||
stm32l0xx_ll_usart.h:2140:22:LL_USART_SetDEDeassertionTime 16 static
|
||||
stm32l0xx_ll_usart.h:2167:22:LL_USART_SetDEAssertionTime 16 static
|
||||
stm32l0xx_ll_usart.h:2193:22:LL_USART_EnableDEMode 16 static
|
||||
@ -68,15 +67,15 @@ main.c:164:8:ltr329_disable_interrupts 8 static
|
||||
main.c:169:8:ltr329_enable_interrupts 8 static
|
||||
main.c:174:6:delay_ms 16 static
|
||||
main.c:184:5:main 32 static
|
||||
main.c:375:6:SystemClock_Config 8 static
|
||||
main.c:428:13:MX_I2C1_Init 72 static
|
||||
main.c:491:13:MX_IWDG_Init 8 static
|
||||
main.c:521:13:MX_TIM21_Init 24 static
|
||||
main.c:560:13:MX_USART2_UART_Init 72 static
|
||||
main.c:645:13:MX_GPIO_Init 8 static
|
||||
main.c:654:6:USART2_TX_Buffer 24 static,ignoring_inline_asm
|
||||
main.c:665:8:uart_disable_interrupts 8 static
|
||||
main.c:674:8:uart_enable_interrupts 8 static
|
||||
main.c:683:8:modbus_slave_callback 32 static
|
||||
main.c:840:8:modbus_transmit_function 16 static
|
||||
main.c:852:6:Error_Handler 8 static,ignoring_inline_asm
|
||||
main.c:409:6:SystemClock_Config 8 static
|
||||
main.c:462:13:MX_I2C1_Init 72 static
|
||||
main.c:525:13:MX_IWDG_Init 8 static
|
||||
main.c:555:13:MX_TIM21_Init 24 static
|
||||
main.c:594:13:MX_USART2_UART_Init 72 static
|
||||
main.c:679:13:MX_GPIO_Init 8 static
|
||||
main.c:688:6:USART2_TX_Buffer 24 static,ignoring_inline_asm
|
||||
main.c:699:8:uart_disable_interrupts 8 static
|
||||
main.c:708:8:uart_enable_interrupts 8 static
|
||||
main.c:717:8:modbus_slave_callback 32 static
|
||||
main.c:876:8:modbus_transmit_function 16 static
|
||||
main.c:888:6:Error_Handler 8 static,ignoring_inline_asm
|
||||
|
||||
@ -21,10 +21,11 @@ Core/Src/stm32l0xx_it.o: ../Core/Src/stm32l0xx_it.c ../Core/Inc/main.h \
|
||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_usart.h \
|
||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_gpio.h \
|
||||
../Core/Inc/i2c.h \
|
||||
/home/david/VelesLabs/Smart\ Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/sht4x/sht4x.h \
|
||||
/home/david/VelesLabs/Smart\ Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/ltr329/ltr329.h \
|
||||
/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/sht4x/sht4x.h \
|
||||
/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/ltr329/ltr329.h \
|
||||
../Core/Inc/i2c.h \
|
||||
/home/david/VelesLabs/Smart\ Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/modbus/modbus.h \
|
||||
/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/modbus/modbus.h \
|
||||
/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/crc8/crc8.h \
|
||||
../Core/Inc/config.h ../Core/Inc/stm32l0xx_it.h
|
||||
|
||||
../Core/Inc/main.h:
|
||||
@ -73,13 +74,15 @@ Core/Src/stm32l0xx_it.o: ../Core/Src/stm32l0xx_it.c ../Core/Inc/main.h \
|
||||
|
||||
../Core/Inc/i2c.h:
|
||||
|
||||
/home/david/VelesLabs/Smart\ Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/sht4x/sht4x.h:
|
||||
/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/sht4x/sht4x.h:
|
||||
|
||||
/home/david/VelesLabs/Smart\ Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/ltr329/ltr329.h:
|
||||
/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/ltr329/ltr329.h:
|
||||
|
||||
../Core/Inc/i2c.h:
|
||||
|
||||
/home/david/VelesLabs/Smart\ Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/modbus/modbus.h:
|
||||
/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/modbus/modbus.h:
|
||||
|
||||
/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/crc8/crc8.h:
|
||||
|
||||
../Core/Inc/config.h:
|
||||
|
||||
|
||||
Binary file not shown.
@ -34,7 +34,7 @@ C_DEPS += \
|
||||
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Core/Src/%.o: ../Core/Src/%.c Core/Src/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DDEBUG -DSTM32L031xx -DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000 -DHSE_STARTUP_TIMEOUT=100 -DLSE_STARTUP_TIMEOUT=5000 -DLSE_VALUE=32768 -DMSI_VALUE=2097000 -DHSI_VALUE=16000000 -DLSI_VALUE=37000 -DVDD_VALUE=3300 -DPREFETCH_ENABLE=0 -DINSTRUCTION_CACHE_ENABLE=1 -DDATA_CACHE_ENABLE=1 -c -I../Core/Inc -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/crc8" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/ltr329" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/modbus" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/sht4x" -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DDEBUG -DSTM32L031xx -DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000 -DHSE_STARTUP_TIMEOUT=100 -DLSE_STARTUP_TIMEOUT=5000 -DLSE_VALUE=32768 -DMSI_VALUE=2097000 -DHSI_VALUE=16000000 -DLSI_VALUE=37000 -DVDD_VALUE=3300 -DPREFETCH_ENABLE=0 -DINSTRUCTION_CACHE_ENABLE=1 -DDATA_CACHE_ENABLE=1 -c -I../Core/Inc -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/crc8" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/ltr329" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/modbus" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/sht4x" -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
|
||||
clean: clean-Core-2f-Src
|
||||
|
||||
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@ -16,7 +16,7 @@ S_DEPS += \
|
||||
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Core/Startup/%.o: ../Core/Startup/%.s Core/Startup/subdir.mk
|
||||
arm-none-eabi-gcc -mcpu=cortex-m0plus -g3 -DDEBUG -c -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/crc8" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/ltr329" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/modbus" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/sht4x" -x assembler-with-cpp -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" "$<"
|
||||
arm-none-eabi-gcc -mcpu=cortex-m0plus -g3 -DDEBUG -c -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/crc8" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/ltr329" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/modbus" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/sht4x" -x assembler-with-cpp -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" "$<"
|
||||
|
||||
clean: clean-Core-2f-Startup
|
||||
|
||||
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@ -40,7 +40,7 @@ C_DEPS += \
|
||||
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Drivers/STM32L0xx_HAL_Driver/Src/%.o: ../Drivers/STM32L0xx_HAL_Driver/Src/%.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DDEBUG -DSTM32L031xx -DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000 -DHSE_STARTUP_TIMEOUT=100 -DLSE_STARTUP_TIMEOUT=5000 -DLSE_VALUE=32768 -DMSI_VALUE=2097000 -DHSI_VALUE=16000000 -DLSI_VALUE=37000 -DVDD_VALUE=3300 -DPREFETCH_ENABLE=0 -DINSTRUCTION_CACHE_ENABLE=1 -DDATA_CACHE_ENABLE=1 -c -I../Core/Inc -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/crc8" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/ltr329" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/modbus" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/sht4x" -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DDEBUG -DSTM32L031xx -DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000 -DHSE_STARTUP_TIMEOUT=100 -DLSE_STARTUP_TIMEOUT=5000 -DLSE_VALUE=32768 -DMSI_VALUE=2097000 -DHSI_VALUE=16000000 -DLSI_VALUE=37000 -DVDD_VALUE=3300 -DPREFETCH_ENABLE=0 -DINSTRUCTION_CACHE_ENABLE=1 -DDATA_CACHE_ENABLE=1 -c -I../Core/Inc -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/crc8" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/ltr329" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/modbus" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/sht4x" -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
|
||||
clean: clean-Drivers-2f-STM32L0xx_HAL_Driver-2f-Src
|
||||
|
||||
|
||||
Binary file not shown.
@ -16,7 +16,7 @@ C_DEPS += \
|
||||
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Libs/crc8/%.o: ../Libs/crc8/%.c Libs/crc8/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DDEBUG -DSTM32L031xx -DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000 -DHSE_STARTUP_TIMEOUT=100 -DLSE_STARTUP_TIMEOUT=5000 -DLSE_VALUE=32768 -DMSI_VALUE=2097000 -DHSI_VALUE=16000000 -DLSI_VALUE=37000 -DVDD_VALUE=3300 -DPREFETCH_ENABLE=0 -DINSTRUCTION_CACHE_ENABLE=1 -DDATA_CACHE_ENABLE=1 -c -I../Core/Inc -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/crc8" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/ltr329" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/modbus" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/sht4x" -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DDEBUG -DSTM32L031xx -DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000 -DHSE_STARTUP_TIMEOUT=100 -DLSE_STARTUP_TIMEOUT=5000 -DLSE_VALUE=32768 -DMSI_VALUE=2097000 -DHSI_VALUE=16000000 -DLSI_VALUE=37000 -DVDD_VALUE=3300 -DPREFETCH_ENABLE=0 -DINSTRUCTION_CACHE_ENABLE=1 -DDATA_CACHE_ENABLE=1 -c -I../Core/Inc -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/crc8" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/ltr329" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/modbus" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/sht4x" -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
|
||||
clean: clean-Libs-2f-crc8
|
||||
|
||||
|
||||
Binary file not shown.
@ -1,8 +1,8 @@
|
||||
ltr329.c:22:15:ltr329_read_register 40 static
|
||||
ltr329.c:50:15:ltr329_write_register 32 static
|
||||
ltr329.c:68:8:ltr329_write_settings 32 static
|
||||
ltr329.c:87:8:ltr329_read_settings 48 static
|
||||
ltr329.c:120:8:ltr329_sw_reset 24 static
|
||||
ltr329.c:132:8:ltr329_measure 24 static
|
||||
ltr329.c:162:8:ltr329_read_status_register 40 static
|
||||
ltr329.c:200:8:ltr329_read_device_info 32 static
|
||||
ltr329.c:25:15:ltr329_read_register 40 static
|
||||
ltr329.c:53:15:ltr329_write_register 32 static
|
||||
ltr329.c:71:8:ltr329_write_settings 32 static
|
||||
ltr329.c:90:8:ltr329_read_settings 48 static
|
||||
ltr329.c:123:8:ltr329_sw_reset 24 static
|
||||
ltr329.c:135:8:ltr329_measure 24 static
|
||||
ltr329.c:165:8:ltr329_read_status_register 40 static
|
||||
ltr329.c:203:8:ltr329_read_device_info 32 static
|
||||
|
||||
@ -16,7 +16,7 @@ C_DEPS += \
|
||||
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Libs/ltr329/%.o: ../Libs/ltr329/%.c Libs/ltr329/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DDEBUG -DSTM32L031xx -DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000 -DHSE_STARTUP_TIMEOUT=100 -DLSE_STARTUP_TIMEOUT=5000 -DLSE_VALUE=32768 -DMSI_VALUE=2097000 -DHSI_VALUE=16000000 -DLSI_VALUE=37000 -DVDD_VALUE=3300 -DPREFETCH_ENABLE=0 -DINSTRUCTION_CACHE_ENABLE=1 -DDATA_CACHE_ENABLE=1 -c -I../Core/Inc -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/crc8" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/ltr329" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/modbus" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/sht4x" -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DDEBUG -DSTM32L031xx -DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000 -DHSE_STARTUP_TIMEOUT=100 -DLSE_STARTUP_TIMEOUT=5000 -DLSE_VALUE=32768 -DMSI_VALUE=2097000 -DHSI_VALUE=16000000 -DLSI_VALUE=37000 -DVDD_VALUE=3300 -DPREFETCH_ENABLE=0 -DINSTRUCTION_CACHE_ENABLE=1 -DDATA_CACHE_ENABLE=1 -c -I../Core/Inc -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/crc8" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/ltr329" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/modbus" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/sht4x" -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
|
||||
clean: clean-Libs-2f-ltr329
|
||||
|
||||
|
||||
Binary file not shown.
@ -16,7 +16,7 @@ C_DEPS += \
|
||||
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Libs/modbus/%.o: ../Libs/modbus/%.c Libs/modbus/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DDEBUG -DSTM32L031xx -DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000 -DHSE_STARTUP_TIMEOUT=100 -DLSE_STARTUP_TIMEOUT=5000 -DLSE_VALUE=32768 -DMSI_VALUE=2097000 -DHSI_VALUE=16000000 -DLSI_VALUE=37000 -DVDD_VALUE=3300 -DPREFETCH_ENABLE=0 -DINSTRUCTION_CACHE_ENABLE=1 -DDATA_CACHE_ENABLE=1 -c -I../Core/Inc -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/crc8" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/ltr329" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/modbus" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/sht4x" -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DDEBUG -DSTM32L031xx -DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000 -DHSE_STARTUP_TIMEOUT=100 -DLSE_STARTUP_TIMEOUT=5000 -DLSE_VALUE=32768 -DMSI_VALUE=2097000 -DHSI_VALUE=16000000 -DLSI_VALUE=37000 -DVDD_VALUE=3300 -DPREFETCH_ENABLE=0 -DINSTRUCTION_CACHE_ENABLE=1 -DDATA_CACHE_ENABLE=1 -c -I../Core/Inc -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/crc8" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/ltr329" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/modbus" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/sht4x" -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
|
||||
clean: clean-Libs-2f-modbus
|
||||
|
||||
|
||||
Binary file not shown.
@ -16,7 +16,7 @@ C_DEPS += \
|
||||
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Libs/sht4x/%.o: ../Libs/sht4x/%.c Libs/sht4x/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DDEBUG -DSTM32L031xx -DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000 -DHSE_STARTUP_TIMEOUT=100 -DLSE_STARTUP_TIMEOUT=5000 -DLSE_VALUE=32768 -DMSI_VALUE=2097000 -DHSI_VALUE=16000000 -DLSI_VALUE=37000 -DVDD_VALUE=3300 -DPREFETCH_ENABLE=0 -DINSTRUCTION_CACHE_ENABLE=1 -DDATA_CACHE_ENABLE=1 -c -I../Core/Inc -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/crc8" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/ltr329" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/modbus" -I"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/Libs/sht4x" -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DDEBUG -DSTM32L031xx -DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000 -DHSE_STARTUP_TIMEOUT=100 -DLSE_STARTUP_TIMEOUT=5000 -DLSE_VALUE=32768 -DMSI_VALUE=2097000 -DHSI_VALUE=16000000 -DLSI_VALUE=37000 -DVDD_VALUE=3300 -DPREFETCH_ENABLE=0 -DINSTRUCTION_CACHE_ENABLE=1 -DDATA_CACHE_ENABLE=1 -c -I../Core/Inc -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/crc8" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/ltr329" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/modbus" -I"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/Libs/sht4x" -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
|
||||
clean: clean-Libs-2f-sht4x
|
||||
|
||||
|
||||
@ -64,8 +64,8 @@ all: main-build
|
||||
main-build: rht_wired_sensor.elf secondary-outputs
|
||||
|
||||
# Tool invocations
|
||||
rht_wired_sensor.elf: $(OBJS) $(USER_OBJS) /home/david/VelesLabs/Smart\ Household/wired_sensors/RHT_Wired_Sensor/fw/STM32L031G6UX_FLASH.ld makefile objects.list $(OPTIONAL_TOOL_DEPS)
|
||||
arm-none-eabi-gcc -o "rht_wired_sensor.elf" @"objects.list" $(USER_OBJS) $(LIBS) -mcpu=cortex-m0plus -T"/home/david/VelesLabs/Smart Household/wired_sensors/RHT_Wired_Sensor/fw/STM32L031G6UX_FLASH.ld" --specs=nosys.specs -Wl,-Map="rht_wired_sensor.map" -Wl,--gc-sections -static --specs=nano.specs -mfloat-abi=soft -mthumb -Wl,--start-group -lc -lm -Wl,--end-group
|
||||
rht_wired_sensor.elf: $(OBJS) $(USER_OBJS) /home/david/VelesLabs/smart_household/rht_sensor_wired/fw/STM32L031G6UX_FLASH.ld makefile objects.list $(OPTIONAL_TOOL_DEPS)
|
||||
arm-none-eabi-gcc -o "rht_wired_sensor.elf" @"objects.list" $(USER_OBJS) $(LIBS) -mcpu=cortex-m0plus -T"/home/david/VelesLabs/smart_household/rht_sensor_wired/fw/STM32L031G6UX_FLASH.ld" --specs=nosys.specs -Wl,-Map="rht_wired_sensor.map" -Wl,--gc-sections -static --specs=nano.specs -mfloat-abi=soft -mthumb -Wl,--start-group -lc -lm -Wl,--end-group
|
||||
@echo 'Finished building target: $@'
|
||||
@echo ' '
|
||||
|
||||
|
||||
Binary file not shown.
Binary file not shown.
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@ -1 +1 @@
|
||||
Subproject commit 05ed8c25c956c210948ef9f80cf9b78bd90014d4
|
||||
Subproject commit 58750375916204d53c6cb7476eea77d966b7c382
|
||||
Loading…
Reference in New Issue
Block a user