mj
|
6bede12d21
|
Fixed wrong buffer processing
|
2021-12-22 18:19:53 +01:00 |
|
David Žaitlík
|
c12042dd2d
|
Minor changes. Regenerated gerbers.
|
2021-12-22 18:06:19 +01:00 |
|
David Žaitlík
|
dad8c8507b
|
Smallchanges to the pcb.
|
2021-12-22 17:34:59 +01:00 |
|
mj
|
e36c06aae8
|
Fixed non-deterministic buffer pos increments
|
2021-12-22 17:18:43 +01:00 |
|
mj
|
0ed535bb76
|
Modbus read device id
|
2021-12-22 17:12:14 +01:00 |
|
mj
|
6dbbccec33
|
Modbus refactor
|
2021-12-05 16:36:41 +01:00 |
|
mj
|
13e1ba0ab1
|
Added concentrator script
|
2021-11-27 18:32:03 +01:00 |
|
mj
|
1de3c05fea
|
WIP python scripts
|
2021-11-27 16:07:06 +01:00 |
|
mj
|
3d2dc18d34
|
WIP test scripts
|
2021-11-26 21:33:22 +01:00 |
|
mj
|
998740b147
|
Minor changes to README
|
2021-11-26 21:18:55 +01:00 |
|
mj
|
eb232eaf5a
|
Moved old script to folder "old"
|
2021-11-26 21:15:24 +01:00 |
|
mj
|
4cf93cdc89
|
Added README.md for test folder
|
2021-11-26 21:08:30 +01:00 |
|
mj
|
cfb945408e
|
Added script query_device.py
|
2021-11-26 20:34:32 +01:00 |
|
David Žaitlík
|
1bcbae877b
|
Added SGP40
|
2021-11-24 22:47:00 +01:00 |
|
David Žaitlík
|
4e46eb1f30
|
Minor changes in silkscreen and testpoints.
|
2021-11-24 19:33:22 +01:00 |
|
mj
|
5185544f12
|
Added new search script find_device.py
|
2021-11-24 16:14:16 +01:00 |
|
mj
|
e062ab640b
|
Added sanity check for MODBUS holding registers
Also changed default led smoothing to 1
|
2021-11-24 14:02:56 +01:00 |
|
David Žaitlík
|
86580f2185
|
Minor tweaks.:
|
2021-11-20 11:51:12 +01:00 |
|
David Žaitlík
|
4166c27185
|
Changed the PCB to 4 layers.
|
2021-11-20 11:46:26 +01:00 |
|
mj
|
3912a22467
|
Changed LED smooth transition to two intervals
|
2021-11-18 22:29:25 +01:00 |
|
mj
|
0061723472
|
Added LED intensity
|
2021-11-18 21:30:03 +01:00 |
|
mj
|
bb274d367a
|
Linear change of LED color according to CO2 level
|
2021-11-18 19:56:23 +01:00 |
|
David Žaitlík
|
c2a67d173d
|
Connected MODE pin of the PMICs to GND for continuous PWM operation. Minor tweaks to schematic (some components and nets were on the 0.635m
grid.
|
2021-11-17 21:17:15 +01:00 |
|
David Žaitlík
|
5f8cb1635e
|
Changed the EEPROM end address to fit the new MCU (it is twice as big).
|
2021-11-17 20:58:18 +01:00 |
|
mj
|
555861e27c
|
Added exception handling for MODBUS checksum error
|
2021-11-15 16:32:08 +01:00 |
|
David Žaitlík
|
c8f12ffb4a
|
Added breakaway tabs and fiducials.
|
2021-11-14 14:06:21 +01:00 |
|
David Žaitlík
|
ee0a882c5f
|
Moved some testpoints to the top layer and made them smaller. Minor layout change of the fuses (the components were too close to the pcb edge). Removed old iBOMs.
|
2021-11-14 12:05:18 +01:00 |
|
Your Name
|
11e7c8c124
|
Added error counting to measure_multiple_devices.py
|
2021-11-13 22:16:38 +01:00 |
|
Your Name
|
852de86755
|
Used rgbled_set_color() for CO2 value indication
|
2021-11-13 21:49:02 +01:00 |
|
Your Name
|
235ca259f1
|
Fixed UART interrupt disable/enable during sensor readout
|
2021-11-13 21:47:57 +01:00 |
|
Your Name
|
62cfa66b80
|
Removed debug infinite loop
|
2021-11-13 21:23:10 +01:00 |
|
Your Name
|
32746c111f
|
RGB LED: improved set_color
|
2021-11-13 21:21:58 +01:00 |
|
Your Name
|
464dbc78e4
|
LED PWM WIP
|
2021-11-11 19:59:53 +01:00 |
|
Your Name
|
4536d4003f
|
Basic RGB LED implementation + minor changes
|
2021-11-11 19:21:15 +01:00 |
|
David Žaitlík
|
995d6f4e57
|
Minor tweaks trying to get the i2c working. SCD4x still not working.
|
2021-11-07 11:23:52 +01:00 |
|
David Žaitlík
|
dc3e7c8288
|
Merge branch 'master' of gitlab.com:HDIoT/smart_household/wired_sensors/iaq_wired_sensor
|
2021-11-06 11:26:23 +01:00 |
|
David Žaitlík
|
9e0f2523b7
|
Prepared HAL FW. Started reimplementing I2C.
|
2021-11-06 11:26:08 +01:00 |
|
Your Name
|
c0c7e72401
|
Catch modbus checksum error exception
|
2021-11-04 19:11:05 +01:00 |
|
Your Name
|
f45fca91fb
|
Fixed uart interrupt enable/disable
|
2021-11-04 19:02:42 +01:00 |
|
Your Name
|
3ff1369352
|
Fixed reversed interrupt enable/disable in sensor readout
|
2021-11-04 18:23:21 +01:00 |
|
David Žaitlík
|
94b6d6eada
|
Changed revision in silkscreen (Ordered boards are with a mistake - rev.1)
|
2021-10-30 21:23:52 +02:00 |
|
David Žaitlík
|
8382658a42
|
Redesigned with RS485 transceiver in SOIC8 package.
|
2021-10-30 21:22:20 +02:00 |
|
dooku
|
33b6d3a692
|
Fixed missing tab
|
2021-10-24 20:13:13 +02:00 |
|
dooku
|
22a5f735b3
|
Fixed minor test script bugs
|
2021-10-24 20:02:32 +02:00 |
|
David Žaitlík
|
bb3b6ada06
|
Moved the old firmware for STM32L011 to fw_old and migrated the firmware to STM32L031 in fw. I2C and TIM21 seem functional. USART2 is receiving correctly, but the modbus test is not receiving messages.
|
2021-10-21 22:45:22 +02:00 |
|
David Žaitlík
|
8445a1100c
|
Generated iBOM.
|
2021-10-21 20:15:56 +02:00 |
|
Duke NUCem
|
d387caecad
|
Added measurement script for multiple devices
|
2021-10-20 20:38:37 +02:00 |
|
Duke NUCem
|
a5c9eb180d
|
Added baud sweep to find_address.py
|
2021-10-20 20:04:49 +02:00 |
|
Duke NUCem
|
8776a84678
|
Added script for MODBUS device search
|
2021-10-20 19:55:25 +02:00 |
|
Duke NUCem
|
a290f52d4d
|
Disable UART IRQs during sensor readout
|
2021-10-20 18:14:13 +02:00 |
|