2.4 KiB
2.4 KiB
Test scripts
These are obsolete - please refer to Python package
Python scripts used for sensor reading, configuring and automated testing. All scripts assume that 485 converter device file is /dev/rs485.
User scripts
Following scripts are meant to be used by user for sensor search, read and config (write).
find_device.py
Search for device over all combinations of given baudrates and addresses. If no arguments are given, script tries all possible combinations (which takes really long time).
Usage:
./find_device.py [ -a [{FIRST_ADDR-LAST_ADDR | ADDR} ...] ] [ -b [BAUD ...]]
Examples:
Complete search (slow!):
./find_device.py
Look for devices 123,10,56 at baudrates 19200,115200:
./find_device.py -a 123 10 56 -b 19200 115200
Look for devices 10-55 at baudrate 19200:
./find_device.py -a 10-55 -b 19200
Look for device 1-10 and 55 at baudrate 115200:
./find_device.py -a 1-10 55 -b 115200
Look for device 1-10 at all possible baudrates:
./find_device.py -a 1-10 55
query_device.py
Script for interaction with sensor. Allows reading from input register and read/write access to holding registers.
Usage:
./query_device.py ADDR [BAUDRATE] [{read [REGISTER ...] | write VALUE REGISTER}]
where:
- ADDR is Modbus address (use 0 for broadcast; note that only write can be broadcast)
- BAUDRATE is (optional) baud rate; default value is 19200
- action can be "read", "write" or can be omitted (defaults to "read all")
- REGISTER can be either human-friendly register name (e.g. "CO2") or register number (30001)
- read may have list of REGISTER arguments (combining both register numbers and names)
- VALUE is 16-bit integer in decimal format
- to get list of human-friendly names just read all registers from sensor (run script with address only)
Examples
Read all registers from sensor 247, default baud rate:
./query_device.py 247
Read only CO2 register from sensor 123, baudrate 4800:
./query_device.py 123 4800 read CO2
Read CO2, T_SHT4x and RH_SCD4x from sensor 222, default baudrate:
./query_device.py 222 read CO2 T_SHT4x RH_SCD4x
Turn LED off for sensor 247, baud 115200:
./query_device.py 247 115200 write 0 LED_on_register
Set brightness of all connected sensors to 50%:
./query_device.py 0 write 50 LED_brightness_register