David Žaitlík 4166c27185 Changed the PCB to 4 layers.

2021-11-20 11:46:26 +01:00

..

Project_Outputs

Added breakaway tabs and fiducials.

2021-11-14 14:06:21 +01:00

fp-info-cache

Added breakaway tabs and fiducials.

2021-11-14 14:06:21 +01:00

iaq_wired_sensor-cache.lib

Added breakaway tabs and fiducials.

2021-11-14 14:06:21 +01:00

iaq_wired_sensor-rescue.dcm

Moved the firmware from HAL to LL.

2021-06-07 16:40:28 +02:00

iaq_wired_sensor-rescue.lib

Moved the firmware from HAL to LL.

2021-06-07 16:40:28 +02:00

iaq_wired_sensor.csv

Moved the firmware from HAL to LL.

2021-06-07 16:40:28 +02:00

iaq_wired_sensor.kicad_pcb

Changed the PCB to 4 layers.

2021-11-20 11:46:26 +01:00

iaq_wired_sensor.kicad_pcb-bak

Changed the PCB to 4 layers.

2021-11-20 11:46:26 +01:00

iaq_wired_sensor.pro

Changed the PCB to 4 layers.

2021-11-20 11:46:26 +01:00

iaq_wired_sensor.sch

Connected MODE pin of the PMICs to GND for continuous PWM operation. Minor tweaks to schematic (some components and nets were on the 0.635m

2021-11-17 21:17:15 +01:00

iaq_wired_sensor.sch-bak

Added breakaway tabs and fiducials.

2021-11-14 14:06:21 +01:00

iaq_wired_sensor.step

Minor changes.

2021-09-28 16:12:59 +02:00

iaq_wired_sensor.wrl

Minor changes.

2021-09-28 16:12:59 +02:00

iaq_wired_sensor.xml

Found a mistake in the footprint.

2021-03-11 21:06:35 +01:00

sym-lib-table

Moved some testpoints to the top layer and made them smaller. Minor layout change of the fuses (the components were too close to the pcb edge). Removed old iBOMs.

2021-11-14 12:05:18 +01:00