Switched RCC form HAL to LL.
This commit is contained in:
David Žaitlík
parent
e0417166f4
commit
c0e81d7cad
52
fw/.cproject
52
fw/.cproject
@ -47,7 +47,7 @@
|
|||||||
|
|
||||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.1992458385" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="genericBoard" valueType="string"/>
|
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.1992458385" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="genericBoard" valueType="string"/>
|
||||||
|
|
||||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.1211256952" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.4 || Debug || true || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.base.gnu-tools-for-stm32 || STM32L011F4Ux || 0 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../Drivers/CMSIS/Include | ../Core/Inc | ../Drivers/STM32L0xx_HAL_Driver/Inc | ../Drivers/CMSIS/Device/ST/STM32L0xx/Include | ../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy || || || USE_HAL_DRIVER | STM32L011xx | USE_FULL_LL_DRIVER || || Drivers | Core/Startup | Core || || || ${workspace_loc:/${ProjName}/STM32L011F4UX_FLASH.ld} || true || NonSecure || || secure_nsclib.o || || None" valueType="string"/>
|
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.1211256952" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.4 || Debug || true || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.base.gnu-tools-for-stm32 || STM32L011F4Ux || 0 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../Drivers/CMSIS/Include | ../Core/Inc | ../Drivers/STM32L0xx_HAL_Driver/Inc | ../Drivers/CMSIS/Device/ST/STM32L0xx/Include || || || STM32L011xx | USE_FULL_LL_DRIVER | HSE_VALUE=8000000 | HSE_STARTUP_TIMEOUT=100 | LSE_STARTUP_TIMEOUT=5000 | LSE_VALUE=32768 | MSI_VALUE=2097000 | HSI_VALUE=16000000 | LSI_VALUE=37000 | VDD_VALUE=3300 | PREFETCH_ENABLE=0 | INSTRUCTION_CACHE_ENABLE=1 | DATA_CACHE_ENABLE=1 || || Drivers | Core/Startup | Core || || || ${workspace_loc:/${ProjName}/STM32L011F4UX_FLASH.ld} || true || NonSecure || || secure_nsclib.o || || None" valueType="string"/>
|
||||||
|
|
||||||
<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.445833440" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
|
<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.445833440" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
|
||||||
|
|
||||||
@ -75,7 +75,27 @@
|
|||||||
|
|
||||||
<listOptionValue builtIn="false" value="USE_FULL_LL_DRIVER"/>
|
<listOptionValue builtIn="false" value="USE_FULL_LL_DRIVER"/>
|
||||||
|
|
||||||
<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
|
<listOptionValue builtIn="false" value="HSE_VALUE=8000000"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="HSE_STARTUP_TIMEOUT=100"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="LSE_STARTUP_TIMEOUT=5000"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="LSE_VALUE=32768"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="MSI_VALUE=2097000"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="HSI_VALUE=16000000"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="LSI_VALUE=37000"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="VDD_VALUE=3300"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="PREFETCH_ENABLE=0"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="INSTRUCTION_CACHE_ENABLE=1"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="DATA_CACHE_ENABLE=1"/>
|
||||||
|
|
||||||
</option>
|
</option>
|
||||||
|
|
||||||
@ -88,8 +108,6 @@
|
|||||||
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32L0xx/Include"/>
|
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32L0xx/Include"/>
|
||||||
|
|
||||||
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include"/>
|
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include"/>
|
||||||
|
|
||||||
<listOptionValue builtIn="false" value="../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy"/>
|
|
||||||
|
|
||||||
</option>
|
</option>
|
||||||
|
|
||||||
@ -201,7 +219,7 @@
|
|||||||
|
|
||||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.1944321553" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="genericBoard" valueType="string"/>
|
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board.1944321553" name="Board" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.target_board" useByScannerDiscovery="false" value="genericBoard" valueType="string"/>
|
||||||
|
|
||||||
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.1781594695" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.4 || Release || false || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.base.gnu-tools-for-stm32 || STM32L011F4Ux || 0 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../Drivers/CMSIS/Include | ../Core/Inc | ../Drivers/STM32L0xx_HAL_Driver/Inc | ../Drivers/CMSIS/Device/ST/STM32L0xx/Include | ../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy || || || USE_HAL_DRIVER | STM32L011xx | USE_FULL_LL_DRIVER || || Drivers | Core/Startup | Core || || || ${workspace_loc:/${ProjName}/STM32L011F4UX_FLASH.ld} || true || NonSecure || || secure_nsclib.o || || None" valueType="string"/>
|
<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults.1781594695" name="Defaults" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.option.defaults" useByScannerDiscovery="false" value="com.st.stm32cube.ide.common.services.build.inputs.revA.1.0.4 || Release || false || Executable || com.st.stm32cube.ide.mcu.gnu.managedbuild.toolchain.base.gnu-tools-for-stm32 || STM32L011F4Ux || 0 || 0 || arm-none-eabi- || ${gnu_tools_for_stm32_compiler_path} || ../Drivers/CMSIS/Include | ../Core/Inc | ../Drivers/STM32L0xx_HAL_Driver/Inc | ../Drivers/CMSIS/Device/ST/STM32L0xx/Include || || || STM32L011xx | USE_FULL_LL_DRIVER | HSE_VALUE=8000000 | HSE_STARTUP_TIMEOUT=100 | LSE_STARTUP_TIMEOUT=5000 | LSE_VALUE=32768 | MSI_VALUE=2097000 | HSI_VALUE=16000000 | LSI_VALUE=37000 | VDD_VALUE=3300 | PREFETCH_ENABLE=0 | INSTRUCTION_CACHE_ENABLE=1 | DATA_CACHE_ENABLE=1 || || Drivers | Core/Startup | Core || || || ${workspace_loc:/${ProjName}/STM32L011F4UX_FLASH.ld} || true || NonSecure || || secure_nsclib.o || || None" valueType="string"/>
|
||||||
|
|
||||||
<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.1728902878" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
|
<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform.1728902878" isAbstract="false" osList="all" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.targetplatform"/>
|
||||||
|
|
||||||
@ -227,7 +245,27 @@
|
|||||||
|
|
||||||
<listOptionValue builtIn="false" value="USE_FULL_LL_DRIVER"/>
|
<listOptionValue builtIn="false" value="USE_FULL_LL_DRIVER"/>
|
||||||
|
|
||||||
<listOptionValue builtIn="false" value="USE_HAL_DRIVER"/>
|
<listOptionValue builtIn="false" value="HSE_VALUE=8000000"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="HSE_STARTUP_TIMEOUT=100"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="LSE_STARTUP_TIMEOUT=5000"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="LSE_VALUE=32768"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="MSI_VALUE=2097000"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="HSI_VALUE=16000000"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="LSI_VALUE=37000"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="VDD_VALUE=3300"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="PREFETCH_ENABLE=0"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="INSTRUCTION_CACHE_ENABLE=1"/>
|
||||||
|
|
||||||
|
<listOptionValue builtIn="false" value="DATA_CACHE_ENABLE=1"/>
|
||||||
|
|
||||||
</option>
|
</option>
|
||||||
|
|
||||||
@ -240,8 +278,6 @@
|
|||||||
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32L0xx/Include"/>
|
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Device/ST/STM32L0xx/Include"/>
|
||||||
|
|
||||||
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include"/>
|
<listOptionValue builtIn="false" value="../Drivers/CMSIS/Include"/>
|
||||||
|
|
||||||
<listOptionValue builtIn="false" value="../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy"/>
|
|
||||||
|
|
||||||
</option>
|
</option>
|
||||||
|
|
||||||
|
|||||||
File diff suppressed because one or more lines are too long
@ -28,19 +28,23 @@ extern "C" {
|
|||||||
#endif
|
#endif
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
/* Includes ------------------------------------------------------------------*/
|
||||||
#include "stm32l0xx_hal.h"
|
|
||||||
#include "stm32l0xx_ll_dma.h"
|
#include "stm32l0xx_ll_dma.h"
|
||||||
#include "stm32l0xx.h"
|
#include "stm32l0xx.h"
|
||||||
#include "stm32l0xx_ll_i2c.h"
|
#include "stm32l0xx_ll_i2c.h"
|
||||||
#include "stm32l0xx_ll_lpuart.h"
|
#include "stm32l0xx_ll_lpuart.h"
|
||||||
#include "stm32l0xx_ll_rcc.h"
|
#include "stm32l0xx_ll_rcc.h"
|
||||||
#include "stm32l0xx_ll_system.h"
|
#include "stm32l0xx_ll_crs.h"
|
||||||
#include "stm32l0xx_ll_gpio.h"
|
|
||||||
#include "stm32l0xx_ll_exti.h"
|
|
||||||
#include "stm32l0xx_ll_bus.h"
|
#include "stm32l0xx_ll_bus.h"
|
||||||
|
#include "stm32l0xx_ll_system.h"
|
||||||
|
#include "stm32l0xx_ll_exti.h"
|
||||||
#include "stm32l0xx_ll_cortex.h"
|
#include "stm32l0xx_ll_cortex.h"
|
||||||
#include "stm32l0xx_ll_utils.h"
|
#include "stm32l0xx_ll_utils.h"
|
||||||
#include "stm32l0xx_ll_pwr.h"
|
#include "stm32l0xx_ll_pwr.h"
|
||||||
|
#include "stm32l0xx_ll_gpio.h"
|
||||||
|
|
||||||
|
#if defined(USE_FULL_ASSERT)
|
||||||
|
#include "stm32_assert.h"
|
||||||
|
#endif /* USE_FULL_ASSERT */
|
||||||
|
|
||||||
/* Private includes ----------------------------------------------------------*/
|
/* Private includes ----------------------------------------------------------*/
|
||||||
/* USER CODE BEGIN Includes */
|
/* USER CODE BEGIN Includes */
|
||||||
@ -75,6 +79,18 @@ void Error_Handler(void);
|
|||||||
#define LED_G_GPIO_Port GPIOA
|
#define LED_G_GPIO_Port GPIOA
|
||||||
#define LED_R_Pin LL_GPIO_PIN_7
|
#define LED_R_Pin LL_GPIO_PIN_7
|
||||||
#define LED_R_GPIO_Port GPIOA
|
#define LED_R_GPIO_Port GPIOA
|
||||||
|
#ifndef NVIC_PRIORITYGROUP_0
|
||||||
|
#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bit for pre-emption priority,
|
||||||
|
4 bits for subpriority */
|
||||||
|
#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bit for pre-emption priority,
|
||||||
|
3 bits for subpriority */
|
||||||
|
#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority,
|
||||||
|
2 bits for subpriority */
|
||||||
|
#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority,
|
||||||
|
1 bit for subpriority */
|
||||||
|
#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority,
|
||||||
|
0 bit for subpriority */
|
||||||
|
#endif
|
||||||
/* USER CODE BEGIN Private defines */
|
/* USER CODE BEGIN Private defines */
|
||||||
|
|
||||||
/* USER CODE END Private defines */
|
/* USER CODE END Private defines */
|
||||||
|
|||||||
@ -1,330 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_conf.h
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief HAL configuration template file.
|
|
||||||
* This file should be copied to the application folder and renamed
|
|
||||||
* to stm32l0xx_hal_conf.h.
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
||||||
#ifndef __STM32L0xx_HAL_CONF_H
|
|
||||||
#define __STM32L0xx_HAL_CONF_H
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
extern "C" {
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* Exported types ------------------------------------------------------------*/
|
|
||||||
/* Exported constants --------------------------------------------------------*/
|
|
||||||
|
|
||||||
/* ########################## Module Selection ############################## */
|
|
||||||
/**
|
|
||||||
* @brief This is the list of modules to be used in the HAL driver
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define HAL_MODULE_ENABLED
|
|
||||||
/*#define HAL_ADC_MODULE_ENABLED */
|
|
||||||
/*#define HAL_CRYP_MODULE_ENABLED */
|
|
||||||
/*#define HAL_COMP_MODULE_ENABLED */
|
|
||||||
/*#define HAL_CRC_MODULE_ENABLED */
|
|
||||||
/*#define HAL_CRYP_MODULE_ENABLED */
|
|
||||||
/*#define HAL_DAC_MODULE_ENABLED */
|
|
||||||
/*#define HAL_FIREWALL_MODULE_ENABLED */
|
|
||||||
/*#define HAL_I2S_MODULE_ENABLED */
|
|
||||||
/*#define HAL_IWDG_MODULE_ENABLED */
|
|
||||||
/*#define HAL_LCD_MODULE_ENABLED */
|
|
||||||
/*#define HAL_LPTIM_MODULE_ENABLED */
|
|
||||||
/*#define HAL_RNG_MODULE_ENABLED */
|
|
||||||
/*#define HAL_RTC_MODULE_ENABLED */
|
|
||||||
/*#define HAL_SPI_MODULE_ENABLED */
|
|
||||||
/*#define HAL_TIM_MODULE_ENABLED */
|
|
||||||
/*#define HAL_TSC_MODULE_ENABLED */
|
|
||||||
/*#define HAL_UART_MODULE_ENABLED */
|
|
||||||
/*#define HAL_USART_MODULE_ENABLED */
|
|
||||||
/*#define HAL_IRDA_MODULE_ENABLED */
|
|
||||||
/*#define HAL_SMARTCARD_MODULE_ENABLED */
|
|
||||||
/*#define HAL_SMBUS_MODULE_ENABLED */
|
|
||||||
/*#define HAL_WWDG_MODULE_ENABLED */
|
|
||||||
/*#define HAL_PCD_MODULE_ENABLED */
|
|
||||||
#define HAL_GPIO_MODULE_ENABLED
|
|
||||||
#define HAL_EXTI_MODULE_ENABLED
|
|
||||||
#define HAL_DMA_MODULE_ENABLED
|
|
||||||
#define HAL_I2C_MODULE_ENABLED
|
|
||||||
#define HAL_RCC_MODULE_ENABLED
|
|
||||||
#define HAL_FLASH_MODULE_ENABLED
|
|
||||||
#define HAL_PWR_MODULE_ENABLED
|
|
||||||
#define HAL_CORTEX_MODULE_ENABLED
|
|
||||||
|
|
||||||
/* ########################## Oscillator Values adaptation ####################*/
|
|
||||||
/**
|
|
||||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
|
||||||
* This value is used by the RCC HAL module to compute the system frequency
|
|
||||||
* (when HSE is used as system clock source, directly or through the PLL).
|
|
||||||
*/
|
|
||||||
#if !defined (HSE_VALUE)
|
|
||||||
#define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
|
|
||||||
#endif /* HSE_VALUE */
|
|
||||||
|
|
||||||
#if !defined (HSE_STARTUP_TIMEOUT)
|
|
||||||
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
|
|
||||||
#endif /* HSE_STARTUP_TIMEOUT */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Internal Multiple Speed oscillator (MSI) default value.
|
|
||||||
* This value is the default MSI range value after Reset.
|
|
||||||
*/
|
|
||||||
#if !defined (MSI_VALUE)
|
|
||||||
#define MSI_VALUE ((uint32_t)2097000U) /*!< Value of the Internal oscillator in Hz*/
|
|
||||||
#endif /* MSI_VALUE */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Internal High Speed oscillator (HSI) value.
|
|
||||||
* This value is used by the RCC HAL module to compute the system frequency
|
|
||||||
* (when HSI is used as system clock source, directly or through the PLL).
|
|
||||||
*/
|
|
||||||
#if !defined (HSI_VALUE)
|
|
||||||
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
|
|
||||||
#endif /* HSI_VALUE */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Internal High Speed oscillator for USB (HSI48) value.
|
|
||||||
*/
|
|
||||||
#if !defined (HSI48_VALUE)
|
|
||||||
#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz.
|
|
||||||
The real value may vary depending on the variations
|
|
||||||
in voltage and temperature. */
|
|
||||||
#endif /* HSI48_VALUE */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Internal Low Speed oscillator (LSI) value.
|
|
||||||
*/
|
|
||||||
#if !defined (LSI_VALUE)
|
|
||||||
#define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/
|
|
||||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
|
||||||
The real value may vary depending on the variations
|
|
||||||
in voltage and temperature.*/
|
|
||||||
/**
|
|
||||||
* @brief External Low Speed oscillator (LSE) value.
|
|
||||||
* This value is used by the UART, RTC HAL module to compute the system frequency
|
|
||||||
*/
|
|
||||||
#if !defined (LSE_VALUE)
|
|
||||||
#define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/
|
|
||||||
#endif /* LSE_VALUE */
|
|
||||||
|
|
||||||
#if !defined (LSE_STARTUP_TIMEOUT)
|
|
||||||
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
|
|
||||||
#endif /* LSE_STARTUP_TIMEOUT */
|
|
||||||
|
|
||||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
|
||||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
|
||||||
|
|
||||||
/* ########################### System Configuration ######################### */
|
|
||||||
/**
|
|
||||||
* @brief This is the HAL system configuration section
|
|
||||||
*/
|
|
||||||
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
|
|
||||||
#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
|
|
||||||
#define USE_RTOS 0U
|
|
||||||
#define PREFETCH_ENABLE 0U
|
|
||||||
#define PREREAD_ENABLE 1U
|
|
||||||
#define BUFFER_CACHE_DISABLE 0U
|
|
||||||
|
|
||||||
/* ########################## Assert Selection ############################## */
|
|
||||||
/**
|
|
||||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
|
||||||
* HAL drivers code
|
|
||||||
*/
|
|
||||||
/* #define USE_FULL_ASSERT 1U */
|
|
||||||
|
|
||||||
/* ################## Register callback feature configuration ############### */
|
|
||||||
/**
|
|
||||||
* @brief Set below the peripheral configuration to "1U" to add the support
|
|
||||||
* of HAL callback registration/deregistration feature for the HAL
|
|
||||||
* driver(s). This allows user application to provide specific callback
|
|
||||||
* functions thanks to HAL_PPP_RegisterCallback() rather than overwriting
|
|
||||||
* the default weak callback functions (see each stm32l0xx_hal_ppp.h file
|
|
||||||
* for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef
|
|
||||||
* for each PPP peripheral).
|
|
||||||
*/
|
|
||||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U
|
|
||||||
#define USE_HAL_COMP_REGISTER_CALLBACKS 0U
|
|
||||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U
|
|
||||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U
|
|
||||||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U
|
|
||||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U
|
|
||||||
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U
|
|
||||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U
|
|
||||||
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U
|
|
||||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U
|
|
||||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U
|
|
||||||
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U
|
|
||||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U
|
|
||||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U
|
|
||||||
#define USE_HAL_TSC_REGISTER_CALLBACKS 0U
|
|
||||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U
|
|
||||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U
|
|
||||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
/**
|
|
||||||
* @brief Include module's header file
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef HAL_RCC_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_rcc.h"
|
|
||||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_exti.h"
|
|
||||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_gpio.h"
|
|
||||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_DMA_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_dma.h"
|
|
||||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_cortex.h"
|
|
||||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_ADC_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_adc.h"
|
|
||||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_COMP_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_comp.h"
|
|
||||||
#endif /* HAL_COMP_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_CRC_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_crc.h"
|
|
||||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_cryp.h"
|
|
||||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_DAC_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_dac.h"
|
|
||||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_FIREWALL_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_firewall.h"
|
|
||||||
#endif /* HAL_FIREWALL_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_flash.h"
|
|
||||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_I2C_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_i2c.h"
|
|
||||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_I2S_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_i2s.h"
|
|
||||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_iwdg.h"
|
|
||||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_LCD_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_lcd.h"
|
|
||||||
#endif /* HAL_LCD_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_lptim.h"
|
|
||||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_PWR_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_pwr.h"
|
|
||||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_RNG_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_rng.h"
|
|
||||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_RTC_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_rtc.h"
|
|
||||||
|
|
||||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_SPI_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_spi.h"
|
|
||||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_TIM_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_tim.h"
|
|
||||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_TSC_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_tsc.h"
|
|
||||||
#endif /* HAL_TSC_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_UART_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_uart.h"
|
|
||||||
#endif /* HAL_UART_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_USART_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_usart.h"
|
|
||||||
#endif /* HAL_USART_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_irda.h"
|
|
||||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_smartcard.h"
|
|
||||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_SMBUS_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_smbus.h"
|
|
||||||
#endif /* HAL_SMBUS_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_wwdg.h"
|
|
||||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
|
||||||
|
|
||||||
#ifdef HAL_PCD_MODULE_ENABLED
|
|
||||||
#include "stm32l0xx_hal_pcd.h"
|
|
||||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
|
||||||
|
|
||||||
/* Exported macro ------------------------------------------------------------*/
|
|
||||||
#ifdef USE_FULL_ASSERT
|
|
||||||
/**
|
|
||||||
* @brief The assert_param macro is used for function's parameters check.
|
|
||||||
* @param expr: If expr is false, it calls assert_failed function
|
|
||||||
* which reports the name of the source file and the source
|
|
||||||
* line number of the call that failed.
|
|
||||||
* If expr is true, it returns no value.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
|
||||||
/* Exported functions ------------------------------------------------------- */
|
|
||||||
void assert_failed(uint8_t* file, uint32_t line);
|
|
||||||
#else
|
|
||||||
#define assert_param(expr) ((void)0U)
|
|
||||||
#endif /* USE_FULL_ASSERT */
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif /* __STM32L0xx_HAL_CONF_H */
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
@ -73,7 +73,11 @@ int main(void)
|
|||||||
/* MCU Configuration--------------------------------------------------------*/
|
/* MCU Configuration--------------------------------------------------------*/
|
||||||
|
|
||||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||||
HAL_Init();
|
|
||||||
|
LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SYSCFG);
|
||||||
|
LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_PWR);
|
||||||
|
|
||||||
|
/* System interrupt init*/
|
||||||
|
|
||||||
/* USER CODE BEGIN Init */
|
/* USER CODE BEGIN Init */
|
||||||
|
|
||||||
@ -101,7 +105,6 @@ int main(void)
|
|||||||
while (1)
|
while (1)
|
||||||
{
|
{
|
||||||
/* USER CODE END WHILE */
|
/* USER CODE END WHILE */
|
||||||
|
|
||||||
/* USER CODE BEGIN 3 */
|
/* USER CODE BEGIN 3 */
|
||||||
}
|
}
|
||||||
/* USER CODE END 3 */
|
/* USER CODE END 3 */
|
||||||
@ -113,45 +116,36 @@ int main(void)
|
|||||||
*/
|
*/
|
||||||
void SystemClock_Config(void)
|
void SystemClock_Config(void)
|
||||||
{
|
{
|
||||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
LL_FLASH_SetLatency(LL_FLASH_LATENCY_0);
|
||||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
while(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_0)
|
||||||
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
|
{
|
||||||
|
}
|
||||||
|
LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
|
||||||
|
LL_RCC_MSI_Enable();
|
||||||
|
|
||||||
/** Configure the main internal regulator output voltage
|
/* Wait till MSI is ready */
|
||||||
*/
|
while(LL_RCC_MSI_IsReady() != 1)
|
||||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
|
||||||
/** Initializes the RCC Oscillators according to the specified parameters
|
|
||||||
* in the RCC_OscInitTypeDef structure.
|
|
||||||
*/
|
|
||||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
|
|
||||||
RCC_OscInitStruct.MSIState = RCC_MSI_ON;
|
|
||||||
RCC_OscInitStruct.MSICalibrationValue = 0;
|
|
||||||
RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_5;
|
|
||||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
|
||||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
|
||||||
{
|
{
|
||||||
Error_Handler();
|
|
||||||
}
|
|
||||||
/** Initializes the CPU, AHB and APB buses clocks
|
|
||||||
*/
|
|
||||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
|
||||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
|
||||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
|
|
||||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
|
||||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
|
||||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
|
||||||
|
|
||||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
|
|
||||||
{
|
|
||||||
Error_Handler();
|
|
||||||
}
|
}
|
||||||
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPUART1|RCC_PERIPHCLK_I2C1;
|
LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_5);
|
||||||
PeriphClkInit.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_PCLK1;
|
LL_RCC_MSI_SetCalibTrimming(0);
|
||||||
PeriphClkInit.I2c1ClockSelection = RCC_I2C1CLKSOURCE_PCLK1;
|
LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
|
||||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
|
LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
|
||||||
|
LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
|
||||||
|
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_MSI);
|
||||||
|
|
||||||
|
/* Wait till System clock is ready */
|
||||||
|
while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_MSI)
|
||||||
{
|
{
|
||||||
Error_Handler();
|
|
||||||
}
|
}
|
||||||
|
|
||||||
|
LL_Init1msTick(2097000);
|
||||||
|
|
||||||
|
LL_SetSystemCoreClock(2097000);
|
||||||
|
LL_RCC_SetLPUARTClockSource(LL_RCC_LPUART1_CLKSOURCE_PCLK1);
|
||||||
|
LL_RCC_SetI2CClockSource(LL_RCC_I2C1_CLKSOURCE_PCLK1);
|
||||||
}
|
}
|
||||||
|
|
||||||
/**
|
/**
|
||||||
|
|||||||
@ -1,84 +0,0 @@
|
|||||||
/* USER CODE BEGIN Header */
|
|
||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_msp.c
|
|
||||||
* @brief This file provides code for the MSP Initialization
|
|
||||||
* and de-Initialization codes.
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright (c) 2021 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
/* USER CODE END Header */
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "main.h"
|
|
||||||
/* USER CODE BEGIN Includes */
|
|
||||||
|
|
||||||
/* USER CODE END Includes */
|
|
||||||
|
|
||||||
/* Private typedef -----------------------------------------------------------*/
|
|
||||||
/* USER CODE BEGIN TD */
|
|
||||||
|
|
||||||
/* USER CODE END TD */
|
|
||||||
|
|
||||||
/* Private define ------------------------------------------------------------*/
|
|
||||||
/* USER CODE BEGIN Define */
|
|
||||||
|
|
||||||
/* USER CODE END Define */
|
|
||||||
|
|
||||||
/* Private macro -------------------------------------------------------------*/
|
|
||||||
/* USER CODE BEGIN Macro */
|
|
||||||
|
|
||||||
/* USER CODE END Macro */
|
|
||||||
|
|
||||||
/* Private variables ---------------------------------------------------------*/
|
|
||||||
/* USER CODE BEGIN PV */
|
|
||||||
|
|
||||||
/* USER CODE END PV */
|
|
||||||
|
|
||||||
/* Private function prototypes -----------------------------------------------*/
|
|
||||||
/* USER CODE BEGIN PFP */
|
|
||||||
|
|
||||||
/* USER CODE END PFP */
|
|
||||||
|
|
||||||
/* External functions --------------------------------------------------------*/
|
|
||||||
/* USER CODE BEGIN ExternalFunctions */
|
|
||||||
|
|
||||||
/* USER CODE END ExternalFunctions */
|
|
||||||
|
|
||||||
/* USER CODE BEGIN 0 */
|
|
||||||
|
|
||||||
/* USER CODE END 0 */
|
|
||||||
/**
|
|
||||||
* Initializes the Global MSP.
|
|
||||||
*/
|
|
||||||
void HAL_MspInit(void)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN MspInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END MspInit 0 */
|
|
||||||
|
|
||||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
|
||||||
__HAL_RCC_PWR_CLK_ENABLE();
|
|
||||||
|
|
||||||
/* System interrupt init*/
|
|
||||||
|
|
||||||
/* USER CODE BEGIN MspInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END MspInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
/* USER CODE BEGIN 1 */
|
|
||||||
|
|
||||||
/* USER CODE END 1 */
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
@ -128,7 +128,7 @@ void SysTick_Handler(void)
|
|||||||
/* USER CODE BEGIN SysTick_IRQn 0 */
|
/* USER CODE BEGIN SysTick_IRQn 0 */
|
||||||
|
|
||||||
/* USER CODE END SysTick_IRQn 0 */
|
/* USER CODE END SysTick_IRQn 0 */
|
||||||
HAL_IncTick();
|
|
||||||
/* USER CODE BEGIN SysTick_IRQn 1 */
|
/* USER CODE BEGIN SysTick_IRQn 1 */
|
||||||
/* USER CODE END SysTick_IRQn 1 */
|
/* USER CODE END SysTick_IRQn 1 */
|
||||||
}
|
}
|
||||||
|
|||||||
@ -1,8 +1,5 @@
|
|||||||
Core/Src/main.o: ../Core/Src/main.c ../Core/Inc/main.h \
|
Core/Src/main.o: ../Core/Src/main.c ../Core/Inc/main.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_dma.h \
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h \
|
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/stm32l0xx.h \
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/stm32l0xx.h \
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/stm32l011xx.h \
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/stm32l011xx.h \
|
||||||
../Drivers/CMSIS/Include/core_cm0plus.h \
|
../Drivers/CMSIS/Include/core_cm0plus.h \
|
||||||
@ -10,41 +7,21 @@ Core/Src/main.o: ../Core/Src/main.c ../Core/Inc/main.h \
|
|||||||
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
||||||
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h \
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_dma.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_i2c.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_i2c.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_lpuart.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_lpuart.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_rcc.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_rcc.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_system.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_crs.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_gpio.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_exti.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h \
|
||||||
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_system.h \
|
||||||
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_exti.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_cortex.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_cortex.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_utils.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_utils.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_pwr.h
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_pwr.h \
|
||||||
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_gpio.h
|
||||||
|
|
||||||
../Core/Inc/main.h:
|
../Core/Inc/main.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_dma.h:
|
||||||
|
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h:
|
|
||||||
|
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/stm32l0xx.h:
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/stm32l0xx.h:
|
||||||
|
|
||||||
@ -60,52 +37,24 @@ Core/Src/main.o: ../Core/Src/main.c ../Core/Inc/main.h \
|
|||||||
|
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_dma.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_i2c.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_i2c.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_lpuart.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_lpuart.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_rcc.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_rcc.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_system.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_crs.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_gpio.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_exti.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h:
|
||||||
|
|
||||||
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_system.h:
|
||||||
|
|
||||||
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_exti.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_cortex.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_cortex.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_utils.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_utils.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_pwr.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_pwr.h:
|
||||||
|
|
||||||
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_gpio.h:
|
||||||
|
|||||||
Binary file not shown.
@ -1,4 +1,5 @@
|
|||||||
|
stm32l0xx_ll_bus.h:440:22:LL_APB1_GRP1_EnableClock 8 static
|
||||||
stm32l0xx_ll_bus.h:987:22:LL_IOP_GRP1_EnableClock 8 static
|
stm32l0xx_ll_bus.h:987:22:LL_IOP_GRP1_EnableClock 8 static
|
||||||
main.c:129:6:SystemClock_Config 104 static,ignoring_inline_asm
|
main.c:117:6:SystemClock_Config 8 static
|
||||||
main.c:67:5:main 88 static
|
main.c:67:5:main 88 static
|
||||||
main.c:398:6:Error_Handler 0 static,ignoring_inline_asm
|
main.c:377:6:Error_Handler 0 static,ignoring_inline_asm
|
||||||
|
|||||||
Binary file not shown.
@ -1,8 +1,5 @@
|
|||||||
Core/Src/stm32l0xx_it.o: ../Core/Src/stm32l0xx_it.c ../Core/Inc/main.h \
|
Core/Src/stm32l0xx_it.o: ../Core/Src/stm32l0xx_it.c ../Core/Inc/main.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_dma.h \
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h \
|
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/stm32l0xx.h \
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/stm32l0xx.h \
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/stm32l011xx.h \
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/stm32l011xx.h \
|
||||||
../Drivers/CMSIS/Include/core_cm0plus.h \
|
../Drivers/CMSIS/Include/core_cm0plus.h \
|
||||||
@ -10,42 +7,22 @@ Core/Src/stm32l0xx_it.o: ../Core/Src/stm32l0xx_it.c ../Core/Inc/main.h \
|
|||||||
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
||||||
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h \
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_dma.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_i2c.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_i2c.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_lpuart.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_lpuart.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_rcc.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_rcc.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_system.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_crs.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_gpio.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_exti.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h \
|
||||||
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_system.h \
|
||||||
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_exti.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_cortex.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_cortex.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_utils.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_utils.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_pwr.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_pwr.h \
|
||||||
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_gpio.h \
|
||||||
../Core/Inc/stm32l0xx_it.h
|
../Core/Inc/stm32l0xx_it.h
|
||||||
|
|
||||||
../Core/Inc/main.h:
|
../Core/Inc/main.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_dma.h:
|
||||||
|
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h:
|
|
||||||
|
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/stm32l0xx.h:
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/stm32l0xx.h:
|
||||||
|
|
||||||
@ -61,54 +38,26 @@ Core/Src/stm32l0xx_it.o: ../Core/Src/stm32l0xx_it.c ../Core/Inc/main.h \
|
|||||||
|
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_dma.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_i2c.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_i2c.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_lpuart.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_lpuart.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_rcc.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_rcc.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_system.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_crs.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_gpio.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_exti.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h:
|
||||||
|
|
||||||
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_system.h:
|
||||||
|
|
||||||
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_exti.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_cortex.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_cortex.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_utils.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_utils.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_pwr.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_pwr.h:
|
||||||
|
|
||||||
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_gpio.h:
|
||||||
|
|
||||||
../Core/Inc/stm32l0xx_it.h:
|
../Core/Inc/stm32l0xx_it.h:
|
||||||
|
|||||||
Binary file not shown.
@ -2,5 +2,5 @@ stm32l0xx_it.c:70:6:NMI_Handler 0 static
|
|||||||
stm32l0xx_it.c:85:6:HardFault_Handler 0 static
|
stm32l0xx_it.c:85:6:HardFault_Handler 0 static
|
||||||
stm32l0xx_it.c:100:6:SVC_Handler 0 static
|
stm32l0xx_it.c:100:6:SVC_Handler 0 static
|
||||||
stm32l0xx_it.c:113:6:PendSV_Handler 0 static
|
stm32l0xx_it.c:113:6:PendSV_Handler 0 static
|
||||||
stm32l0xx_it.c:126:6:SysTick_Handler 8 static
|
stm32l0xx_it.c:126:6:SysTick_Handler 0 static
|
||||||
stm32l0xx_it.c:146:6:DMA1_Channel2_3_IRQHandler 0 static
|
stm32l0xx_it.c:146:6:DMA1_Channel2_3_IRQHandler 0 static
|
||||||
|
|||||||
@ -6,7 +6,6 @@
|
|||||||
# Add inputs and outputs from these tool invocations to the build variables
|
# Add inputs and outputs from these tool invocations to the build variables
|
||||||
C_SRCS += \
|
C_SRCS += \
|
||||||
../Core/Src/main.c \
|
../Core/Src/main.c \
|
||||||
../Core/Src/stm32l0xx_hal_msp.c \
|
|
||||||
../Core/Src/stm32l0xx_it.c \
|
../Core/Src/stm32l0xx_it.c \
|
||||||
../Core/Src/syscalls.c \
|
../Core/Src/syscalls.c \
|
||||||
../Core/Src/sysmem.c \
|
../Core/Src/sysmem.c \
|
||||||
@ -14,7 +13,6 @@ C_SRCS += \
|
|||||||
|
|
||||||
OBJS += \
|
OBJS += \
|
||||||
./Core/Src/main.o \
|
./Core/Src/main.o \
|
||||||
./Core/Src/stm32l0xx_hal_msp.o \
|
|
||||||
./Core/Src/stm32l0xx_it.o \
|
./Core/Src/stm32l0xx_it.o \
|
||||||
./Core/Src/syscalls.o \
|
./Core/Src/syscalls.o \
|
||||||
./Core/Src/sysmem.o \
|
./Core/Src/sysmem.o \
|
||||||
@ -22,7 +20,6 @@ OBJS += \
|
|||||||
|
|
||||||
C_DEPS += \
|
C_DEPS += \
|
||||||
./Core/Src/main.d \
|
./Core/Src/main.d \
|
||||||
./Core/Src/stm32l0xx_hal_msp.d \
|
|
||||||
./Core/Src/stm32l0xx_it.d \
|
./Core/Src/stm32l0xx_it.d \
|
||||||
./Core/Src/syscalls.d \
|
./Core/Src/syscalls.d \
|
||||||
./Core/Src/sysmem.d \
|
./Core/Src/sysmem.d \
|
||||||
@ -31,15 +28,13 @@ C_DEPS += \
|
|||||||
|
|
||||||
# Each subdirectory must supply rules for building sources it contributes
|
# Each subdirectory must supply rules for building sources it contributes
|
||||||
Core/Src/main.o: ../Core/Src/main.c Core/Src/subdir.mk
|
Core/Src/main.o: ../Core/Src/main.c Core/Src/subdir.mk
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/main.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER '-DHSE_VALUE=8000000' '-DHSE_STARTUP_TIMEOUT=100' '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DMSI_VALUE=2097000' '-DHSI_VALUE=16000000' '-DLSI_VALUE=37000' '-DVDD_VALUE=3300' '-DPREFETCH_ENABLE=0' '-DINSTRUCTION_CACHE_ENABLE=1' '-DDATA_CACHE_ENABLE=1' -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/main.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||||
Core/Src/stm32l0xx_hal_msp.o: ../Core/Src/stm32l0xx_hal_msp.c Core/Src/subdir.mk
|
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/stm32l0xx_hal_msp.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
|
||||||
Core/Src/stm32l0xx_it.o: ../Core/Src/stm32l0xx_it.c Core/Src/subdir.mk
|
Core/Src/stm32l0xx_it.o: ../Core/Src/stm32l0xx_it.c Core/Src/subdir.mk
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/stm32l0xx_it.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER '-DHSE_VALUE=8000000' '-DHSE_STARTUP_TIMEOUT=100' '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DMSI_VALUE=2097000' '-DHSI_VALUE=16000000' '-DLSI_VALUE=37000' '-DVDD_VALUE=3300' '-DPREFETCH_ENABLE=0' '-DINSTRUCTION_CACHE_ENABLE=1' '-DDATA_CACHE_ENABLE=1' -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/stm32l0xx_it.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||||
Core/Src/syscalls.o: ../Core/Src/syscalls.c Core/Src/subdir.mk
|
Core/Src/syscalls.o: ../Core/Src/syscalls.c Core/Src/subdir.mk
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/syscalls.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER '-DHSE_VALUE=8000000' '-DHSE_STARTUP_TIMEOUT=100' '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DMSI_VALUE=2097000' '-DHSI_VALUE=16000000' '-DLSI_VALUE=37000' '-DVDD_VALUE=3300' '-DPREFETCH_ENABLE=0' '-DINSTRUCTION_CACHE_ENABLE=1' '-DDATA_CACHE_ENABLE=1' -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/syscalls.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||||
Core/Src/sysmem.o: ../Core/Src/sysmem.c Core/Src/subdir.mk
|
Core/Src/sysmem.o: ../Core/Src/sysmem.c Core/Src/subdir.mk
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/sysmem.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER '-DHSE_VALUE=8000000' '-DHSE_STARTUP_TIMEOUT=100' '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DMSI_VALUE=2097000' '-DHSI_VALUE=16000000' '-DLSI_VALUE=37000' '-DVDD_VALUE=3300' '-DPREFETCH_ENABLE=0' '-DINSTRUCTION_CACHE_ENABLE=1' '-DDATA_CACHE_ENABLE=1' -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/sysmem.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||||
Core/Src/system_stm32l0xx.o: ../Core/Src/system_stm32l0xx.c Core/Src/subdir.mk
|
Core/Src/system_stm32l0xx.o: ../Core/Src/system_stm32l0xx.c Core/Src/subdir.mk
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/system_stm32l0xx.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER '-DHSE_VALUE=8000000' '-DHSE_STARTUP_TIMEOUT=100' '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DMSI_VALUE=2097000' '-DHSI_VALUE=16000000' '-DLSI_VALUE=37000' '-DVDD_VALUE=3300' '-DPREFETCH_ENABLE=0' '-DINSTRUCTION_CACHE_ENABLE=1' '-DDATA_CACHE_ENABLE=1' -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Core/Src/system_stm32l0xx.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||||
|
|
||||||
|
|||||||
Binary file not shown.
Binary file not shown.
@ -5,25 +5,7 @@ Core/Src/system_stm32l0xx.o: ../Core/Src/system_stm32l0xx.c \
|
|||||||
../Drivers/CMSIS/Include/cmsis_version.h \
|
../Drivers/CMSIS/Include/cmsis_version.h \
|
||||||
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
||||||
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h \
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h \
|
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h
|
|
||||||
|
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/stm32l0xx.h:
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/stm32l0xx.h:
|
||||||
|
|
||||||
@ -38,39 +20,3 @@ Core/Src/system_stm32l0xx.o: ../Core/Src/system_stm32l0xx.c \
|
|||||||
../Drivers/CMSIS/Include/cmsis_gcc.h:
|
../Drivers/CMSIS/Include/cmsis_gcc.h:
|
||||||
|
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h:
|
|
||||||
|
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h:
|
|
||||||
|
|||||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@ -8,24 +8,6 @@ Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_dma.o: \
|
|||||||
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
||||||
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h \
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h \
|
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_dma.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_dma.h:
|
||||||
@ -44,40 +26,4 @@ Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_dma.o: \
|
|||||||
|
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h:
|
|
||||||
|
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h:
|
||||||
|
|||||||
Binary file not shown.
@ -7,25 +7,7 @@ Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_exti.o: \
|
|||||||
../Drivers/CMSIS/Include/cmsis_version.h \
|
../Drivers/CMSIS/Include/cmsis_version.h \
|
||||||
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
||||||
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h \
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h \
|
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_exti.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_exti.h:
|
||||||
|
|
||||||
@ -42,39 +24,3 @@ Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_exti.o: \
|
|||||||
../Drivers/CMSIS/Include/cmsis_gcc.h:
|
../Drivers/CMSIS/Include/cmsis_gcc.h:
|
||||||
|
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h:
|
|
||||||
|
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h:
|
|
||||||
|
|||||||
Binary file not shown.
@ -8,24 +8,6 @@ Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_gpio.o: \
|
|||||||
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
||||||
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h \
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h \
|
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_gpio.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_gpio.h:
|
||||||
@ -44,40 +26,4 @@ Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_gpio.o: \
|
|||||||
|
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h:
|
|
||||||
|
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h:
|
||||||
|
|||||||
Binary file not shown.
@ -8,24 +8,6 @@ Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_i2c.o: \
|
|||||||
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
||||||
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h \
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h \
|
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_i2c.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_i2c.h:
|
||||||
@ -44,40 +26,4 @@ Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_i2c.o: \
|
|||||||
|
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h:
|
|
||||||
|
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h:
|
||||||
|
|||||||
Binary file not shown.
@ -8,24 +8,6 @@ Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_lpuart.o: \
|
|||||||
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
||||||
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h \
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h \
|
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_rcc.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_rcc.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h
|
||||||
|
|
||||||
@ -45,42 +27,6 @@ Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_lpuart.o: \
|
|||||||
|
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h:
|
|
||||||
|
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_rcc.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_rcc.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h:
|
||||||
|
|||||||
Binary file not shown.
BIN
fw/Debug/Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_pwr.o
Normal file
BIN
fw/Debug/Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_pwr.o
Normal file
Binary file not shown.
@ -1,3 +1 @@
|
|||||||
stm32l0xx_ll_bus.h:595:22:LL_APB1_GRP1_ForceReset 16 static
|
stm32l0xx_ll_pwr.c:56:13:LL_PWR_DeInit 0 static
|
||||||
stm32l0xx_ll_bus.h:646:22:LL_APB1_GRP1_ReleaseReset 16 static
|
|
||||||
stm32l0xx_ll_pwr.c:56:13:LL_PWR_DeInit 8 static
|
|
||||||
|
|||||||
@ -7,25 +7,7 @@ Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_rcc.o: \
|
|||||||
../Drivers/CMSIS/Include/cmsis_version.h \
|
../Drivers/CMSIS/Include/cmsis_version.h \
|
||||||
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
||||||
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h \
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h \
|
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_rcc.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_rcc.h:
|
||||||
|
|
||||||
@ -42,39 +24,3 @@ Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_rcc.o: \
|
|||||||
../Drivers/CMSIS/Include/cmsis_gcc.h:
|
../Drivers/CMSIS/Include/cmsis_gcc.h:
|
||||||
|
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h:
|
|
||||||
|
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h:
|
|
||||||
|
|||||||
Binary file not shown.
@ -8,24 +8,6 @@ Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_utils.o: \
|
|||||||
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
../Drivers/CMSIS/Include/cmsis_compiler.h \
|
||||||
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
../Drivers/CMSIS/Include/cmsis_gcc.h \
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h \
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h \
|
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_utils.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_utils.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_system.h \
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_system.h \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_pwr.h
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_pwr.h
|
||||||
@ -46,42 +28,6 @@ Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_utils.o: \
|
|||||||
|
|
||||||
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
../Drivers/CMSIS/Device/ST/STM32L0xx/Include/system_stm32l0xx.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal.h:
|
|
||||||
|
|
||||||
../Core/Inc/stm32l0xx_hal_conf.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_def.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_rcc_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_exti.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_gpio_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_dma.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_cortex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_flash_ramfunc.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_i2c_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_hal_pwr_ex.h:
|
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_utils.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_utils.h:
|
||||||
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_system.h:
|
../Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_system.h:
|
||||||
|
|||||||
Binary file not shown.
@ -5,126 +5,51 @@
|
|||||||
|
|
||||||
# Add inputs and outputs from these tool invocations to the build variables
|
# Add inputs and outputs from these tool invocations to the build variables
|
||||||
C_SRCS += \
|
C_SRCS += \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal.c \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_cortex.c \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_dma.c \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_exti.c \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash.c \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ex.c \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ramfunc.c \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_gpio.c \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_i2c.c \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_i2c_ex.c \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_pwr.c \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_pwr_ex.c \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_rcc.c \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_rcc_ex.c \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_tim.c \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_tim_ex.c \
|
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_dma.c \
|
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_dma.c \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_exti.c \
|
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_exti.c \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_gpio.c \
|
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_gpio.c \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_i2c.c \
|
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_i2c.c \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_lpuart.c \
|
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_lpuart.c \
|
||||||
|
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_pwr.c \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_rcc.c \
|
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_rcc.c \
|
||||||
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_utils.c
|
../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_utils.c
|
||||||
|
|
||||||
OBJS += \
|
OBJS += \
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal.o \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_cortex.o \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_dma.o \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_exti.o \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash.o \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ex.o \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ramfunc.o \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_gpio.o \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_i2c.o \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_i2c_ex.o \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_pwr.o \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_pwr_ex.o \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_rcc.o \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_rcc_ex.o \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_tim.o \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_tim_ex.o \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_dma.o \
|
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_dma.o \
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_exti.o \
|
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_exti.o \
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_gpio.o \
|
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_gpio.o \
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_i2c.o \
|
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_i2c.o \
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_lpuart.o \
|
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_lpuart.o \
|
||||||
|
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_pwr.o \
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_rcc.o \
|
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_rcc.o \
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_utils.o
|
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_utils.o
|
||||||
|
|
||||||
C_DEPS += \
|
C_DEPS += \
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal.d \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_cortex.d \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_dma.d \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_exti.d \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash.d \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ex.d \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ramfunc.d \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_gpio.d \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_i2c.d \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_i2c_ex.d \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_pwr.d \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_pwr_ex.d \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_rcc.d \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_rcc_ex.d \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_tim.d \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_tim_ex.d \
|
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_dma.d \
|
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_dma.d \
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_exti.d \
|
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_exti.d \
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_gpio.d \
|
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_gpio.d \
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_i2c.d \
|
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_i2c.d \
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_lpuart.d \
|
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_lpuart.d \
|
||||||
|
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_pwr.d \
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_rcc.d \
|
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_rcc.d \
|
||||||
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_utils.d
|
./Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_utils.d
|
||||||
|
|
||||||
|
|
||||||
# Each subdirectory must supply rules for building sources it contributes
|
# Each subdirectory must supply rules for building sources it contributes
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_cortex.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_cortex.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_cortex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_dma.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_dma.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_dma.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_exti.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_exti.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_exti.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ex.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ex.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ramfunc.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ramfunc.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ramfunc.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_gpio.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_gpio.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_gpio.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_i2c.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_i2c.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_i2c.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_i2c_ex.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_i2c_ex.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_i2c_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_pwr.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_pwr.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_pwr.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_pwr_ex.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_pwr_ex.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_pwr_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_rcc.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_rcc.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_rcc.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_rcc_ex.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_rcc_ex.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_rcc_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_tim.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_tim.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_tim.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_tim_ex.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_tim_ex.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_tim_ex.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_dma.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_dma.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_dma.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_dma.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_dma.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER '-DHSE_VALUE=8000000' '-DHSE_STARTUP_TIMEOUT=100' '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DMSI_VALUE=2097000' '-DHSI_VALUE=16000000' '-DLSI_VALUE=37000' '-DVDD_VALUE=3300' '-DPREFETCH_ENABLE=0' '-DINSTRUCTION_CACHE_ENABLE=1' '-DDATA_CACHE_ENABLE=1' -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_dma.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_exti.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_exti.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_exti.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_exti.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_exti.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER '-DHSE_VALUE=8000000' '-DHSE_STARTUP_TIMEOUT=100' '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DMSI_VALUE=2097000' '-DHSI_VALUE=16000000' '-DLSI_VALUE=37000' '-DVDD_VALUE=3300' '-DPREFETCH_ENABLE=0' '-DINSTRUCTION_CACHE_ENABLE=1' '-DDATA_CACHE_ENABLE=1' -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_exti.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_gpio.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_gpio.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_gpio.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_gpio.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_gpio.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER '-DHSE_VALUE=8000000' '-DHSE_STARTUP_TIMEOUT=100' '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DMSI_VALUE=2097000' '-DHSI_VALUE=16000000' '-DLSI_VALUE=37000' '-DVDD_VALUE=3300' '-DPREFETCH_ENABLE=0' '-DINSTRUCTION_CACHE_ENABLE=1' '-DDATA_CACHE_ENABLE=1' -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_gpio.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_i2c.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_i2c.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_i2c.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_i2c.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_i2c.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER '-DHSE_VALUE=8000000' '-DHSE_STARTUP_TIMEOUT=100' '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DMSI_VALUE=2097000' '-DHSI_VALUE=16000000' '-DLSI_VALUE=37000' '-DVDD_VALUE=3300' '-DPREFETCH_ENABLE=0' '-DINSTRUCTION_CACHE_ENABLE=1' '-DDATA_CACHE_ENABLE=1' -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_i2c.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_lpuart.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_lpuart.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_lpuart.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_lpuart.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_lpuart.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER '-DHSE_VALUE=8000000' '-DHSE_STARTUP_TIMEOUT=100' '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DMSI_VALUE=2097000' '-DHSI_VALUE=16000000' '-DLSI_VALUE=37000' '-DVDD_VALUE=3300' '-DPREFETCH_ENABLE=0' '-DINSTRUCTION_CACHE_ENABLE=1' '-DDATA_CACHE_ENABLE=1' -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_lpuart.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||||
|
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_pwr.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_pwr.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
||||||
|
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER '-DHSE_VALUE=8000000' '-DHSE_STARTUP_TIMEOUT=100' '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DMSI_VALUE=2097000' '-DHSI_VALUE=16000000' '-DLSI_VALUE=37000' '-DVDD_VALUE=3300' '-DPREFETCH_ENABLE=0' '-DINSTRUCTION_CACHE_ENABLE=1' '-DDATA_CACHE_ENABLE=1' -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_pwr.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_rcc.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_rcc.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_rcc.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_rcc.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_rcc.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER '-DHSE_VALUE=8000000' '-DHSE_STARTUP_TIMEOUT=100' '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DMSI_VALUE=2097000' '-DHSI_VALUE=16000000' '-DLSI_VALUE=37000' '-DVDD_VALUE=3300' '-DPREFETCH_ENABLE=0' '-DINSTRUCTION_CACHE_ENABLE=1' '-DDATA_CACHE_ENABLE=1' -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_rcc.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||||
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_utils.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_utils.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_utils.o: ../Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_utils.c Drivers/STM32L0xx_HAL_Driver/Src/subdir.mk
|
||||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -I../Drivers/STM32L0xx_HAL_Driver/Inc/Legacy -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_utils.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
arm-none-eabi-gcc "$<" -mcpu=cortex-m0plus -std=gnu11 -g3 -DSTM32L011xx -DDEBUG -DUSE_FULL_LL_DRIVER '-DHSE_VALUE=8000000' '-DHSE_STARTUP_TIMEOUT=100' '-DLSE_STARTUP_TIMEOUT=5000' '-DLSE_VALUE=32768' '-DMSI_VALUE=2097000' '-DHSI_VALUE=16000000' '-DLSI_VALUE=37000' '-DVDD_VALUE=3300' '-DPREFETCH_ENABLE=0' '-DINSTRUCTION_CACHE_ENABLE=1' '-DDATA_CACHE_ENABLE=1' -c -I../Core/Inc -I../Drivers/STM32L0xx_HAL_Driver/Inc -I../Drivers/CMSIS/Device/ST/STM32L0xx/Include -I../Drivers/CMSIS/Include -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -MMD -MP -MF"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_utils.d" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||||
|
|
||||||
|
|||||||
Binary file not shown.
Binary file not shown.
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@ -1,30 +1,14 @@
|
|||||||
"Core/Src/main.o"
|
"Core/Src/main.o"
|
||||||
"Core/Src/stm32l0xx_hal_msp.o"
|
|
||||||
"Core/Src/stm32l0xx_it.o"
|
"Core/Src/stm32l0xx_it.o"
|
||||||
"Core/Src/syscalls.o"
|
"Core/Src/syscalls.o"
|
||||||
"Core/Src/sysmem.o"
|
"Core/Src/sysmem.o"
|
||||||
"Core/Src/system_stm32l0xx.o"
|
"Core/Src/system_stm32l0xx.o"
|
||||||
"Core/Startup/startup_stm32l011f4ux.o"
|
"Core/Startup/startup_stm32l011f4ux.o"
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal.o"
|
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_cortex.o"
|
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_dma.o"
|
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_exti.o"
|
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash.o"
|
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ex.o"
|
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_flash_ramfunc.o"
|
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_gpio.o"
|
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_i2c.o"
|
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_i2c_ex.o"
|
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_pwr.o"
|
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_pwr_ex.o"
|
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_rcc.o"
|
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_rcc_ex.o"
|
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_tim.o"
|
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_hal_tim_ex.o"
|
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_dma.o"
|
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_dma.o"
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_exti.o"
|
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_exti.o"
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_gpio.o"
|
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_gpio.o"
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_i2c.o"
|
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_i2c.o"
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_lpuart.o"
|
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_lpuart.o"
|
||||||
|
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_pwr.o"
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_rcc.o"
|
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_rcc.o"
|
||||||
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_utils.o"
|
"Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_utils.o"
|
||||||
|
|||||||
File diff suppressed because it is too large
Load Diff
@ -1,487 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal.h
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief This file contains all the functions prototypes for the HAL
|
|
||||||
* module driver.
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
||||||
#ifndef __STM32L0xx_HAL_H
|
|
||||||
#define __STM32L0xx_HAL_H
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
extern "C" {
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal_conf.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup HAL HAL
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported types ------------------------------------------------------------*/
|
|
||||||
/* Exported constants --------------------------------------------------------*/
|
|
||||||
|
|
||||||
/** @defgroup HAL_Exported_Constants HAL Exported Constants
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup HAL_TICK_FREQ Tick Frequency
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
typedef enum
|
|
||||||
{
|
|
||||||
HAL_TICK_FREQ_10HZ = 100U,
|
|
||||||
HAL_TICK_FREQ_100HZ = 10U,
|
|
||||||
HAL_TICK_FREQ_1KHZ = 1U,
|
|
||||||
HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ
|
|
||||||
} HAL_TickFreqTypeDef;
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup SYSCFG_BootMode Boot Mode
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define SYSCFG_BOOT_MAINFLASH (0x00000000U)
|
|
||||||
#define SYSCFG_BOOT_SYSTEMFLASH SYSCFG_CFGR1_BOOT_MODE_0
|
|
||||||
#define SYSCFG_BOOT_SRAM SYSCFG_CFGR1_BOOT_MODE
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup DBGMCU_Low_Power_Config DBGMCU Low Power Configuration
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define DBGMCU_SLEEP DBGMCU_CR_DBG_SLEEP
|
|
||||||
#define DBGMCU_STOP DBGMCU_CR_DBG_STOP
|
|
||||||
#define DBGMCU_STANDBY DBGMCU_CR_DBG_STANDBY
|
|
||||||
#define IS_DBGMCU_PERIPH(__PERIPH__) ((((__PERIPH__) & (~(DBGMCU_CR_DBG))) == 0x00U) && ((__PERIPH__) != 0x00U))
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#if defined (LCD_BASE) /* STM32L0x3xx only */
|
|
||||||
/** @defgroup SYSCFG_LCD_EXT_CAPA SYSCFG LCD External Capacitors
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define SYSCFG_LCD_EXT_CAPA SYSCFG_CFGR2_CAPA /*!< Connection of internal Vlcd rail to external capacitors */
|
|
||||||
#define SYSCFG_VLCD_PB2_EXT_CAPA_ON SYSCFG_CFGR2_CAPA_0 /*!< Connection on PB2 */
|
|
||||||
#define SYSCFG_VLCD_PB12_EXT_CAPA_ON SYSCFG_CFGR2_CAPA_1 /*!< Connection on PB12 */
|
|
||||||
#define SYSCFG_VLCD_PB0_EXT_CAPA_ON SYSCFG_CFGR2_CAPA_2 /*!< Connection on PB0 */
|
|
||||||
#if defined (SYSCFG_CFGR2_CAPA_3)
|
|
||||||
#define SYSCFG_VLCD_PE11_EXT_CAPA_ON SYSCFG_CFGR2_CAPA_3 /*!< Connection on PE11 */
|
|
||||||
#endif
|
|
||||||
#if defined (SYSCFG_CFGR2_CAPA_4)
|
|
||||||
#define SYSCFG_VLCD_PE12_EXT_CAPA_ON SYSCFG_CFGR2_CAPA_4 /*!< Connection on PE12 */
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/** @defgroup SYSCFG_VREFINT_OUT_SELECT SYSCFG VREFINT Out Selection
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define SYSCFG_VREFINT_OUT_NONE (0x00000000U) /* no pad connected */
|
|
||||||
#define SYSCFG_VREFINT_OUT_PB0 SYSCFG_CFGR3_VREF_OUT_0 /* Selects PBO as output for the Vrefint */
|
|
||||||
#define SYSCFG_VREFINT_OUT_PB1 SYSCFG_CFGR3_VREF_OUT_1 /* Selects PB1 as output for the Vrefint */
|
|
||||||
#define SYSCFG_VREFINT_OUT_PB0_PB1 SYSCFG_CFGR3_VREF_OUT /* Selects PBO and PB1 as output for the Vrefint */
|
|
||||||
|
|
||||||
#define IS_SYSCFG_VREFINT_OUT_SELECT(OUTPUT) (((OUTPUT) == SYSCFG_VREFINT_OUT_NONE) || \
|
|
||||||
((OUTPUT) == SYSCFG_VREFINT_OUT_PB0) || \
|
|
||||||
((OUTPUT) == SYSCFG_VREFINT_OUT_PB1) || \
|
|
||||||
((OUTPUT) == SYSCFG_VREFINT_OUT_PB0_PB1))
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup SYSCFG_flags_definition SYSCFG Flags Definition
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define SYSCFG_FLAG_VREFINT_READY SYSCFG_CFGR3_VREFINT_RDYF
|
|
||||||
|
|
||||||
#define IS_SYSCFG_FLAG(FLAG) ((FLAG) == SYSCFG_FLAG_VREFINT_READY))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup SYSCFG_FastModePlus_GPIO Fast Mode Plus on GPIO
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/** @brief Fast mode Plus driving capability on a specific GPIO
|
|
||||||
*/
|
|
||||||
#if defined (SYSCFG_CFGR2_I2C_PB6_FMP)
|
|
||||||
#define SYSCFG_FASTMODEPLUS_PB6 SYSCFG_CFGR2_I2C_PB6_FMP /* Enable Fast Mode Plus on PB6 */
|
|
||||||
#endif
|
|
||||||
#if defined (SYSCFG_CFGR2_I2C_PB7_FMP)
|
|
||||||
#define SYSCFG_FASTMODEPLUS_PB7 SYSCFG_CFGR2_I2C_PB7_FMP /* Enable Fast Mode Plus on PB7 */
|
|
||||||
#endif
|
|
||||||
#if defined (SYSCFG_CFGR2_I2C_PB8_FMP)
|
|
||||||
#define SYSCFG_FASTMODEPLUS_PB8 SYSCFG_CFGR2_I2C_PB8_FMP /* Enable Fast Mode Plus on PB8 */
|
|
||||||
#endif
|
|
||||||
#if defined (SYSCFG_CFGR2_I2C_PB9_FMP)
|
|
||||||
#define SYSCFG_FASTMODEPLUS_PB9 SYSCFG_CFGR2_I2C_PB9_FMP /* Enable Fast Mode Plus on PB9 */
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define IS_SYSCFG_FASTMODEPLUS(PIN) ((((PIN) & (SYSCFG_FASTMODEPLUS_PB6)) == SYSCFG_FASTMODEPLUS_PB6) || \
|
|
||||||
(((PIN) & (SYSCFG_FASTMODEPLUS_PB7)) == SYSCFG_FASTMODEPLUS_PB7) || \
|
|
||||||
(((PIN) & (SYSCFG_FASTMODEPLUS_PB8)) == SYSCFG_FASTMODEPLUS_PB8) || \
|
|
||||||
(((PIN) & (SYSCFG_FASTMODEPLUS_PB9)) == SYSCFG_FASTMODEPLUS_PB9) )
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported macros -----------------------------------------------------------*/
|
|
||||||
/** @defgroup HAL_Exported_Macros HAL Exported Macros
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @brief Freeze/Unfreeze Peripherals in Debug mode
|
|
||||||
*/
|
|
||||||
#if defined (DBGMCU_APB1_FZ_DBG_TIM2_STOP)
|
|
||||||
/**
|
|
||||||
* @brief TIM2 Peripherals Debug mode
|
|
||||||
*/
|
|
||||||
#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBGMCU->APB1FZ,DBGMCU_APB1_FZ_DBG_TIM2_STOP)
|
|
||||||
#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBGMCU->APB1FZ,DBGMCU_APB1_FZ_DBG_TIM2_STOP)
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if defined (DBGMCU_APB1_FZ_DBG_TIM3_STOP)
|
|
||||||
/**
|
|
||||||
* @brief TIM3 Peripherals Debug mode
|
|
||||||
*/
|
|
||||||
#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBGMCU->APB1FZ,DBGMCU_APB1_FZ_DBG_TIM3_STOP)
|
|
||||||
#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBGMCU->APB1FZ,DBGMCU_APB1_FZ_DBG_TIM3_STOP)
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if defined (DBGMCU_APB1_FZ_DBG_TIM6_STOP)
|
|
||||||
/**
|
|
||||||
* @brief TIM6 Peripherals Debug mode
|
|
||||||
*/
|
|
||||||
#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM6_STOP)
|
|
||||||
#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM6_STOP)
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if defined (DBGMCU_APB1_FZ_DBG_TIM7_STOP)
|
|
||||||
/**
|
|
||||||
* @brief TIM7 Peripherals Debug mode
|
|
||||||
*/
|
|
||||||
#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM7_STOP)
|
|
||||||
#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM7_STOP)
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if defined (DBGMCU_APB1_FZ_DBG_RTC_STOP)
|
|
||||||
/**
|
|
||||||
* @brief RTC Peripherals Debug mode
|
|
||||||
*/
|
|
||||||
#define __HAL_DBGMCU_FREEZE_RTC() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_RTC_STOP)
|
|
||||||
#define __HAL_DBGMCU_UNFREEZE_RTC() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_RTC_STOP)
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if defined (DBGMCU_APB1_FZ_DBG_WWDG_STOP)
|
|
||||||
/**
|
|
||||||
* @brief WWDG Peripherals Debug mode
|
|
||||||
*/
|
|
||||||
#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_WWDG_STOP)
|
|
||||||
#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_WWDG_STOP)
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if defined (DBGMCU_APB1_FZ_DBG_IWDG_STOP)
|
|
||||||
/**
|
|
||||||
* @brief IWDG Peripherals Debug mode
|
|
||||||
*/
|
|
||||||
#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_IWDG_STOP)
|
|
||||||
#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_IWDG_STOP)
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if defined (DBGMCU_APB1_FZ_DBG_I2C1_STOP)
|
|
||||||
/**
|
|
||||||
* @brief I2C1 Peripherals Debug mode
|
|
||||||
*/
|
|
||||||
#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C1_STOP)
|
|
||||||
#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT_DBGMCU() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C1_STOP)
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if defined (DBGMCU_APB1_FZ_DBG_I2C2_STOP)
|
|
||||||
/**
|
|
||||||
* @brief I2C2 Peripherals Debug mode
|
|
||||||
*/
|
|
||||||
#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT_DBGMCU() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C2_STOP)
|
|
||||||
#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT_DBGMCU() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C2_STOP)
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if defined (DBGMCU_APB1_FZ_DBG_I2C3_STOP)
|
|
||||||
/**
|
|
||||||
* @brief I2C3 Peripherals Debug mode
|
|
||||||
*/
|
|
||||||
#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C3_STOP)
|
|
||||||
#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C3_STOP)
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if defined (DBGMCU_APB1_FZ_DBG_LPTIMER_STOP)
|
|
||||||
/**
|
|
||||||
* @brief LPTIMER Peripherals Debug mode
|
|
||||||
*/
|
|
||||||
#define __HAL_DBGMCU_FREEZE_LPTIMER() SET_BIT(DBGMCU->APB1FZ ,DBGMCU_APB1_FZ_DBG_LPTIMER_STOP)
|
|
||||||
#define __HAL_DBGMCU_UNFREEZE_LPTIMER() CLEAR_BIT(DBGMCU->APB1FZ ,DBGMCU_APB1_FZ_DBG_LPTIMER_STOP)
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if defined (DBGMCU_APB2_FZ_DBG_TIM22_STOP)
|
|
||||||
/**
|
|
||||||
* @brief TIM22 Peripherals Debug mode
|
|
||||||
*/
|
|
||||||
#define __HAL_DBGMCU_FREEZE_TIM22() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM22_STOP)
|
|
||||||
#define __HAL_DBGMCU_UNFREEZE_TIM22() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM22_STOP)
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if defined (DBGMCU_APB2_FZ_DBG_TIM21_STOP)
|
|
||||||
/**
|
|
||||||
* @brief TIM21 Peripherals Debug mode
|
|
||||||
*/
|
|
||||||
#define __HAL_DBGMCU_FREEZE_TIM21() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM21_STOP)
|
|
||||||
#define __HAL_DBGMCU_UNFREEZE_TIM21() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM21_STOP)
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/** @brief Main Flash memory mapped at 0x00000000
|
|
||||||
*/
|
|
||||||
#define __HAL_SYSCFG_REMAPMEMORY_FLASH() CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE)
|
|
||||||
|
|
||||||
/** @brief System Flash memory mapped at 0x00000000
|
|
||||||
*/
|
|
||||||
#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, SYSCFG_CFGR1_MEM_MODE_0)
|
|
||||||
|
|
||||||
|
|
||||||
/** @brief Embedded SRAM mapped at 0x00000000
|
|
||||||
*/
|
|
||||||
#define __HAL_SYSCFG_REMAPMEMORY_SRAM() MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, SYSCFG_CFGR1_MEM_MODE_0 | SYSCFG_CFGR1_MEM_MODE_1)
|
|
||||||
|
|
||||||
/** @brief Configuration of the DBG Low Power mode.
|
|
||||||
* @param __DBGLPMODE__ bit field to indicate in wich Low Power mode DBG is still active.
|
|
||||||
* This parameter can be a value of
|
|
||||||
* - DBGMCU_SLEEP
|
|
||||||
* - DBGMCU_STOP
|
|
||||||
* - DBGMCU_STANDBY
|
|
||||||
*/
|
|
||||||
#define __HAL_SYSCFG_DBG_LP_CONFIG(__DBGLPMODE__) do {assert_param(IS_DBGMCU_PERIPH(__DBGLPMODE__)); \
|
|
||||||
MODIFY_REG(DBGMCU->CR, DBGMCU_CR_DBG, (__DBGLPMODE__)); \
|
|
||||||
} while (0)
|
|
||||||
|
|
||||||
#if defined (LCD_BASE) /* STM32L0x3xx only */
|
|
||||||
|
|
||||||
/** @brief Macro to configure the VLCD Decoupling capacitance connection.
|
|
||||||
*
|
|
||||||
* @param __SYSCFG_VLCD_CAPA__ specifies the decoupling of LCD capacitance for rails connection on GPIO.
|
|
||||||
* This parameter can be a combination of following values (when available):
|
|
||||||
* @arg SYSCFG_VLCD_PB2_EXT_CAPA_ON: Connection on PB2
|
|
||||||
* @arg SYSCFG_VLCD_PB12_EXT_CAPA_ON: Connection on PB12
|
|
||||||
* @arg SYSCFG_VLCD_PB0_EXT_CAPA_ON: Connection on PB0
|
|
||||||
* @arg SYSCFG_VLCD_PE11_EXT_CAPA_ON: Connection on PE11
|
|
||||||
* @arg SYSCFG_VLCD_PE12_EXT_CAPA_ON: Connection on PE12
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#define __HAL_SYSCFG_VLCD_CAPA_CONFIG(__SYSCFG_VLCD_CAPA__) \
|
|
||||||
MODIFY_REG(SYSCFG->CFGR2, SYSCFG_LCD_EXT_CAPA, (uint32_t)(__SYSCFG_VLCD_CAPA__))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Returns the decoupling of LCD capacitance configured by user.
|
|
||||||
* @retval The LCD capacitance connection as configured by user. The returned can be a combination of :
|
|
||||||
* SYSCFG_VLCD_PB2_EXT_CAPA_ON: Connection on PB2
|
|
||||||
* SYSCFG_VLCD_PB12_EXT_CAPA_ON: Connection on PB12
|
|
||||||
* SYSCFG_VLCD_PB0_EXT_CAPA_ON: Connection on PB0
|
|
||||||
* SYSCFG_VLCD_PE11_EXT_CAPA_ON: Connection on PE11
|
|
||||||
* SYSCFG_VLCD_PE12_EXT_CAPA_ON: Connection on PE12
|
|
||||||
*/
|
|
||||||
#define __HAL_SYSCFG_GET_VLCD_CAPA_CONFIG() READ_BIT(SYSCFG->CFGR2, SYSCFG_LCD_EXT_CAPA)
|
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Returns the boot mode as configured by user.
|
|
||||||
* @retval The boot mode as configured by user. The returned can be a value of :
|
|
||||||
* - SYSCFG_BOOT_MAINFLASH
|
|
||||||
* - SYSCFG_BOOT_SYSTEMFLASH
|
|
||||||
* - SYSCFG_BOOT_SRAM
|
|
||||||
*/
|
|
||||||
#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOT_MODE)
|
|
||||||
|
|
||||||
|
|
||||||
/** @brief Check whether the specified SYSCFG flag is set or not.
|
|
||||||
* @param __FLAG__ specifies the flag to check.
|
|
||||||
* The only parameter supported is SYSCFG_FLAG_VREFINT_READY
|
|
||||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
|
||||||
*/
|
|
||||||
#define __HAL_SYSCFG_GET_FLAG(__FLAG__) (((SYSCFG->CFGR3) & (__FLAG__)) == (__FLAG__))
|
|
||||||
|
|
||||||
/** @brief Fast mode Plus driving capability enable macro
|
|
||||||
* @param __FASTMODEPLUS__ This parameter can be a value of :
|
|
||||||
* @arg SYSCFG_FASTMODEPLUS_PB6
|
|
||||||
* @arg SYSCFG_FASTMODEPLUS_PB7
|
|
||||||
* @arg SYSCFG_FASTMODEPLUS_PB8
|
|
||||||
* @arg SYSCFG_FASTMODEPLUS_PB9
|
|
||||||
*/
|
|
||||||
#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__))); \
|
|
||||||
SET_BIT(SYSCFG->CFGR2, (__FASTMODEPLUS__)); \
|
|
||||||
}while(0)
|
|
||||||
/** @brief Fast mode Plus driving capability disable macro
|
|
||||||
* @param __FASTMODEPLUS__ This parameter can be a value of :
|
|
||||||
* @arg SYSCFG_FASTMODEPLUS_PB6
|
|
||||||
* @arg SYSCFG_FASTMODEPLUS_PB7
|
|
||||||
* @arg SYSCFG_FASTMODEPLUS_PB8
|
|
||||||
* @arg SYSCFG_FASTMODEPLUS_PB9
|
|
||||||
*/
|
|
||||||
#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__))); \
|
|
||||||
CLEAR_BIT(SYSCFG->CFGR2, (__FASTMODEPLUS__)); \
|
|
||||||
}while(0)
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup HAL_Private_Macros HAL Private Macros
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \
|
|
||||||
((FREQ) == HAL_TICK_FREQ_100HZ) || \
|
|
||||||
((FREQ) == HAL_TICK_FREQ_1KHZ))
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported variables --------------------------------------------------------*/
|
|
||||||
/** @defgroup HAL_Exported_Variables HAL Exported Variables
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
extern __IO uint32_t uwTick;
|
|
||||||
extern uint32_t uwTickPrio;
|
|
||||||
extern HAL_TickFreqTypeDef uwTickFreq;
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported functions --------------------------------------------------------*/
|
|
||||||
/** @defgroup HAL_Exported_Functions HAL Exported Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
||||||
* @brief Initialization and de-initialization functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_Init(void);
|
|
||||||
HAL_StatusTypeDef HAL_DeInit(void);
|
|
||||||
void HAL_MspInit(void);
|
|
||||||
void HAL_MspDeInit(void);
|
|
||||||
HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority);
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup HAL_Exported_Functions_Group2 Peripheral Control functions
|
|
||||||
* @brief Peripheral Control functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
void HAL_IncTick(void);
|
|
||||||
void HAL_Delay(uint32_t Delay);
|
|
||||||
uint32_t HAL_GetTick(void);
|
|
||||||
uint32_t HAL_GetTickPrio(void);
|
|
||||||
HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
|
|
||||||
HAL_TickFreqTypeDef HAL_GetTickFreq(void);
|
|
||||||
void HAL_SuspendTick(void);
|
|
||||||
void HAL_ResumeTick(void);
|
|
||||||
uint32_t HAL_GetHalVersion(void);
|
|
||||||
uint32_t HAL_GetREVID(void);
|
|
||||||
uint32_t HAL_GetDEVID(void);
|
|
||||||
uint32_t HAL_GetUIDw0(void);
|
|
||||||
uint32_t HAL_GetUIDw1(void);
|
|
||||||
uint32_t HAL_GetUIDw2(void);
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup HAL_Exported_Functions_Group3 DBGMCU Peripheral Control functions
|
|
||||||
* @brief DBGMCU Peripheral Control functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
void HAL_DBGMCU_EnableDBGSleepMode(void);
|
|
||||||
void HAL_DBGMCU_DisableDBGSleepMode(void);
|
|
||||||
void HAL_DBGMCU_EnableDBGStopMode(void);
|
|
||||||
void HAL_DBGMCU_DisableDBGStopMode(void);
|
|
||||||
void HAL_DBGMCU_EnableDBGStandbyMode(void);
|
|
||||||
void HAL_DBGMCU_DisableDBGStandbyMode(void);
|
|
||||||
void HAL_DBGMCU_DBG_EnableLowPowerConfig(uint32_t Periph);
|
|
||||||
void HAL_DBGMCU_DBG_DisableLowPowerConfig(uint32_t Periph);
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup HAL_Exported_Functions_Group4 SYSCFG Peripheral Control functions
|
|
||||||
* @brief SYSCFG Peripheral Control functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
uint32_t HAL_SYSCFG_GetBootMode(void);
|
|
||||||
void HAL_SYSCFG_Enable_Lock_VREFINT(void);
|
|
||||||
void HAL_SYSCFG_Disable_Lock_VREFINT(void);
|
|
||||||
void HAL_SYSCFG_VREFINT_OutputSelect(uint32_t SYSCFG_Vrefint_OUTPUT);
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Define the private group ***********************************/
|
|
||||||
/**************************************************************/
|
|
||||||
/** @defgroup HAL_Private HAL Private
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
/**************************************************************/
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif /* __STM32L0xx_HAL_H */
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
|
|
||||||
@ -1,365 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_cortex.h
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief Header file of CORTEX HAL module.
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright(c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
||||||
#ifndef __STM32L0xx_HAL_CORTEX_H
|
|
||||||
#define __STM32L0xx_HAL_CORTEX_H
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
extern "C" {
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal_def.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup CORTEX CORTEX
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/* Exported types ------------------------------------------------------------*/
|
|
||||||
|
|
||||||
/** @defgroup CORTEX_Exported_Types CORTEX Exported Types
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#if (__MPU_PRESENT == 1)
|
|
||||||
/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
typedef struct
|
|
||||||
{
|
|
||||||
uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */
|
|
||||||
|
|
||||||
uint8_t Enable; /*!< Specifies the status of the region.
|
|
||||||
This parameter can be a value of @ref CORTEX_MPU_Region_Enable */
|
|
||||||
uint8_t Number; /*!< Specifies the number of the region to protect.
|
|
||||||
This parameter can be a value of @ref CORTEX_MPU_Region_Number */
|
|
||||||
|
|
||||||
uint8_t Size; /*!< Specifies the size of the region to protect.
|
|
||||||
This parameter can be a value of @ref CORTEX_MPU_Region_Size */
|
|
||||||
uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable.
|
|
||||||
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
|
|
||||||
uint8_t TypeExtField; /*!< This parameter is NOT used but is kept to keep API unified through all families*/
|
|
||||||
|
|
||||||
uint8_t AccessPermission; /*!< Specifies the region access permission type.
|
|
||||||
This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */
|
|
||||||
uint8_t DisableExec; /*!< Specifies the instruction access status.
|
|
||||||
This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */
|
|
||||||
uint8_t IsShareable; /*!< Specifies the shareability status of the protected region.
|
|
||||||
This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */
|
|
||||||
uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected.
|
|
||||||
This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */
|
|
||||||
uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region.
|
|
||||||
This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */
|
|
||||||
}MPU_Region_InitTypeDef;
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
#endif /* __MPU_PRESENT */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
/* Exported constants --------------------------------------------------------*/
|
|
||||||
|
|
||||||
/** @defgroup CORTEX_Exported_Constants CORTEx Exported Constants
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
#define IS_NVIC_PREEMPTION_PRIORITY(__PRIORITY__) ((__PRIORITY__) < 0x10U)
|
|
||||||
|
|
||||||
#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x0)
|
|
||||||
|
|
||||||
/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick Clock Source
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define SYSTICK_CLKSOURCE_HCLK_DIV8 (0x00000000U)
|
|
||||||
#define SYSTICK_CLKSOURCE_HCLK (0x00000004U)
|
|
||||||
#define IS_SYSTICK_CLK_SOURCE(__SOURCE__) (((__SOURCE__) == SYSTICK_CLKSOURCE_HCLK) || \
|
|
||||||
((__SOURCE__) == SYSTICK_CLKSOURCE_HCLK_DIV8))
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#if (__MPU_PRESENT == 1)
|
|
||||||
/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control CORTEX MPU HFNMI and PRIVILEGED Access control
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define MPU_HFNMI_PRIVDEF_NONE (0x00000000U)
|
|
||||||
#define MPU_HARDFAULT_NMI (0x00000002U)
|
|
||||||
#define MPU_PRIVILEGED_DEFAULT (0x00000004U)
|
|
||||||
#define MPU_HFNMI_PRIVDEF (0x00000006U)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define MPU_REGION_ENABLE ((uint8_t)0x01)
|
|
||||||
#define MPU_REGION_DISABLE ((uint8_t)0x00)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00)
|
|
||||||
#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01)
|
|
||||||
#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01)
|
|
||||||
#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01)
|
|
||||||
#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define MPU_REGION_SIZE_32B ((uint8_t)0x04)
|
|
||||||
#define MPU_REGION_SIZE_64B ((uint8_t)0x05)
|
|
||||||
#define MPU_REGION_SIZE_128B ((uint8_t)0x06)
|
|
||||||
#define MPU_REGION_SIZE_256B ((uint8_t)0x07)
|
|
||||||
#define MPU_REGION_SIZE_512B ((uint8_t)0x08)
|
|
||||||
#define MPU_REGION_SIZE_1KB ((uint8_t)0x09)
|
|
||||||
#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A)
|
|
||||||
#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B)
|
|
||||||
#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C)
|
|
||||||
#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D)
|
|
||||||
#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E)
|
|
||||||
#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F)
|
|
||||||
#define MPU_REGION_SIZE_128KB ((uint8_t)0x10)
|
|
||||||
#define MPU_REGION_SIZE_256KB ((uint8_t)0x11)
|
|
||||||
#define MPU_REGION_SIZE_512KB ((uint8_t)0x12)
|
|
||||||
#define MPU_REGION_SIZE_1MB ((uint8_t)0x13)
|
|
||||||
#define MPU_REGION_SIZE_2MB ((uint8_t)0x14)
|
|
||||||
#define MPU_REGION_SIZE_4MB ((uint8_t)0x15)
|
|
||||||
#define MPU_REGION_SIZE_8MB ((uint8_t)0x16)
|
|
||||||
#define MPU_REGION_SIZE_16MB ((uint8_t)0x17)
|
|
||||||
#define MPU_REGION_SIZE_32MB ((uint8_t)0x18)
|
|
||||||
#define MPU_REGION_SIZE_64MB ((uint8_t)0x19)
|
|
||||||
#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A)
|
|
||||||
#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B)
|
|
||||||
#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C)
|
|
||||||
#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D)
|
|
||||||
#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E)
|
|
||||||
#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define MPU_REGION_NO_ACCESS ((uint8_t)0x00)
|
|
||||||
#define MPU_REGION_PRIV_RW ((uint8_t)0x01)
|
|
||||||
#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02)
|
|
||||||
#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03)
|
|
||||||
#define MPU_REGION_PRIV_RO ((uint8_t)0x05)
|
|
||||||
#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define MPU_REGION_NUMBER0 ((uint8_t)0x00)
|
|
||||||
#define MPU_REGION_NUMBER1 ((uint8_t)0x01)
|
|
||||||
#define MPU_REGION_NUMBER2 ((uint8_t)0x02)
|
|
||||||
#define MPU_REGION_NUMBER3 ((uint8_t)0x03)
|
|
||||||
#define MPU_REGION_NUMBER4 ((uint8_t)0x04)
|
|
||||||
#define MPU_REGION_NUMBER5 ((uint8_t)0x05)
|
|
||||||
#define MPU_REGION_NUMBER6 ((uint8_t)0x06)
|
|
||||||
#define MPU_REGION_NUMBER7 ((uint8_t)0x07)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
#endif /* __MPU_PRESENT */
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported functions --------------------------------------------------------*/
|
|
||||||
/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and Configuration functions
|
|
||||||
* @brief Initialization and Configuration functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
|
|
||||||
void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
|
|
||||||
void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
|
|
||||||
void HAL_NVIC_SystemReset(void);
|
|
||||||
uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
|
|
||||||
* @brief Cortex control functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn);
|
|
||||||
uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
|
|
||||||
void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
|
|
||||||
void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
|
|
||||||
void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
|
|
||||||
void HAL_SYSTICK_IRQHandler(void);
|
|
||||||
void HAL_SYSTICK_Callback(void);
|
|
||||||
#if (__MPU_PRESENT == 1U)
|
|
||||||
void HAL_MPU_Enable(uint32_t MPU_Control);
|
|
||||||
void HAL_MPU_Disable(void);
|
|
||||||
void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
|
|
||||||
#endif /* __MPU_PRESENT */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Private types -------------------------------------------------------------*/
|
|
||||||
/* Private variables ---------------------------------------------------------*/
|
|
||||||
/* Private constants ---------------------------------------------------------*/
|
|
||||||
/* Private macros ------------------------------------------------------------*/
|
|
||||||
/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#if (__MPU_PRESENT == 1)
|
|
||||||
#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
|
|
||||||
((STATE) == MPU_REGION_DISABLE))
|
|
||||||
|
|
||||||
#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
|
|
||||||
((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
|
|
||||||
|
|
||||||
#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \
|
|
||||||
((STATE) == MPU_ACCESS_NOT_SHAREABLE))
|
|
||||||
|
|
||||||
#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \
|
|
||||||
((STATE) == MPU_ACCESS_NOT_CACHEABLE))
|
|
||||||
|
|
||||||
#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \
|
|
||||||
((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
|
|
||||||
|
|
||||||
#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \
|
|
||||||
((TYPE) == MPU_REGION_PRIV_RW) || \
|
|
||||||
((TYPE) == MPU_REGION_PRIV_RW_URO) || \
|
|
||||||
((TYPE) == MPU_REGION_FULL_ACCESS) || \
|
|
||||||
((TYPE) == MPU_REGION_PRIV_RO) || \
|
|
||||||
((TYPE) == MPU_REGION_PRIV_RO_URO))
|
|
||||||
|
|
||||||
#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \
|
|
||||||
((NUMBER) == MPU_REGION_NUMBER1) || \
|
|
||||||
((NUMBER) == MPU_REGION_NUMBER2) || \
|
|
||||||
((NUMBER) == MPU_REGION_NUMBER3) || \
|
|
||||||
((NUMBER) == MPU_REGION_NUMBER4) || \
|
|
||||||
((NUMBER) == MPU_REGION_NUMBER5) || \
|
|
||||||
((NUMBER) == MPU_REGION_NUMBER6) || \
|
|
||||||
((NUMBER) == MPU_REGION_NUMBER7))
|
|
||||||
|
|
||||||
#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_256B) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_512B) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_1KB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_2KB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_4KB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_8KB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_16KB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_32KB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_64KB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_128KB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_256KB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_512KB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_1MB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_2MB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_4MB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_8MB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_16MB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_32MB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_64MB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_128MB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_256MB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_512MB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_1GB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_2GB) || \
|
|
||||||
((SIZE) == MPU_REGION_SIZE_4GB))
|
|
||||||
|
|
||||||
#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FFU)
|
|
||||||
#endif /* __MPU_PRESENT */
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif /* __STM32L0xx_HAL_CORTEX_H */
|
|
||||||
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
|
|
||||||
@ -1,204 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_def.h
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief This file contains HAL common defines, enumeration, macros and
|
|
||||||
* structures definitions.
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
||||||
#ifndef __STM32L0xx_HAL_DEF
|
|
||||||
#define __STM32L0xx_HAL_DEF
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
extern "C" {
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx.h"
|
|
||||||
#include "Legacy/stm32_hal_legacy.h"
|
|
||||||
#include <stddef.h>
|
|
||||||
|
|
||||||
/* Exported types ------------------------------------------------------------*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief HAL Status structures definition
|
|
||||||
*/
|
|
||||||
typedef enum
|
|
||||||
{
|
|
||||||
HAL_OK = 0x00U,
|
|
||||||
HAL_ERROR = 0x01U,
|
|
||||||
HAL_BUSY = 0x02U,
|
|
||||||
HAL_TIMEOUT = 0x03U
|
|
||||||
} HAL_StatusTypeDef;
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief HAL Lock structures definition
|
|
||||||
*/
|
|
||||||
typedef enum
|
|
||||||
{
|
|
||||||
HAL_UNLOCKED = 0x00U,
|
|
||||||
HAL_LOCKED = 0x01U
|
|
||||||
} HAL_LockTypeDef;
|
|
||||||
|
|
||||||
/* Exported macro ------------------------------------------------------------*/
|
|
||||||
|
|
||||||
#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */
|
|
||||||
|
|
||||||
#define HAL_MAX_DELAY 0xFFFFFFFFU
|
|
||||||
|
|
||||||
#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT))
|
|
||||||
#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U)
|
|
||||||
|
|
||||||
#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
|
|
||||||
do{ \
|
|
||||||
(__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
|
|
||||||
(__DMA_HANDLE__).Parent = (__HANDLE__); \
|
|
||||||
} while(0)
|
|
||||||
|
|
||||||
/** @brief Reset the Handle's State field.
|
|
||||||
* @param __HANDLE__: specifies the Peripheral Handle.
|
|
||||||
* @note This macro can be used for the following purpose:
|
|
||||||
* - When the Handle is declared as local variable; before passing it as parameter
|
|
||||||
* to HAL_PPP_Init() for the first time, it is mandatory to use this macro
|
|
||||||
* to set to 0 the Handle's "State" field.
|
|
||||||
* Otherwise, "State" field may have any random value and the first time the function
|
|
||||||
* HAL_PPP_Init() is called, the low level hardware initialization will be missed
|
|
||||||
* (i.e. HAL_PPP_MspInit() will not be executed).
|
|
||||||
* - When there is a need to reconfigure the low level hardware: instead of calling
|
|
||||||
* HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
|
|
||||||
* In this later function, when the Handle's "State" field is set to 0, it will execute the function
|
|
||||||
* HAL_PPP_MspInit() which will reconfigure the low level hardware.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
|
|
||||||
|
|
||||||
#if (USE_RTOS == 1)
|
|
||||||
|
|
||||||
/* Reserved for future use */
|
|
||||||
#error "USE_RTOS should be 0 in the current HAL release"
|
|
||||||
|
|
||||||
#else
|
|
||||||
#define __HAL_LOCK(__HANDLE__) \
|
|
||||||
do{ \
|
|
||||||
if((__HANDLE__)->Lock == HAL_LOCKED) \
|
|
||||||
{ \
|
|
||||||
return HAL_BUSY; \
|
|
||||||
} \
|
|
||||||
else \
|
|
||||||
{ \
|
|
||||||
(__HANDLE__)->Lock = HAL_LOCKED; \
|
|
||||||
} \
|
|
||||||
}while (0)
|
|
||||||
|
|
||||||
#define __HAL_UNLOCK(__HANDLE__) \
|
|
||||||
do{ \
|
|
||||||
(__HANDLE__)->Lock = HAL_UNLOCKED; \
|
|
||||||
}while (0)
|
|
||||||
#endif /* USE_RTOS */
|
|
||||||
|
|
||||||
#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
|
|
||||||
#ifndef __weak
|
|
||||||
#define __weak __attribute__((weak))
|
|
||||||
#endif
|
|
||||||
#ifndef __packed
|
|
||||||
#define __packed __attribute__((packed))
|
|
||||||
#endif
|
|
||||||
#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
|
|
||||||
#ifndef __weak
|
|
||||||
#define __weak __attribute__((weak))
|
|
||||||
#endif /* __weak */
|
|
||||||
#ifndef __packed
|
|
||||||
#define __packed __attribute__((__packed__))
|
|
||||||
#endif /* __packed */
|
|
||||||
|
|
||||||
#define __NOINLINE __attribute__ ( (noinline) )
|
|
||||||
|
|
||||||
#endif /* __GNUC__ */
|
|
||||||
|
|
||||||
|
|
||||||
/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
|
|
||||||
#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
|
|
||||||
#ifndef __ALIGN_BEGIN
|
|
||||||
#define __ALIGN_BEGIN
|
|
||||||
#endif
|
|
||||||
#ifndef __ALIGN_END
|
|
||||||
#define __ALIGN_END __attribute__ ((aligned (4)))
|
|
||||||
#endif
|
|
||||||
#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
|
|
||||||
#ifndef __ALIGN_END
|
|
||||||
#define __ALIGN_END __attribute__ ((aligned (4)))
|
|
||||||
#endif /* __ALIGN_END */
|
|
||||||
#ifndef __ALIGN_BEGIN
|
|
||||||
#define __ALIGN_BEGIN
|
|
||||||
#endif /* __ALIGN_BEGIN */
|
|
||||||
#else
|
|
||||||
#ifndef __ALIGN_END
|
|
||||||
#define __ALIGN_END
|
|
||||||
#endif /* __ALIGN_END */
|
|
||||||
#ifndef __ALIGN_BEGIN
|
|
||||||
#if defined (__CC_ARM) /* ARM Compiler V5*/
|
|
||||||
#define __ALIGN_BEGIN __align(4)
|
|
||||||
#elif defined (__ICCARM__) /* IAR Compiler */
|
|
||||||
#define __ALIGN_BEGIN
|
|
||||||
#endif /* __CC_ARM */
|
|
||||||
#endif /* __ALIGN_BEGIN */
|
|
||||||
#endif /* __GNUC__ */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief __RAM_FUNC definition
|
|
||||||
*/
|
|
||||||
#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050))
|
|
||||||
/* ARM Compiler V4/V5 and V6
|
|
||||||
--------------------------
|
|
||||||
RAM functions are defined using the toolchain options.
|
|
||||||
Functions that are executed in RAM should reside in a separate source module.
|
|
||||||
Using the 'Options for File' dialog you can simply change the 'Code / Const'
|
|
||||||
area of a module to a memory space in physical RAM.
|
|
||||||
Available memory areas are declared in the 'Target' tab of the 'Options for Target'
|
|
||||||
dialog.
|
|
||||||
*/
|
|
||||||
#define __RAM_FUNC
|
|
||||||
|
|
||||||
#define __NOINLINE __attribute__ ( (noinline) )
|
|
||||||
|
|
||||||
|
|
||||||
#elif defined ( __ICCARM__ )
|
|
||||||
/* ICCARM Compiler
|
|
||||||
---------------
|
|
||||||
RAM functions are defined using a specific toolchain keyword "__ramfunc".
|
|
||||||
*/
|
|
||||||
#define __RAM_FUNC __ramfunc
|
|
||||||
|
|
||||||
#define __NOINLINE _Pragma("optimize = no_inline")
|
|
||||||
|
|
||||||
#elif defined ( __GNUC__ )
|
|
||||||
/* GNU Compiler
|
|
||||||
------------
|
|
||||||
RAM functions are defined using a specific toolchain attribute
|
|
||||||
"__attribute__((section(".RamFunc")))".
|
|
||||||
*/
|
|
||||||
#define __RAM_FUNC __attribute__((section(".RamFunc")))
|
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif /* ___STM32L0xx_HAL_DEF */
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
|
|
||||||
@ -1,675 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_dma.h
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief Header file of DMA HAL module.
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
||||||
#ifndef STM32L0xx_HAL_DMA_H
|
|
||||||
#define STM32L0xx_HAL_DMA_H
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
extern "C" {
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal_def.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup DMA
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported types ------------------------------------------------------------*/
|
|
||||||
/** @defgroup DMA_Exported_Types DMA Exported Types
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief DMA Configuration Structure definition
|
|
||||||
*/
|
|
||||||
typedef struct
|
|
||||||
{
|
|
||||||
uint32_t Request; /*!< Specifies the request selected for the specified channel.
|
|
||||||
This parameter can be a value of @ref DMA_request */
|
|
||||||
|
|
||||||
uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
|
|
||||||
from memory to memory or from peripheral to memory.
|
|
||||||
This parameter can be a value of @ref DMA_Data_transfer_direction */
|
|
||||||
|
|
||||||
uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
|
|
||||||
This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
|
|
||||||
|
|
||||||
uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
|
|
||||||
This parameter can be a value of @ref DMA_Memory_incremented_mode */
|
|
||||||
|
|
||||||
uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
|
|
||||||
This parameter can be a value of @ref DMA_Peripheral_data_size */
|
|
||||||
|
|
||||||
uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
|
|
||||||
This parameter can be a value of @ref DMA_Memory_data_size */
|
|
||||||
|
|
||||||
uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx.
|
|
||||||
This parameter can be a value of @ref DMA_mode
|
|
||||||
@note The circular buffer mode cannot be used if the memory-to-memory
|
|
||||||
data transfer is configured on the selected Channel */
|
|
||||||
|
|
||||||
uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx.
|
|
||||||
This parameter can be a value of @ref DMA_Priority_level */
|
|
||||||
} DMA_InitTypeDef;
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief HAL DMA State structures definition
|
|
||||||
*/
|
|
||||||
typedef enum
|
|
||||||
{
|
|
||||||
HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */
|
|
||||||
HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */
|
|
||||||
HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */
|
|
||||||
HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */
|
|
||||||
}HAL_DMA_StateTypeDef;
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief HAL DMA Error Code structure definition
|
|
||||||
*/
|
|
||||||
typedef enum
|
|
||||||
{
|
|
||||||
HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */
|
|
||||||
HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */
|
|
||||||
}HAL_DMA_LevelCompleteTypeDef;
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief HAL DMA Callback ID structure definition
|
|
||||||
*/
|
|
||||||
typedef enum
|
|
||||||
{
|
|
||||||
HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */
|
|
||||||
HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */
|
|
||||||
HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */
|
|
||||||
HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */
|
|
||||||
HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */
|
|
||||||
}HAL_DMA_CallbackIDTypeDef;
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief DMA handle Structure definition
|
|
||||||
*/
|
|
||||||
typedef struct __DMA_HandleTypeDef
|
|
||||||
{
|
|
||||||
DMA_Channel_TypeDef *Instance; /*!< Register base address */
|
|
||||||
|
|
||||||
DMA_InitTypeDef Init; /*!< DMA communication parameters */
|
|
||||||
|
|
||||||
HAL_LockTypeDef Lock; /*!< DMA locking object */
|
|
||||||
|
|
||||||
__IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
|
|
||||||
|
|
||||||
void *Parent; /*!< Parent object state */
|
|
||||||
|
|
||||||
void (* XferCpltCallback)(struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
|
|
||||||
|
|
||||||
void (* XferHalfCpltCallback)(struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
|
|
||||||
|
|
||||||
void (* XferErrorCallback)(struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
|
|
||||||
|
|
||||||
void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer abort callback */
|
|
||||||
|
|
||||||
__IO uint32_t ErrorCode; /*!< DMA Error code */
|
|
||||||
|
|
||||||
DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */
|
|
||||||
|
|
||||||
uint32_t ChannelIndex; /*!< DMA Channel Index */
|
|
||||||
|
|
||||||
}DMA_HandleTypeDef;
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported constants --------------------------------------------------------*/
|
|
||||||
|
|
||||||
/** @defgroup DMA_Exported_Constants DMA Exported Constants
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup DMA_Error_Code DMA Error Code
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */
|
|
||||||
#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */
|
|
||||||
#define HAL_DMA_ERROR_NO_XFER 0x00000004U /*!< Abort requested with no Xfer ongoing */
|
|
||||||
#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */
|
|
||||||
#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup DMA_request DMA request
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#if defined (STM32L010x4) || defined (STM32L010x6) || defined (STM32L010x8) || defined (STM32L010xC)
|
|
||||||
|
|
||||||
#define DMA_REQUEST_0 0U
|
|
||||||
#define DMA_REQUEST_1 1U
|
|
||||||
#define DMA_REQUEST_4 4U
|
|
||||||
#define DMA_REQUEST_5 5U
|
|
||||||
#define DMA_REQUEST_6 6U
|
|
||||||
#define DMA_REQUEST_8 8U
|
|
||||||
|
|
||||||
#define IS_DMA_ALL_REQUEST(REQUEST) (((REQUEST) == DMA_REQUEST_0) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_1) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_4) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_5) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_6) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_8))
|
|
||||||
|
|
||||||
/* STM32L010x4 || STM32L010x6 || STM32L010x8 || STM32L010xC */
|
|
||||||
|
|
||||||
#elif defined (STM32L021xx) || defined (STM32L041xx) || defined (STM32L062xx) || defined (STM32L063xx) || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
|
|
||||||
|
|
||||||
#define DMA_REQUEST_0 0U
|
|
||||||
#define DMA_REQUEST_1 1U
|
|
||||||
#define DMA_REQUEST_2 2U
|
|
||||||
#define DMA_REQUEST_3 3U
|
|
||||||
#define DMA_REQUEST_4 4U
|
|
||||||
#define DMA_REQUEST_5 5U
|
|
||||||
#define DMA_REQUEST_6 6U
|
|
||||||
#define DMA_REQUEST_7 7U
|
|
||||||
#define DMA_REQUEST_8 8U
|
|
||||||
#define DMA_REQUEST_9 9U
|
|
||||||
#define DMA_REQUEST_10 10U
|
|
||||||
#define DMA_REQUEST_11 11U /* AES product only */
|
|
||||||
#define DMA_REQUEST_12 12U
|
|
||||||
#define DMA_REQUEST_13 13U
|
|
||||||
#define DMA_REQUEST_14 14U
|
|
||||||
#define DMA_REQUEST_15 15U
|
|
||||||
|
|
||||||
#define IS_DMA_ALL_REQUEST(REQUEST) (((REQUEST) == DMA_REQUEST_0) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_1) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_2) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_3) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_4) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_5) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_6) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_7) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_8) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_9) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_10) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_11) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_12) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_13) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_14) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_15))
|
|
||||||
|
|
||||||
/* (STM32L021xx) || (STM32L041xx) || (STM32L062xx) || (STM32L063xx) || (STM32L081xx) || (STM32L082xx) || (STM32L083xx) */
|
|
||||||
|
|
||||||
#else
|
|
||||||
|
|
||||||
#define DMA_REQUEST_0 0U
|
|
||||||
#define DMA_REQUEST_1 1U
|
|
||||||
#define DMA_REQUEST_2 2U
|
|
||||||
#define DMA_REQUEST_3 3U
|
|
||||||
#define DMA_REQUEST_4 4U
|
|
||||||
#define DMA_REQUEST_5 5U
|
|
||||||
#define DMA_REQUEST_6 6U
|
|
||||||
#define DMA_REQUEST_7 7U
|
|
||||||
#define DMA_REQUEST_8 8U
|
|
||||||
#define DMA_REQUEST_9 9U
|
|
||||||
#define DMA_REQUEST_10 10U
|
|
||||||
#define DMA_REQUEST_12 12U
|
|
||||||
#define DMA_REQUEST_13 13U
|
|
||||||
#define DMA_REQUEST_14 14U
|
|
||||||
#define DMA_REQUEST_15 15U
|
|
||||||
|
|
||||||
#define IS_DMA_ALL_REQUEST(REQUEST) (((REQUEST) == DMA_REQUEST_0) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_1) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_2) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_3) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_4) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_5) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_6) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_7) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_8) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_9) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_10) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_12) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_13) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_14) || \
|
|
||||||
((REQUEST) == DMA_REQUEST_15))
|
|
||||||
|
|
||||||
#endif /* (STM32L031xx) || (STM32L051xx) || (STM32L052xx) || (STM32L053xx) || (STM32L071xx) || (STM32L072xx) || (STM32L073xx) */
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */
|
|
||||||
#define DMA_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */
|
|
||||||
#define DMA_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define DMA_PINC_ENABLE DMA_CCR_PINC /*!< Peripheral increment mode Enable */
|
|
||||||
#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode Disable */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define DMA_MINC_ENABLE DMA_CCR_MINC /*!< Memory increment mode Enable */
|
|
||||||
#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode Disable */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */
|
|
||||||
#define DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */
|
|
||||||
#define DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup DMA_Memory_data_size DMA Memory data size
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */
|
|
||||||
#define DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */
|
|
||||||
#define DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup DMA_mode DMA mode
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define DMA_NORMAL 0x00000000U /*!< Normal mode */
|
|
||||||
#define DMA_CIRCULAR DMA_CCR_CIRC /*!< Circular mode */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup DMA_Priority_level DMA Priority level
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */
|
|
||||||
#define DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */
|
|
||||||
#define DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */
|
|
||||||
#define DMA_PRIORITY_VERY_HIGH DMA_CCR_PL /*!< Priority level : Very_High */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define DMA_IT_TC DMA_CCR_TCIE
|
|
||||||
#define DMA_IT_HT DMA_CCR_HTIE
|
|
||||||
#define DMA_IT_TE DMA_CCR_TEIE
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup DMA_flag_definitions DMA flag definitions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define DMA_FLAG_GL1 DMA_ISR_GIF1
|
|
||||||
#define DMA_FLAG_TC1 DMA_ISR_TCIF1
|
|
||||||
#define DMA_FLAG_HT1 DMA_ISR_HTIF1
|
|
||||||
#define DMA_FLAG_TE1 DMA_ISR_TEIF1
|
|
||||||
#define DMA_FLAG_GL2 DMA_ISR_GIF2
|
|
||||||
#define DMA_FLAG_TC2 DMA_ISR_TCIF2
|
|
||||||
#define DMA_FLAG_HT2 DMA_ISR_HTIF2
|
|
||||||
#define DMA_FLAG_TE2 DMA_ISR_TEIF2
|
|
||||||
#define DMA_FLAG_GL3 DMA_ISR_GIF3
|
|
||||||
#define DMA_FLAG_TC3 DMA_ISR_TCIF3
|
|
||||||
#define DMA_FLAG_HT3 DMA_ISR_HTIF3
|
|
||||||
#define DMA_FLAG_TE3 DMA_ISR_TEIF3
|
|
||||||
#define DMA_FLAG_GL4 DMA_ISR_GIF4
|
|
||||||
#define DMA_FLAG_TC4 DMA_ISR_TCIF4
|
|
||||||
#define DMA_FLAG_HT4 DMA_ISR_HTIF4
|
|
||||||
#define DMA_FLAG_TE4 DMA_ISR_TEIF4
|
|
||||||
#define DMA_FLAG_GL5 DMA_ISR_GIF5
|
|
||||||
#define DMA_FLAG_TC5 DMA_ISR_TCIF5
|
|
||||||
#define DMA_FLAG_HT5 DMA_ISR_HTIF5
|
|
||||||
#define DMA_FLAG_TE5 DMA_ISR_TEIF5
|
|
||||||
#define DMA_FLAG_GL6 DMA_ISR_GIF6
|
|
||||||
#define DMA_FLAG_TC6 DMA_ISR_TCIF6
|
|
||||||
#define DMA_FLAG_HT6 DMA_ISR_HTIF6
|
|
||||||
#define DMA_FLAG_TE6 DMA_ISR_TEIF6
|
|
||||||
#define DMA_FLAG_GL7 DMA_ISR_GIF7
|
|
||||||
#define DMA_FLAG_TC7 DMA_ISR_TCIF7
|
|
||||||
#define DMA_FLAG_HT7 DMA_ISR_HTIF7
|
|
||||||
#define DMA_FLAG_TE7 DMA_ISR_TEIF7
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported macros -----------------------------------------------------------*/
|
|
||||||
/** @defgroup DMA_Exported_Macros DMA Exported Macros
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @brief Reset DMA handle state
|
|
||||||
* @param __HANDLE__ DMA handle
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enable the specified DMA Channel.
|
|
||||||
* @param __HANDLE__ DMA handle
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disable the specified DMA Channel.
|
|
||||||
* @param __HANDLE__ DMA handle
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN)
|
|
||||||
|
|
||||||
|
|
||||||
/* Interrupt & Flag management */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Return the current DMA Channel transfer complete flag.
|
|
||||||
* @param __HANDLE__: DMA handle
|
|
||||||
* @retval The specified transfer complete flag index.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#if defined (STM32L010x4) || defined (STM32L011xx) || defined (STM32L021xx)
|
|
||||||
#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
|
|
||||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
|
|
||||||
DMA_FLAG_TC5)
|
|
||||||
#else
|
|
||||||
#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
|
|
||||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
|
|
||||||
DMA_FLAG_TC7)
|
|
||||||
#endif
|
|
||||||
/**
|
|
||||||
* @brief Return the current DMA Channel half transfer complete flag.
|
|
||||||
* @param __HANDLE__ DMA handle
|
|
||||||
* @retval The specified half transfer complete flag index.
|
|
||||||
*/
|
|
||||||
#if defined (STM32L010x4) || defined (STM32L011xx) || defined (STM32L021xx)
|
|
||||||
#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
|
|
||||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
|
|
||||||
DMA_FLAG_HT5)
|
|
||||||
#else
|
|
||||||
#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
|
|
||||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
|
|
||||||
DMA_FLAG_HT7)
|
|
||||||
#endif
|
|
||||||
/**
|
|
||||||
* @brief Returns the current DMA Channel transfer error flag.
|
|
||||||
* @param __HANDLE__ DMA handle
|
|
||||||
* @retval The specified transfer error flag index.
|
|
||||||
*/
|
|
||||||
#if defined (STM32L010x4) || defined (STM32L011xx) || defined (STM32L021xx)
|
|
||||||
#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
|
|
||||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
|
|
||||||
DMA_FLAG_TE5)
|
|
||||||
#else
|
|
||||||
#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
|
|
||||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
|
|
||||||
DMA_FLAG_TE7)
|
|
||||||
#endif
|
|
||||||
/**
|
|
||||||
* @brief Returns the current DMA Channel Global interrupt flag.
|
|
||||||
* @param __HANDLE__ DMA handle
|
|
||||||
* @retval The specified transfer error flag index.
|
|
||||||
*/
|
|
||||||
#if defined (STM32L010x4) || defined (STM32L011xx) || defined (STM32L021xx)
|
|
||||||
#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\
|
|
||||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_ISR_GIF1 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_ISR_GIF2 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_ISR_GIF3 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_ISR_GIF4 :\
|
|
||||||
DMA_ISR_GIF5)
|
|
||||||
#else
|
|
||||||
#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\
|
|
||||||
(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_ISR_GIF1 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_ISR_GIF2 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_ISR_GIF3 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_ISR_GIF4 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_ISR_GIF5 :\
|
|
||||||
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_ISR_GIF6 :\
|
|
||||||
DMA_ISR_GIF7)
|
|
||||||
#endif
|
|
||||||
/**
|
|
||||||
* @brief Get the DMA Channel pending flags.
|
|
||||||
* @param __HANDLE__ DMA handle
|
|
||||||
* @param __FLAG__ Get the specified flag.
|
|
||||||
* This parameter can be any combination of the following values:
|
|
||||||
* @arg DMA_FLAG_TCIFx: Transfer complete flag
|
|
||||||
* @arg DMA_FLAG_HTIFx: Half transfer complete flag
|
|
||||||
* @arg DMA_FLAG_TEIFx: Transfer error flag
|
|
||||||
* @arg DMA_ISR_GIFx: Global interrupt flag
|
|
||||||
* Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.
|
|
||||||
* @retval The state of FLAG (SET or RESET).
|
|
||||||
*/
|
|
||||||
#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Clears the DMA Channel pending flags.
|
|
||||||
* @param __HANDLE__ DMA handle
|
|
||||||
* @param __FLAG__ specifies the flag to clear.
|
|
||||||
* This parameter can be any combination of the following values:
|
|
||||||
* @arg DMA_FLAG_TCx: Transfer complete flag
|
|
||||||
* @arg DMA_FLAG_HTx: Half transfer complete flag
|
|
||||||
* @arg DMA_FLAG_TEx: Transfer error flag
|
|
||||||
* @arg DMA_FLAG_GLx: Global interrupt flag
|
|
||||||
* Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enable the specified DMA Channel interrupts.
|
|
||||||
* @param __HANDLE__ DMA handle
|
|
||||||
* @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
|
|
||||||
* This parameter can be any combination of the following values:
|
|
||||||
* @arg DMA_IT_TC: Transfer complete interrupt mask
|
|
||||||
* @arg DMA_IT_HT: Half transfer complete interrupt mask
|
|
||||||
* @arg DMA_IT_TE: Transfer error interrupt mask
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disable the specified DMA Channel interrupts.
|
|
||||||
* @param __HANDLE__ DMA handle
|
|
||||||
* @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
|
|
||||||
* This parameter can be any combination of the following values:
|
|
||||||
* @arg DMA_IT_TC: Transfer complete interrupt mask
|
|
||||||
* @arg DMA_IT_HT: Half transfer complete interrupt mask
|
|
||||||
* @arg DMA_IT_TE: Transfer error interrupt mask
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Check whether the specified DMA Channel interrupt is enabled or not.
|
|
||||||
* @param __HANDLE__ DMA handle
|
|
||||||
* @param __INTERRUPT__ specifies the DMA interrupt source to check.
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg DMA_IT_TC: Transfer complete interrupt mask
|
|
||||||
* @arg DMA_IT_HT: Half transfer complete interrupt mask
|
|
||||||
* @arg DMA_IT_TE: Transfer error interrupt mask
|
|
||||||
* @retval The state of DMA_IT (SET or RESET).
|
|
||||||
*/
|
|
||||||
#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__)))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Return the number of remaining data units in the current DMA Channel transfer.
|
|
||||||
* @param __HANDLE__ DMA handle
|
|
||||||
* @retval The number of remaining data units in the current DMA Channel transfer.
|
|
||||||
*/
|
|
||||||
#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported functions --------------------------------------------------------*/
|
|
||||||
|
|
||||||
/** @addtogroup DMA_Exported_Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup DMA_Exported_Functions_Group1
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/* Initialization and de-initialization functions *****************************/
|
|
||||||
HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
|
|
||||||
HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma);
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup DMA_Exported_Functions_Group2
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/* IO operation functions *****************************************************/
|
|
||||||
HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
|
|
||||||
HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
|
|
||||||
HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
|
|
||||||
HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
|
|
||||||
HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout);
|
|
||||||
void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
|
|
||||||
HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma));
|
|
||||||
HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup DMA_Exported_Functions_Group3
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/* Peripheral State and Error functions ***************************************/
|
|
||||||
HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
|
|
||||||
uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
/* Define the private group ***********************************/
|
|
||||||
/**************************************************************/
|
|
||||||
/** @defgroup DMA_Private DMA Private
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
|
|
||||||
((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
|
|
||||||
((DIRECTION) == DMA_MEMORY_TO_MEMORY))
|
|
||||||
|
|
||||||
#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U))
|
|
||||||
|
|
||||||
#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
|
|
||||||
((STATE) == DMA_PINC_DISABLE))
|
|
||||||
|
|
||||||
#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
|
|
||||||
((STATE) == DMA_MINC_DISABLE))
|
|
||||||
|
|
||||||
#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
|
|
||||||
((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
|
|
||||||
((SIZE) == DMA_PDATAALIGN_WORD))
|
|
||||||
|
|
||||||
#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
|
|
||||||
((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
|
|
||||||
((SIZE) == DMA_MDATAALIGN_WORD ))
|
|
||||||
|
|
||||||
#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
|
|
||||||
((MODE) == DMA_CIRCULAR))
|
|
||||||
|
|
||||||
#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
|
|
||||||
((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
|
|
||||||
((PRIORITY) == DMA_PRIORITY_HIGH) || \
|
|
||||||
((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
/**************************************************************/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif /* STM32L0xx_HAL_DMA_H */
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
@ -1,342 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_ll_exti.h
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief Header file of EXTI LL module.
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright(c) 2020 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
||||||
#ifndef __STM32L0xx_HAL_EXTI_H
|
|
||||||
#define __STM32L0xx_HAL_EXTI_H
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
extern "C" {
|
|
||||||
#endif
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup EXTI EXTI
|
|
||||||
* @brief EXTI HAL module driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported types ------------------------------------------------------------*/
|
|
||||||
/* Exported types ------------------------------------------------------------*/
|
|
||||||
|
|
||||||
/** @defgroup EXTI_Exported_Types EXTI Exported Types
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
typedef enum
|
|
||||||
{
|
|
||||||
HAL_EXTI_COMMON_CB_ID = 0x00U,
|
|
||||||
HAL_EXTI_RISING_CB_ID = 0x01U,
|
|
||||||
HAL_EXTI_FALLING_CB_ID = 0x02U,
|
|
||||||
} EXTI_CallbackIDTypeDef;
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief EXTI Handle structure definition
|
|
||||||
*/
|
|
||||||
typedef struct
|
|
||||||
{
|
|
||||||
uint32_t Line; /*!< Exti line number */
|
|
||||||
void (* PendingCallback)(void); /*!< Exti pending callback */
|
|
||||||
} EXTI_HandleTypeDef;
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief EXTI Configuration structure definition
|
|
||||||
*/
|
|
||||||
typedef struct
|
|
||||||
{
|
|
||||||
uint32_t Line; /*!< The Exti line to be configured. This parameter
|
|
||||||
can be a value of @ref EXTI_Line */
|
|
||||||
uint32_t Mode; /*!< The Exit Mode to be configured for a core.
|
|
||||||
This parameter can be a combination of @ref EXTI_Mode */
|
|
||||||
uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter
|
|
||||||
can be a value of @ref EXTI_Trigger */
|
|
||||||
uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured.
|
|
||||||
This parameter is only possible for line 0 to 15. It
|
|
||||||
can be a value of @ref EXTI_GPIOSel */
|
|
||||||
} EXTI_ConfigTypeDef;
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported constants --------------------------------------------------------*/
|
|
||||||
/** @defgroup EXTI_Exported_Constants EXTI Exported Constants
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup EXTI_Line EXTI Line
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
#define EXTI_LINE_0 (EXTI_GPIO | 0x00u) /*!< External interrupt line 0 */
|
|
||||||
#define EXTI_LINE_1 (EXTI_GPIO | 0x01u) /*!< External interrupt line 1 */
|
|
||||||
#define EXTI_LINE_2 (EXTI_GPIO | 0x02u) /*!< External interrupt line 2 */
|
|
||||||
#define EXTI_LINE_3 (EXTI_GPIO | 0x03u) /*!< External interrupt line 3 */
|
|
||||||
#define EXTI_LINE_4 (EXTI_GPIO | 0x04u) /*!< External interrupt line 4 */
|
|
||||||
#define EXTI_LINE_5 (EXTI_GPIO | 0x05u) /*!< External interrupt line 5 */
|
|
||||||
#define EXTI_LINE_6 (EXTI_GPIO | 0x06u) /*!< External interrupt line 6 */
|
|
||||||
#define EXTI_LINE_7 (EXTI_GPIO | 0x07u) /*!< External interrupt line 7 */
|
|
||||||
#define EXTI_LINE_8 (EXTI_GPIO | 0x08u) /*!< External interrupt line 8 */
|
|
||||||
#define EXTI_LINE_9 (EXTI_GPIO | 0x09u) /*!< External interrupt line 9 */
|
|
||||||
#define EXTI_LINE_10 (EXTI_GPIO | 0x0Au) /*!< External interrupt line 10 */
|
|
||||||
#define EXTI_LINE_11 (EXTI_GPIO | 0x0Bu) /*!< External interrupt line 11 */
|
|
||||||
#define EXTI_LINE_12 (EXTI_GPIO | 0x0Cu) /*!< External interrupt line 12 */
|
|
||||||
#define EXTI_LINE_13 (EXTI_GPIO | 0x0Du) /*!< External interrupt line 13 */
|
|
||||||
#define EXTI_LINE_14 (EXTI_GPIO | 0x0Eu) /*!< External interrupt line 14 */
|
|
||||||
#define EXTI_LINE_15 (EXTI_GPIO | 0x0Fu) /*!< External interrupt line 15 */
|
|
||||||
#if defined(EXTI_IMR_IM16)
|
|
||||||
#define EXTI_LINE_16 (EXTI_CONFIG | 0x10u) /*!< External interrupt line 16 Connected to the PVD Output */
|
|
||||||
#else
|
|
||||||
#define EXTI_LINE_16 (EXTI_RESERVED | 0x10u) /*!< No interrupt supported in this line */
|
|
||||||
#endif /* EXTI_IMR_IM16 */
|
|
||||||
#define EXTI_LINE_17 (EXTI_CONFIG | 0x11u) /*!< External interrupt line 17 Connected to the RTC Alarm event */
|
|
||||||
#if defined(EXTI_IMR_IM18)
|
|
||||||
#define EXTI_LINE_18 (EXTI_DIRECT | 0x12u) /*!< External interrupt line 18 Connected to the USB Wakeup from suspend event */
|
|
||||||
#else
|
|
||||||
#define EXTI_LINE_18 (EXTI_RESERVED | 0x12u) /*!< No interrupt supported in this line */
|
|
||||||
#endif /* EXTI_IMR_IM18 */
|
|
||||||
#define EXTI_LINE_19 (EXTI_CONFIG | 0x13u) /*!< External interrupt line 19 Connected to the RTC Tamper and Time Stamp events or CSS_LSE */
|
|
||||||
#define EXTI_LINE_20 (EXTI_CONFIG | 0x14u) /*!< External interrupt line 20 Connected to the RTC wakeup timer */
|
|
||||||
#if defined(EXTI_IMR_IM21)
|
|
||||||
#define EXTI_LINE_21 (EXTI_CONFIG | 0x15u) /*!< External interrupt line 21 Connected to the Comparator 1 output */
|
|
||||||
#else
|
|
||||||
#define EXTI_LINE_21 (EXTI_RESERVED | 0x15u) /*!< No interrupt supported in this line */
|
|
||||||
#endif /* EXTI_IMR_IM21 */
|
|
||||||
#if defined(EXTI_IMR_IM22)
|
|
||||||
#define EXTI_LINE_22 (EXTI_CONFIG | 0x16u) /*!< External interrupt line 22 Connected to the Comparator 2 output */
|
|
||||||
#else
|
|
||||||
#define EXTI_LINE_22 (EXTI_RESERVED | 0x16u) /*!< No interrupt supported in this line */
|
|
||||||
#endif /* EXTI_IMR_IM22 */
|
|
||||||
#define EXTI_LINE_23 (EXTI_DIRECT | 0x17u) /*!< External interrupt line 23 Connected to the internal I2C1 wakeup event */
|
|
||||||
#if defined(EXTI_IMR_IM24)
|
|
||||||
#define EXTI_LINE_24 (EXTI_DIRECT | 0x18u) /*!< External interrupt line 24 Connected to the internal I2C3 wakeup event */
|
|
||||||
#else
|
|
||||||
#define EXTI_LINE_24 (EXTI_RESERVED | 0x18u) /*!< No interrupt supported in this line */
|
|
||||||
#endif /* EXTI_IMR_IM24 */
|
|
||||||
#if defined(EXTI_IMR_IM25)
|
|
||||||
#define EXTI_LINE_25 (EXTI_DIRECT | 0x19u) /*!< External interrupt line 25 Connected to the internal USART1 wakeup event */
|
|
||||||
#else
|
|
||||||
#define EXTI_LINE_25 (EXTI_RESERVED | 0x19u) /*!< No interrupt supported in this line */
|
|
||||||
#endif /* EXTI_IMR_IM25 */
|
|
||||||
#define EXTI_LINE_26 (EXTI_DIRECT | 0x1Au) /*!< External interrupt line 26 Connected to the internal USART2 wakeup event */
|
|
||||||
#define EXTI_LINE_27 (EXTI_RESERVED | 0x1Bu) /*!< No interrupt supported in this line */
|
|
||||||
#define EXTI_LINE_28 (EXTI_DIRECT | 0x1Cu) /*!< External interrupt line 28 Connected to the LPUART1 Wakeup event */
|
|
||||||
#define EXTI_LINE_29 (EXTI_DIRECT | 0x1Du) /*!< External interrupt line 29 Connected to the LPTIM1 Wakeup event */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup EXTI_Mode EXTI Mode
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define EXTI_MODE_NONE 0x00000000u
|
|
||||||
#define EXTI_MODE_INTERRUPT 0x00000001u
|
|
||||||
#define EXTI_MODE_EVENT 0x00000002u
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup EXTI_Trigger EXTI Trigger
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define EXTI_TRIGGER_NONE 0x00000000u
|
|
||||||
#define EXTI_TRIGGER_RISING 0x00000001u
|
|
||||||
#define EXTI_TRIGGER_FALLING 0x00000002u
|
|
||||||
#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup EXTI_GPIOSel EXTI GPIOSel
|
|
||||||
* @brief
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define EXTI_GPIOA 0x00000000u
|
|
||||||
#define EXTI_GPIOB 0x00000001u
|
|
||||||
#define EXTI_GPIOC 0x00000002u
|
|
||||||
#if defined (GPIOD)
|
|
||||||
#define EXTI_GPIOD 0x00000003u
|
|
||||||
#endif /* GPIOD*/
|
|
||||||
#if defined (GPIOE)
|
|
||||||
#define EXTI_GPIOE 0x00000004u
|
|
||||||
#endif /* GPIOE*/
|
|
||||||
#if defined (GPIOH)
|
|
||||||
#define EXTI_GPIOH 0x00000007u
|
|
||||||
#endif /* GPIOH*/
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported macro ------------------------------------------------------------*/
|
|
||||||
/** @defgroup EXTI_Exported_Macros EXTI Exported Macros
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Private constants --------------------------------------------------------*/
|
|
||||||
/** @defgroup EXTI_Private_Constants EXTI Private Constants
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/**
|
|
||||||
* @brief EXTI Line property definition
|
|
||||||
*/
|
|
||||||
#define EXTI_PROPERTY_SHIFT 24u
|
|
||||||
#define EXTI_DIRECT (0x01uL << EXTI_PROPERTY_SHIFT)
|
|
||||||
#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT)
|
|
||||||
#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG)
|
|
||||||
#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT)
|
|
||||||
#define EXTI_PROPERTY_MASK (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief EXTI bit usage
|
|
||||||
*/
|
|
||||||
#define EXTI_PIN_MASK 0x0000001Fu
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief EXTI Mask for interrupt & event mode
|
|
||||||
*/
|
|
||||||
#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief EXTI Mask for trigger possibilities
|
|
||||||
*/
|
|
||||||
#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief EXTI Line number
|
|
||||||
*/
|
|
||||||
#define EXTI_LINE_NB 30u
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Private macros ------------------------------------------------------------*/
|
|
||||||
/** @defgroup EXTI_Private_Macros EXTI Private Macros
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \
|
|
||||||
((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \
|
|
||||||
(((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \
|
|
||||||
(((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB))
|
|
||||||
|
|
||||||
#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \
|
|
||||||
(((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u))
|
|
||||||
|
|
||||||
#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u)
|
|
||||||
|
|
||||||
#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING)
|
|
||||||
|
|
||||||
#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u)
|
|
||||||
|
|
||||||
#if !defined (GPIOH)
|
|
||||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
|
||||||
((__PORT__) == EXTI_GPIOB) || \
|
|
||||||
((__PORT__) == EXTI_GPIOC))
|
|
||||||
#elif !defined (GPIOD)
|
|
||||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
|
||||||
((__PORT__) == EXTI_GPIOB) || \
|
|
||||||
((__PORT__) == EXTI_GPIOC) || \
|
|
||||||
((__PORT__) == EXTI_GPIOH))
|
|
||||||
#elif !defined (GPIOE)
|
|
||||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
|
||||||
((__PORT__) == EXTI_GPIOB) || \
|
|
||||||
((__PORT__) == EXTI_GPIOC) || \
|
|
||||||
((__PORT__) == EXTI_GPIOD) || \
|
|
||||||
((__PORT__) == EXTI_GPIOH))
|
|
||||||
#else
|
|
||||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
|
||||||
((__PORT__) == EXTI_GPIOB) || \
|
|
||||||
((__PORT__) == EXTI_GPIOC) || \
|
|
||||||
((__PORT__) == EXTI_GPIOD) || \
|
|
||||||
((__PORT__) == EXTI_GPIOE) || \
|
|
||||||
((__PORT__) == EXTI_GPIOH))
|
|
||||||
#endif /* GPIOH */
|
|
||||||
|
|
||||||
#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
/* Exported functions --------------------------------------------------------*/
|
|
||||||
/** @defgroup EXTI_Exported_Functions EXTI Exported Functions
|
|
||||||
* @brief EXTI Exported Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions
|
|
||||||
* @brief Configuration functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/* Configuration functions ****************************************************/
|
|
||||||
HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
|
|
||||||
HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
|
|
||||||
HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti);
|
|
||||||
HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void));
|
|
||||||
HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine);
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions
|
|
||||||
* @brief IO operation functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/* IO operation functions *****************************************************/
|
|
||||||
void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti);
|
|
||||||
uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
|
|
||||||
void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
|
|
||||||
void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif /* STM32L0xx_HAL_EXTI_H */
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
@ -1,378 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_flash.h
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief Header file of Flash HAL module.
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
||||||
#ifndef __STM32L0xx_HAL_FLASH_H
|
|
||||||
#define __STM32L0xx_HAL_FLASH_H
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
extern "C" {
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal_def.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASH
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASH_Private_Constants
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define FLASH_TIMEOUT_VALUE (50000U) /* 50 s */
|
|
||||||
#define FLASH_SIZE_DATA_REGISTER FLASHSIZE_BASE
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASH_Private_Macros
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define IS_FLASH_TYPEPROGRAM(_VALUE_) ((_VALUE_) == FLASH_TYPEPROGRAM_WORD)
|
|
||||||
|
|
||||||
#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \
|
|
||||||
((__LATENCY__) == FLASH_LATENCY_1))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported types ------------------------------------------------------------*/
|
|
||||||
/** @defgroup FLASH_Exported_Types FLASH Exported Types
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief FLASH Procedure structure definition
|
|
||||||
*/
|
|
||||||
typedef enum
|
|
||||||
{
|
|
||||||
FLASH_PROC_NONE = 0,
|
|
||||||
FLASH_PROC_PAGEERASE = 1,
|
|
||||||
FLASH_PROC_PROGRAM = 2,
|
|
||||||
} FLASH_ProcedureTypeDef;
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief FLASH handle Structure definition
|
|
||||||
*/
|
|
||||||
typedef struct
|
|
||||||
{
|
|
||||||
__IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */
|
|
||||||
|
|
||||||
__IO uint32_t NbPagesToErase; /*!< Internal variable to save the remaining sectors to erase in IT context*/
|
|
||||||
|
|
||||||
__IO uint32_t Address; /*!< Internal variable to save address selected for program or erase */
|
|
||||||
|
|
||||||
__IO uint32_t Page; /*!< Internal variable to define the current page which is erasing */
|
|
||||||
|
|
||||||
HAL_LockTypeDef Lock; /*!< FLASH locking object */
|
|
||||||
|
|
||||||
__IO uint32_t ErrorCode; /*!< FLASH error code
|
|
||||||
This parameter can be a value of @ref FLASH_Error_Codes */
|
|
||||||
} FLASH_ProcessTypeDef;
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported constants --------------------------------------------------------*/
|
|
||||||
/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASH_Error_Codes FLASH Error Codes
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define HAL_FLASH_ERROR_NONE 0x00U /*!< No error */
|
|
||||||
#define HAL_FLASH_ERROR_PGA 0x01U /*!< Programming alignment error */
|
|
||||||
#define HAL_FLASH_ERROR_WRP 0x02U /*!< Write protection error */
|
|
||||||
#define HAL_FLASH_ERROR_OPTV 0x04U /*!< Option validity error */
|
|
||||||
#define HAL_FLASH_ERROR_SIZE 0x08U /*!< */
|
|
||||||
#define HAL_FLASH_ERROR_RD 0x10U /*!< Read protected error */
|
|
||||||
#define HAL_FLASH_ERROR_FWWERR 0x20U /*!< FLASH Write or Erase operation aborted */
|
|
||||||
#define HAL_FLASH_ERROR_NOTZERO 0x40U /*!< FLASH Write operation is done in a not-erased region */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASH_Page_Size FLASH size information
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define FLASH_SIZE (uint32_t)((*((uint32_t *)FLASHSIZE_BASE)&0xFFFF) * 1024U)
|
|
||||||
#define FLASH_PAGE_SIZE (128U) /*!< FLASH Page Size in bytes */
|
|
||||||
|
|
||||||
#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1) /*!< FLASH end address in the alias region */
|
|
||||||
|
|
||||||
#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
|
|
||||||
#define FLASH_BANK2_BASE (FLASH_BASE + (FLASH_SIZE >> 1)) /*!< FLASH BANK2 base address in the alias region */
|
|
||||||
#define FLASH_BANK1_END (FLASH_BANK2_BASE - 1) /*!< Program end FLASH BANK1 address */
|
|
||||||
#define FLASH_BANK2_END (FLASH_END) /*!< Program end FLASH BANK2 address */
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASH_Type_Program FLASH Type Program
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define FLASH_TYPEPROGRAM_WORD (0x02U) /*!<Program a word (32-bit) at a specified address.*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASH_Latency FLASH Latency
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define FLASH_LATENCY_0 (0x00000000U) /*!< FLASH Zero Latency cycle */
|
|
||||||
#define FLASH_LATENCY_1 FLASH_ACR_LATENCY /*!< FLASH One Latency cycle */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASH_Interrupts FLASH Interrupts
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define FLASH_IT_EOP FLASH_PECR_EOPIE /*!< End of programming interrupt source */
|
|
||||||
#define FLASH_IT_ERR FLASH_PECR_ERRIE /*!< Error interrupt source */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASH_Flags FLASH Flags
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
|
|
||||||
#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Programming flag */
|
|
||||||
#define FLASH_FLAG_ENDHV FLASH_SR_HVOFF /*!< FLASH End of High Voltage flag */
|
|
||||||
#define FLASH_FLAG_READY FLASH_SR_READY /*!< FLASH Ready flag after low power mode */
|
|
||||||
#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
|
|
||||||
#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
|
|
||||||
#define FLASH_FLAG_SIZERR FLASH_SR_SIZERR /*!< FLASH Size error flag */
|
|
||||||
#define FLASH_FLAG_OPTVERR FLASH_SR_OPTVERR /*!< FLASH Option Validity error flag */
|
|
||||||
#define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< FLASH Read protected error flag */
|
|
||||||
#define FLASH_FLAG_FWWERR FLASH_SR_FWWERR /*!< FLASH Write or Errase operation aborted */
|
|
||||||
#define FLASH_FLAG_NOTZEROERR FLASH_SR_NOTZEROERR /*!< FLASH Read protected error flag */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASH_Keys FLASH Keys
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define FLASH_PDKEY1 (0x04152637U) /*!< Flash power down key1 */
|
|
||||||
#define FLASH_PDKEY2 (0xFAFBFCFDU) /*!< Flash power down key2: used with FLASH_PDKEY1
|
|
||||||
to unlock the RUN_PD bit in FLASH_ACR */
|
|
||||||
|
|
||||||
#define FLASH_PEKEY1 (0x89ABCDEFU) /*!< Flash program erase key1 */
|
|
||||||
#define FLASH_PEKEY2 (0x02030405U) /*!< Flash program erase key: used with FLASH_PEKEY2
|
|
||||||
to unlock the write access to the FLASH_PECR register and
|
|
||||||
data EEPROM */
|
|
||||||
|
|
||||||
#define FLASH_PRGKEY1 (0x8C9DAEBFU) /*!< Flash program memory key1 */
|
|
||||||
#define FLASH_PRGKEY2 (0x13141516U) /*!< Flash program memory key2: used with FLASH_PRGKEY2
|
|
||||||
to unlock the program memory */
|
|
||||||
|
|
||||||
#define FLASH_OPTKEY1 (0xFBEAD9C8U) /*!< Flash option key1 */
|
|
||||||
#define FLASH_OPTKEY2 (0x24252627U) /*!< Flash option key2: used with FLASH_OPTKEY1 to
|
|
||||||
unlock the write access to the option byte block */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* CMSIS_Legacy */
|
|
||||||
|
|
||||||
#if defined ( __ICCARM__ )
|
|
||||||
#define InterruptType_ACTLR_DISMCYCINT_Msk IntType_ACTLR_DISMCYCINT_Msk
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported macro ------------------------------------------------------------*/
|
|
||||||
|
|
||||||
/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
|
|
||||||
* @brief macros to control FLASH features
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
/** @defgroup FLASH_Interrupt FLASH Interrupts
|
|
||||||
* @brief macros to handle FLASH interrupts
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enable the specified FLASH interrupt.
|
|
||||||
* @param __INTERRUPT__ FLASH interrupt
|
|
||||||
* This parameter can be any combination of the following values:
|
|
||||||
* @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
|
|
||||||
* @arg @ref FLASH_IT_ERR Error Interrupt
|
|
||||||
* @retval none
|
|
||||||
*/
|
|
||||||
#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) SET_BIT((FLASH->PECR), (__INTERRUPT__))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disable the specified FLASH interrupt.
|
|
||||||
* @param __INTERRUPT__ FLASH interrupt
|
|
||||||
* This parameter can be any combination of the following values:
|
|
||||||
* @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
|
|
||||||
* @arg @ref FLASH_IT_ERR Error Interrupt
|
|
||||||
* @retval none
|
|
||||||
*/
|
|
||||||
#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) CLEAR_BIT((FLASH->PECR), (uint32_t)(__INTERRUPT__))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Get the specified FLASH flag status.
|
|
||||||
* @param __FLAG__ specifies the FLASH flag to check.
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg @ref FLASH_FLAG_BSY FLASH Busy flag
|
|
||||||
* @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag
|
|
||||||
* @arg @ref FLASH_FLAG_ENDHV FLASH End of High Voltage flag
|
|
||||||
* @arg @ref FLASH_FLAG_READY FLASH Ready flag after low power mode
|
|
||||||
* @arg @ref FLASH_FLAG_PGAERR FLASH Programming Alignment error flag
|
|
||||||
* @arg @ref FLASH_FLAG_SIZERR FLASH Size error flag
|
|
||||||
* @arg @ref FLASH_FLAG_OPTVERR FLASH Option validity error flag (not valid with STM32L031xx/STM32L041xx)
|
|
||||||
* @arg @ref FLASH_FLAG_RDERR FLASH Read protected error flag
|
|
||||||
* @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag
|
|
||||||
* @arg @ref FLASH_FLAG_FWWERR FLASH Fetch While Write Error flag
|
|
||||||
* @arg @ref FLASH_FLAG_NOTZEROERR Not Zero area error flag
|
|
||||||
* @retval The new state of __FLAG__ (SET or RESET).
|
|
||||||
*/
|
|
||||||
#define __HAL_FLASH_GET_FLAG(__FLAG__) (((FLASH->SR) & (__FLAG__)) == (__FLAG__))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Clear the specified FLASH flag.
|
|
||||||
* @param __FLAG__ specifies the FLASH flags to clear.
|
|
||||||
* This parameter can be any combination of the following values:
|
|
||||||
* @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag
|
|
||||||
* @arg @ref FLASH_FLAG_PGAERR FLASH Programming Alignment error flag
|
|
||||||
* @arg @ref FLASH_FLAG_SIZERR FLASH Size error flag
|
|
||||||
* @arg @ref FLASH_FLAG_OPTVERR FLASH Option validity error flag (not valid with STM32L031xx/STM32L041xx)
|
|
||||||
* @arg @ref FLASH_FLAG_RDERR FLASH Read protected error flag
|
|
||||||
* @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag
|
|
||||||
* @arg @ref FLASH_FLAG_FWWERR FLASH Fetch While Write Error flag
|
|
||||||
* @arg @ref FLASH_FLAG_NOTZEROERR Not Zero area error flag
|
|
||||||
* @retval none
|
|
||||||
*/
|
|
||||||
#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) ((FLASH->SR) = (__FLAG__))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Include FLASH HAL Extended module */
|
|
||||||
#include "stm32l0xx_hal_flash_ex.h"
|
|
||||||
#include "stm32l0xx_hal_flash_ramfunc.h"
|
|
||||||
|
|
||||||
/* Exported functions --------------------------------------------------------*/
|
|
||||||
/** @addtogroup FLASH_Exported_Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASH_Exported_Functions_Group1
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/* IO operation functions *****************************************************/
|
|
||||||
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint32_t Data);
|
|
||||||
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint32_t Data);
|
|
||||||
|
|
||||||
/* FLASH IRQ handler function */
|
|
||||||
void HAL_FLASH_IRQHandler(void);
|
|
||||||
/* Callbacks in non blocking modes */
|
|
||||||
void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
|
|
||||||
void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASH_Exported_Functions_Group2
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/* Peripheral Control functions ***********************************************/
|
|
||||||
HAL_StatusTypeDef HAL_FLASH_Unlock(void);
|
|
||||||
HAL_StatusTypeDef HAL_FLASH_Lock(void);
|
|
||||||
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
|
|
||||||
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
|
|
||||||
HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASH_Exported_Functions_Group3
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/* Peripheral State and Error functions ***************************************/
|
|
||||||
uint32_t HAL_FLASH_GetError(void);
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Private function -------------------------------------------------*/
|
|
||||||
/** @addtogroup FLASH_Private_Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif /* __STM32L0xx_HAL_FLASH_H */
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
|
|
||||||
@ -1,811 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_flash_ex.h
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief Header file of Flash HAL Extended module.
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
||||||
#ifndef __STM32L0xx_HAL_FLASH_EX_H
|
|
||||||
#define __STM32L0xx_HAL_FLASH_EX_H
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
extern "C" {
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal_def.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASHEx
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASHEx_Private_Constants
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define FLASH_SIZE_DATA_REGISTER FLASHSIZE_BASE
|
|
||||||
|
|
||||||
#define FLASH_NBPAGES_MAX (FLASH_SIZE / FLASH_PAGE_SIZE)
|
|
||||||
|
|
||||||
#define WRP_MASK_LOW (0x0000FFFFU)
|
|
||||||
#define WRP_MASK_HIGH (0xFFFF0000U)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASHEx_Private_Macros
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define IS_FLASH_TYPEERASE(__VALUE__) (((__VALUE__) == FLASH_TYPEERASE_PAGES))
|
|
||||||
|
|
||||||
#define IS_OPTIONBYTE(__VALUE__) (((__VALUE__) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | \
|
|
||||||
OPTIONBYTE_USER | OPTIONBYTE_BOR | OPTIONBYTE_BOOT_BIT1)))
|
|
||||||
|
|
||||||
#define IS_WRPSTATE(__VALUE__) (((__VALUE__) == OB_WRPSTATE_DISABLE) || \
|
|
||||||
((__VALUE__) == OB_WRPSTATE_ENABLE))
|
|
||||||
|
|
||||||
#define IS_OB_WRP(__PAGE__) (((__PAGE__) != 0x0000000U))
|
|
||||||
|
|
||||||
#define IS_OB_RDP(__LEVEL__) (((__LEVEL__) == OB_RDP_LEVEL_0) ||\
|
|
||||||
((__LEVEL__) == OB_RDP_LEVEL_1) ||\
|
|
||||||
((__LEVEL__) == OB_RDP_LEVEL_2))
|
|
||||||
|
|
||||||
#define IS_OB_BOR_LEVEL(__LEVEL__) (((__LEVEL__) == OB_BOR_OFF) || \
|
|
||||||
((__LEVEL__) == OB_BOR_LEVEL1) || \
|
|
||||||
((__LEVEL__) == OB_BOR_LEVEL2) || \
|
|
||||||
((__LEVEL__) == OB_BOR_LEVEL3) || \
|
|
||||||
((__LEVEL__) == OB_BOR_LEVEL4) || \
|
|
||||||
((__LEVEL__) == OB_BOR_LEVEL5))
|
|
||||||
|
|
||||||
#define IS_OB_IWDG_SOURCE(__SOURCE__) (((__SOURCE__) == OB_IWDG_SW) || ((__SOURCE__) == OB_IWDG_HW))
|
|
||||||
|
|
||||||
#define IS_OB_STOP_SOURCE(__SOURCE__) (((__SOURCE__) == OB_STOP_NORST) || ((__SOURCE__) == OB_STOP_RST))
|
|
||||||
|
|
||||||
#define IS_OB_STDBY_SOURCE(__SOURCE__) (((__SOURCE__) == OB_STDBY_NORST) || ((__SOURCE__) == OB_STDBY_RST))
|
|
||||||
|
|
||||||
#if defined(FLASH_OPTR_WPRMOD) && defined(FLASH_OPTR_BFB2)
|
|
||||||
|
|
||||||
#define IS_OBEX(__VALUE__) (((__VALUE__) <= (OPTIONBYTE_PCROP | OPTIONBYTE_BOOTCONFIG)) && ((__VALUE__) != 0U))
|
|
||||||
|
|
||||||
#elif defined(FLASH_OPTR_WPRMOD) && !defined(FLASH_OPTR_BFB2)
|
|
||||||
|
|
||||||
#define IS_OBEX(__VALUE__) ((__VALUE__) == OPTIONBYTE_PCROP)
|
|
||||||
|
|
||||||
#elif !defined(FLASH_OPTR_WPRMOD) && defined(FLASH_OPTR_BFB2)
|
|
||||||
|
|
||||||
#define IS_OBEX(__VALUE__) ((__VALUE__) == OPTIONBYTE_BOOTCONFIG)
|
|
||||||
|
|
||||||
#endif /* FLASH_OPTR_WPRMOD && FLASH_OPTR_BFB2 */
|
|
||||||
|
|
||||||
#if defined(FLASH_OPTR_WPRMOD)
|
|
||||||
|
|
||||||
#define IS_PCROPSTATE(__VALUE__) (((__VALUE__) == OB_PCROP_STATE_DISABLE) || \
|
|
||||||
((__VALUE__) == OB_PCROP_STATE_ENABLE))
|
|
||||||
|
|
||||||
#define IS_OB_PCROP(__PAGE__) (((__PAGE__) != 0x0000000U))
|
|
||||||
#endif /* FLASH_OPTR_WPRMOD */
|
|
||||||
|
|
||||||
#if defined(FLASH_OPTR_BFB2)
|
|
||||||
|
|
||||||
#define IS_OB_BOOT_BANK(__BANK__) (((__BANK__) == OB_BOOT_BANK2) || ((__BANK__) == OB_BOOT_BANK1))
|
|
||||||
|
|
||||||
#endif /* FLASH_OPTR_BFB2 */
|
|
||||||
|
|
||||||
#define IS_OB_BOOT1(__BOOT_BIT1__) (((__BOOT_BIT1__) == OB_BOOT_BIT1_RESET) || ((__BOOT_BIT1__) == OB_BOOT_BIT1_SET))
|
|
||||||
#define IS_TYPEPROGRAMDATA(__VALUE__) (((__VALUE__) == FLASH_TYPEPROGRAMDATA_BYTE) || \
|
|
||||||
((__VALUE__) == FLASH_TYPEPROGRAMDATA_HALFWORD) || \
|
|
||||||
((__VALUE__) == FLASH_TYPEPROGRAMDATA_WORD))
|
|
||||||
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_Address FLASHEx Address
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
|
|
||||||
|
|
||||||
#define IS_FLASH_DATA_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= DATA_EEPROM_BASE) && ((__ADDRESS__) <= DATA_EEPROM_BANK2_END))
|
|
||||||
#define IS_FLASH_DATA_BANK1_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= DATA_EEPROM_BASE) && ((__ADDRESS__) <= DATA_EEPROM_BANK1_END))
|
|
||||||
#define IS_FLASH_DATA_BANK2_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= DATA_EEPROM_BANK2_BASE) && ((__ADDRESS__) <= DATA_EEPROM_BANK2_END))
|
|
||||||
#define IS_FLASH_PROGRAM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= FLASH_BASE) && ((__ADDRESS__) < (FLASH_BASE + FLASH_SIZE)))
|
|
||||||
#define IS_FLASH_PROGRAM_BANK1_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= FLASH_BASE) && ((__ADDRESS__) < (FLASH_BASE + (FLASH_SIZE >> 1))))
|
|
||||||
#define IS_FLASH_PROGRAM_BANK2_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= FLASH_BANK2_BASE) && ((__ADDRESS__) < (FLASH_BASE + FLASH_SIZE)))
|
|
||||||
#else
|
|
||||||
#define IS_FLASH_DATA_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= DATA_EEPROM_BASE) && ((__ADDRESS__) <= DATA_EEPROM_END))
|
|
||||||
#define IS_FLASH_PROGRAM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= FLASH_BASE) && ((__ADDRESS__) < (FLASH_BASE + FLASH_SIZE)))
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define IS_NBPAGES(__PAGES__) (((__PAGES__) >= 1) && ((__PAGES__) <= FLASH_NBPAGES_MAX))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
/* Exported types ------------------------------------------------------------*/
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_Exported_Types FLASHEx Exported Types
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief FLASH Erase structure definition
|
|
||||||
*/
|
|
||||||
typedef struct
|
|
||||||
{
|
|
||||||
uint32_t TypeErase; /*!< TypeErase: Page Erase only.
|
|
||||||
This parameter can be a value of @ref FLASHEx_Type_Erase */
|
|
||||||
|
|
||||||
uint32_t PageAddress; /*!< PageAddress: Initial FLASH address to be erased
|
|
||||||
This parameter must be a value belonging to FLASH Programm address (depending on the devices) */
|
|
||||||
|
|
||||||
uint32_t NbPages; /*!< NbPages: Number of pages to be erased.
|
|
||||||
This parameter must be a value between 1 and (max number of pages - value of Initial page)*/
|
|
||||||
|
|
||||||
} FLASH_EraseInitTypeDef;
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief FLASH Option Bytes PROGRAM structure definition
|
|
||||||
*/
|
|
||||||
typedef struct
|
|
||||||
{
|
|
||||||
uint32_t OptionType; /*!< OptionType: Option byte to be configured.
|
|
||||||
This parameter can be a value of @ref FLASHEx_Option_Type */
|
|
||||||
|
|
||||||
uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation.
|
|
||||||
This parameter can be a value of @ref FLASHEx_WRP_State */
|
|
||||||
|
|
||||||
uint32_t WRPSector; /*!< WRPSector: This bitfield specifies the sector (s) which are write protected.
|
|
||||||
This parameter can be a combination of @ref FLASHEx_Option_Bytes_Write_Protection */
|
|
||||||
|
|
||||||
#if defined(STM32L071xx) || defined(STM32L072xx) || defined(STM32L073xx) || defined(STM32L081xx) || defined(STM32L082xx) || defined(STM32L083xx)
|
|
||||||
uint32_t WRPSector2; /*!< WRPSector2 : This bitfield specifies the sector(s) upper Sector31 which are write protected.
|
|
||||||
This parameter can be a combination of @ref FLASHEx_Option_Bytes_Write_Protection2 */
|
|
||||||
#endif
|
|
||||||
|
|
||||||
uint8_t RDPLevel; /*!< RDPLevel: Set the read protection level.
|
|
||||||
This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */
|
|
||||||
|
|
||||||
uint8_t BORLevel; /*!< BORLevel: Set the BOR Level.
|
|
||||||
This parameter can be a value of @ref FLASHEx_Option_Bytes_BOR_Level */
|
|
||||||
|
|
||||||
uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.
|
|
||||||
This parameter can be a combination of @ref FLASHEx_Option_Bytes_IWatchdog,
|
|
||||||
@ref FLASHEx_Option_Bytes_nRST_STOP and @ref FLASHEx_Option_Bytes_nRST_STDBY*/
|
|
||||||
|
|
||||||
uint8_t BOOTBit1Config; /*!< BOOT1Config: Together with input pad Boot0, this bit selects the boot source, flash, ram or system memory
|
|
||||||
This parameter can be a value of @ref FLASHEx_Option_Bytes_BOOTBit1 */
|
|
||||||
} FLASH_OBProgramInitTypeDef;
|
|
||||||
|
|
||||||
#if defined(FLASH_OPTR_WPRMOD) || defined(FLASH_OPTR_BFB2)
|
|
||||||
/**
|
|
||||||
* @brief FLASH Advanced Option Bytes Program structure definition
|
|
||||||
*/
|
|
||||||
typedef struct
|
|
||||||
{
|
|
||||||
uint32_t OptionType; /*!< OptionType: Option byte to be configured for extension .
|
|
||||||
This parameter can be a value of @ref FLASHEx_OptionAdv_Type */
|
|
||||||
|
|
||||||
#if defined(FLASH_OPTR_WPRMOD)
|
|
||||||
uint32_t PCROPState; /*!< PCROPState: PCROP activation or deactivation.
|
|
||||||
This parameter can be a value of @ref FLASHEx_PCROP_State */
|
|
||||||
|
|
||||||
uint32_t PCROPSector; /*!< PCROPSector : This bitfield specifies the sector(s) which are read/write protected.
|
|
||||||
This parameter can be a combination of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
|
|
||||||
|
|
||||||
#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
|
|
||||||
uint32_t PCROPSector2; /*!< PCROPSector : This bitfield specifies the sector(s) upper Sector31 which are read/write protected.
|
|
||||||
This parameter can be a combination of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection2 */
|
|
||||||
#endif /* STM32L071xx || STM32L072xx || STM32L073xx || STM32L081xx || STM32L082xx || STM32L083xx */
|
|
||||||
#endif /* FLASH_OPTR_WPRMOD */
|
|
||||||
|
|
||||||
#if defined(FLASH_OPTR_BFB2)
|
|
||||||
uint16_t BootConfig; /*!< BootConfig: specifies Option bytes for boot config
|
|
||||||
This parameter can be a value of @ref FLASHEx_Option_Bytes_BOOT */
|
|
||||||
#endif /* FLASH_OPTR_BFB2*/
|
|
||||||
} FLASH_AdvOBProgramInitTypeDef;
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
#endif /* FLASH_OPTR_WPRMOD || FLASH_OPTR_BFB2 */
|
|
||||||
|
|
||||||
/* Exported constants --------------------------------------------------------*/
|
|
||||||
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_Type_Erase FLASHEx_Type_Erase
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define FLASH_TYPEERASE_PAGES (0x00U) /*!<Page erase only*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_Option_Type FLASHEx Option Type
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define OPTIONBYTE_WRP (0x01U) /*!<WRP option byte configuration*/
|
|
||||||
#define OPTIONBYTE_RDP (0x02U) /*!<RDP option byte configuration*/
|
|
||||||
#define OPTIONBYTE_USER (0x04U) /*!<USER option byte configuration*/
|
|
||||||
#define OPTIONBYTE_BOR (0x08U) /*!<BOR option byte configuration*/
|
|
||||||
#define OPTIONBYTE_BOOT_BIT1 (0x10U) /*!< BOOT PIN1 option byte configuration*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_WRP_State FLASHEx WRP State
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define OB_WRPSTATE_DISABLE (0x00U) /*!<Disable the write protection of the desired sectors*/
|
|
||||||
#define OB_WRPSTATE_ENABLE (0x01U) /*!<Enable the write protection of the desired sectors*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#if defined (STM32L011xx) || defined (STM32L021xx) || defined (STM32L031xx) || defined (STM32L041xx)
|
|
||||||
/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define OB_WRP_Pages0to31 (0x00000001U) /* Write protection of Sector0 */
|
|
||||||
#define OB_WRP_Pages32to63 (0x00000002U) /* Write protection of Sector1 */
|
|
||||||
#define OB_WRP_Pages64to95 (0x00000004U) /* Write protection of Sector2 */
|
|
||||||
#define OB_WRP_Pages96to127 (0x00000008U) /* Write protection of Sector3 */
|
|
||||||
#define OB_WRP_Pages128to159 (0x00000010U) /* Write protection of Sector4 */
|
|
||||||
#define OB_WRP_Pages160to191 (0x00000020U) /* Write protection of Sector5 */
|
|
||||||
#define OB_WRP_Pages192to223 (0x00000040U) /* Write protection of Sector6 */
|
|
||||||
#define OB_WRP_Pages224to255 (0x00000080U) /* Write protection of Sector7 */
|
|
||||||
#define OB_WRP_AllPages (0x000000FFU) /*!< Write protection of all Sectors */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
#elif defined (STM32L051xx) || defined (STM32L052xx) || defined (STM32L053xx) || defined (STM32L062xx) || defined (STM32L063xx)
|
|
||||||
/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define OB_WRP_Pages0to31 (0x00000001U) /* Write protection of Sector0 */
|
|
||||||
#define OB_WRP_Pages32to63 (0x00000002U) /* Write protection of Sector1 */
|
|
||||||
#define OB_WRP_Pages64to95 (0x00000004U) /* Write protection of Sector2 */
|
|
||||||
#define OB_WRP_Pages96to127 (0x00000008U) /* Write protection of Sector3 */
|
|
||||||
#define OB_WRP_Pages128to159 (0x00000010U) /* Write protection of Sector4 */
|
|
||||||
#define OB_WRP_Pages160to191 (0x00000020U) /* Write protection of Sector5 */
|
|
||||||
#define OB_WRP_Pages192to223 (0x00000040U) /* Write protection of Sector6 */
|
|
||||||
#define OB_WRP_Pages224to255 (0x00000080U) /* Write protection of Sector7 */
|
|
||||||
#define OB_WRP_Pages256to287 (0x00000100U) /* Write protection of Sector8 */
|
|
||||||
#define OB_WRP_Pages288to319 (0x00000200U) /* Write protection of Sector9 */
|
|
||||||
#define OB_WRP_Pages320to351 (0x00000400U) /* Write protection of Sector10 */
|
|
||||||
#define OB_WRP_Pages352to383 (0x00000800U) /* Write protection of Sector11 */
|
|
||||||
#define OB_WRP_Pages384to415 (0x00001000U) /* Write protection of Sector12 */
|
|
||||||
#define OB_WRP_Pages416to447 (0x00002000U) /* Write protection of Sector13 */
|
|
||||||
#define OB_WRP_Pages448to479 (0x00004000U) /* Write protection of Sector14 */
|
|
||||||
#define OB_WRP_Pages480to511 (0x00008000U) /* Write protection of Sector15 */
|
|
||||||
#define OB_WRP_AllPages (0x0000FFFFU) /*!< Write protection of all Sectors */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#elif defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
|
|
||||||
/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write ProtectionP
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define OB_WRP_Pages0to31 (0x00000001U) /* Write protection of Sector0 */
|
|
||||||
#define OB_WRP_Pages32to63 (0x00000002U) /* Write protection of Sector1 */
|
|
||||||
#define OB_WRP_Pages64to95 (0x00000004U) /* Write protection of Sector2 */
|
|
||||||
#define OB_WRP_Pages96to127 (0x00000008U) /* Write protection of Sector3 */
|
|
||||||
#define OB_WRP_Pages128to159 (0x00000010U) /* Write protection of Sector4 */
|
|
||||||
#define OB_WRP_Pages160to191 (0x00000020U) /* Write protection of Sector5 */
|
|
||||||
#define OB_WRP_Pages192to223 (0x00000040U) /* Write protection of Sector6 */
|
|
||||||
#define OB_WRP_Pages224to255 (0x00000080U) /* Write protection of Sector7 */
|
|
||||||
#define OB_WRP_Pages256to287 (0x00000100U) /* Write protection of Sector8 */
|
|
||||||
#define OB_WRP_Pages288to319 (0x00000200U) /* Write protection of Sector9 */
|
|
||||||
#define OB_WRP_Pages320to351 (0x00000400U) /* Write protection of Sector10 */
|
|
||||||
#define OB_WRP_Pages352to383 (0x00000800U) /* Write protection of Sector11 */
|
|
||||||
#define OB_WRP_Pages384to415 (0x00001000U) /* Write protection of Sector12 */
|
|
||||||
#define OB_WRP_Pages416to447 (0x00002000U) /* Write protection of Sector13 */
|
|
||||||
#define OB_WRP_Pages448to479 (0x00004000U) /* Write protection of Sector14 */
|
|
||||||
#define OB_WRP_Pages480to511 (0x00008000U) /* Write protection of Sector15 */
|
|
||||||
#define OB_WRP_Pages512to543 (0x00010000U) /* Write protection of Sector16 */
|
|
||||||
#define OB_WRP_Pages544to575 (0x00020000U) /* Write protection of Sector17 */
|
|
||||||
#define OB_WRP_Pages576to607 (0x00040000U) /* Write protection of Sector18 */
|
|
||||||
#define OB_WRP_Pages608to639 (0x00080000U) /* Write protection of Sector19 */
|
|
||||||
#define OB_WRP_Pages640to671 (0x00100000U) /* Write protection of Sector20 */
|
|
||||||
#define OB_WRP_Pages672to703 (0x00200000U) /* Write protection of Sector21 */
|
|
||||||
#define OB_WRP_Pages704to735 (0x00400000U) /* Write protection of Sector22 */
|
|
||||||
#define OB_WRP_Pages736to767 (0x00800000U) /* Write protection of Sector23 */
|
|
||||||
#define OB_WRP_Pages768to799 (0x01000000U) /* Write protection of Sector24 */
|
|
||||||
#define OB_WRP_Pages800to831 (0x02000000U) /* Write protection of Sector25 */
|
|
||||||
#define OB_WRP_Pages832to863 (0x04000000U) /* Write protection of Sector26 */
|
|
||||||
#define OB_WRP_Pages864to895 (0x08000000U) /* Write protection of Sector27 */
|
|
||||||
#define OB_WRP_Pages896to927 (0x10000000U) /* Write protection of Sector28 */
|
|
||||||
#define OB_WRP_Pages928to959 (0x20000000U) /* Write protection of Sector29 */
|
|
||||||
#define OB_WRP_Pages960to991 (0x40000000U) /* Write protection of Sector30 */
|
|
||||||
#define OB_WRP_Pages992to1023 (0x80000000U) /* Write protection of Sector31 */
|
|
||||||
#define OB_WRP_AllPages (0xFFFFFFFFU) /*!<Write protection of all Sectors */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_Option_Bytes_Write_Protection2 FLASH Option Bytes Write Protection
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define OB_WRP2_Pages1024to1055 (0x00000001U) /* Write protection of Sector32 */
|
|
||||||
#define OB_WRP2_Pages1056to1087 (0x00000002U) /* Write protection of Sector33 */
|
|
||||||
#define OB_WRP2_Pages1088to1119 (0x00000004U) /* Write protection of Sector34 */
|
|
||||||
#define OB_WRP2_Pages1120to1151 (0x00000008U) /* Write protection of Sector35 */
|
|
||||||
#define OB_WRP2_Pages1152to1183 (0x00000010U) /* Write protection of Sector36 */
|
|
||||||
#define OB_WRP2_Pages1184to1215 (0x00000020U) /* Write protection of Sector37 */
|
|
||||||
#define OB_WRP2_Pages1216to1247 (0x00000040U) /* Write protection of Sector38 */
|
|
||||||
#define OB_WRP2_Pages1248to1279 (0x00000080U) /* Write protection of Sector39 */
|
|
||||||
#define OB_WRP2_Pages1280to1311 (0x00000100U) /* Write protection of Sector40 */
|
|
||||||
#define OB_WRP2_Pages1312to1343 (0x00000200U) /* Write protection of Sector41 */
|
|
||||||
#define OB_WRP2_Pages1344to1375 (0x00000400U) /* Write protection of Sector42 */
|
|
||||||
#define OB_WRP2_Pages1376to1407 (0x00000800U) /* Write protection of Sector43 */
|
|
||||||
#define OB_WRP2_Pages1408to1439 (0x00001000U) /* Write protection of Sector44 */
|
|
||||||
#define OB_WRP2_Pages1440to1471 (0x00002000U) /* Write protection of Sector45 */
|
|
||||||
#define OB_WRP2_Pages1472to1503 (0x00004000U) /* Write protection of Sector46 */
|
|
||||||
#define OB_WRP2_Pages1504to1535 (0x00008000U) /* Write protection of Sector47 */
|
|
||||||
#define OB_WRP2_AllPages (0x0000FFFFU) /*!< Write protection of all Sectors WRP2 */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
#endif /* STM32L071xx || STM32L072xx || (STM32L073xx) || (STM32L081xx) || (STM32L082xx) || (STM32L083xx) */
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASHEx Option Bytes Read Protection
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define OB_RDP_LEVEL_0 ((uint8_t)0xAA)
|
|
||||||
#define OB_RDP_LEVEL_1 ((uint8_t)0xBB)
|
|
||||||
#define OB_RDP_LEVEL_2 ((uint8_t)0xCC) /* Warning: When enabling read protection level 2
|
|
||||||
it is no more possible to go back to level 1 or 0 */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_Option_Bytes_BOR_Level FLASHEx Option Bytes BOR Level
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define OB_BOR_OFF ((uint8_t)0x00) /*!< BOR is disabled at power down, the reset is asserted when the VDD
|
|
||||||
power supply reaches the PDR(Power Down Reset) threshold (1.5V) */
|
|
||||||
#define OB_BOR_LEVEL1 ((uint8_t)0x08) /*!< BOR Reset threshold levels for 1.7V - 1.8V VDD power supply */
|
|
||||||
#define OB_BOR_LEVEL2 ((uint8_t)0x09) /*!< BOR Reset threshold levels for 1.9V - 2.0V VDD power supply */
|
|
||||||
#define OB_BOR_LEVEL3 ((uint8_t)0x0A) /*!< BOR Reset threshold levels for 2.3V - 2.4V VDD power supply */
|
|
||||||
#define OB_BOR_LEVEL4 ((uint8_t)0x0B) /*!< BOR Reset threshold levels for 2.55V - 2.65V VDD power supply */
|
|
||||||
#define OB_BOR_LEVEL5 ((uint8_t)0x0C) /*!< BOR Reset threshold levels for 2.8V - 2.9V VDD power supply */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASHEx Option Bytes IWatchdog
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define OB_IWDG_SW ((uint8_t)0x10) /*!< Software WDG selected */
|
|
||||||
#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware WDG selected */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASHEx Option Bytes nRST_STOP
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define OB_STOP_NORST ((uint8_t)0x20) /*!< No reset generated when entering in STOP */
|
|
||||||
#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASHEx Option Bytes nRST_STDBY
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define OB_STDBY_NORST ((uint8_t)0x40) /*!< No reset generated when entering in STANDBY */
|
|
||||||
#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#if defined(FLASH_OPTR_WPRMOD)
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_OptionAdv_Type FLASHEx Option Advanced Type
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define OPTIONBYTE_PCROP (0x01U) /*!<PCROP option byte configuration*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#endif /* FLASH_OPTR_WPRMOD */
|
|
||||||
|
|
||||||
#if defined(FLASH_OPTR_BFB2)
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_OptionAdv_Type FLASHEx Option Advanced Type
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define OPTIONBYTE_BOOTCONFIG (0x02U) /*!<BOOTConfig option byte configuration*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#endif /* FLASH_OPTR_BFB2 */
|
|
||||||
|
|
||||||
#if defined(FLASH_OPTR_WPRMOD)
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_PCROP_State FLASHEx PCROP State
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define OB_PCROP_STATE_DISABLE (0x00U) /*!<Disable PCROP for selected sectors */
|
|
||||||
#define OB_PCROP_STATE_ENABLE (0x01U) /*!<Enable PCROP for selected sectors */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_Selection_Protection_Mode FLASHEx Selection Protection Mode
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define OB_PCROP_DESELECTED ((uint16_t)0x0000) /*!< Disabled PCROP, nWPRi bits used for Write Protection on sector i */
|
|
||||||
#define OB_PCROP_SELECTED ((uint16_t)FLASH_OPTR_WPRMOD) /*!< Enable PCROP, nWPRi bits used for PCRoP Protection on sector i */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
#endif /* FLASH_OPTR_WPRMOD */
|
|
||||||
|
|
||||||
#if defined (STM32L011xx) || defined (STM32L021xx) || defined (STM32L031xx) || defined (STM32L041xx)
|
|
||||||
/** @defgroup FLASHEx_Option_Bytes_PC_ReadWrite_Protection FLASHEx Option Bytes PC Read/Write Protection
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define OB_PCROP_Pages0to31 (0x00000001U) /* PC Read/Write protection of Sector0 */
|
|
||||||
#define OB_PCROP_Pages32to63 (0x00000002U) /* PC Read/Write protection of Sector1 */
|
|
||||||
#define OB_PCROP_Pages64to95 (0x00000004U) /* PC Read/Write protection of Sector2 */
|
|
||||||
#define OB_PCROP_Pages96to127 (0x00000008U) /* PC Read/Write protection of Sector3 */
|
|
||||||
#define OB_PCROP_Pages128to159 (0x00000010U) /* PC Read/Write protection of Sector4 */
|
|
||||||
#define OB_PCROP_Pages160to191 (0x00000020U) /* PC Read/Write protection of Sector5 */
|
|
||||||
#define OB_PCROP_Pages192to223 (0x00000040U) /* PC Read/Write protection of Sector6 */
|
|
||||||
#define OB_PCROP_Pages224to255 (0x00000080U) /* PC Read/Write protection of Sector7 */
|
|
||||||
#define OB_PCROP_AllPages (0x000000FFU) /*!< PC Read/Write protection of all Sectors */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
#elif defined (STM32L051xx) || defined (STM32L052xx) || defined (STM32L053xx) || defined (STM32L062xx) || defined (STM32L063xx)
|
|
||||||
/** @defgroup FLASHEx_Option_Bytes_PC_ReadWrite_Protection FLASHEx Option Bytes PC Read/Write Protection
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define OB_PCROP_Pages0to31 (0x00000001U) /* PC Read/Write protection of Sector0 */
|
|
||||||
#define OB_PCROP_Pages32to63 (0x00000002U) /* PC Read/Write protection of Sector1 */
|
|
||||||
#define OB_PCROP_Pages64to95 (0x00000004U) /* PC Read/Write protection of Sector2 */
|
|
||||||
#define OB_PCROP_Pages96to127 (0x00000008U) /* PC Read/Write protection of Sector3 */
|
|
||||||
#define OB_PCROP_Pages128to159 (0x00000010U) /* PC Read/Write protection of Sector4 */
|
|
||||||
#define OB_PCROP_Pages160to191 (0x00000020U) /* PC Read/Write protection of Sector5 */
|
|
||||||
#define OB_PCROP_Pages192to223 (0x00000040U) /* PC Read/Write protection of Sector6 */
|
|
||||||
#define OB_PCROP_Pages224to255 (0x00000080U) /* PC Read/Write protection of Sector7 */
|
|
||||||
#define OB_PCROP_Pages256to287 (0x00000100U) /* PC Read/Write protection of Sector8 */
|
|
||||||
#define OB_PCROP_Pages288to319 (0x00000200U) /* PC Read/Write protection of Sector9 */
|
|
||||||
#define OB_PCROP_Pages320to351 (0x00000400U) /* PC Read/Write protection of Sector10 */
|
|
||||||
#define OB_PCROP_Pages352to383 (0x00000800U) /* PC Read/Write protection of Sector11 */
|
|
||||||
#define OB_PCROP_Pages384to415 (0x00001000U) /* PC Read/Write protection of Sector12 */
|
|
||||||
#define OB_PCROP_Pages416to447 (0x00002000U) /* PC Read/Write protection of Sector13 */
|
|
||||||
#define OB_PCROP_Pages448to479 (0x00004000U) /* PC Read/Write protection of Sector14 */
|
|
||||||
#define OB_PCROP_Pages480to511 (0x00008000U) /* PC Read/Write protection of Sector15 */
|
|
||||||
#define OB_PCROP_AllPages (0x0000FFFFU) /*!< PC Read/Write protection of all Sectors */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
|
|
||||||
/** @defgroup FLASHEx_Option_Bytes_PC_ReadWrite_Protection FLASH Option Bytes PC Read/Write Protection
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define OB_PCROP_Pages0to31 (0x00000001U) /* PC Read/Write protection of Sector0 */
|
|
||||||
#define OB_PCROP_Pages32to63 (0x00000002U) /* PC Read/Write protection of Sector1 */
|
|
||||||
#define OB_PCROP_Pages64to95 (0x00000004U) /* PC Read/Write protection of Sector2 */
|
|
||||||
#define OB_PCROP_Pages96to127 (0x00000008U) /* PC Read/Write protection of Sector3 */
|
|
||||||
#define OB_PCROP_Pages128to159 (0x00000010U) /* PC Read/Write protection of Sector4 */
|
|
||||||
#define OB_PCROP_Pages160to191 (0x00000020U) /* PC Read/Write protection of Sector5 */
|
|
||||||
#define OB_PCROP_Pages192to223 (0x00000040U) /* PC Read/Write protection of Sector6 */
|
|
||||||
#define OB_PCROP_Pages224to255 (0x00000080U) /* PC Read/Write protection of Sector7 */
|
|
||||||
#define OB_PCROP_Pages256to287 (0x00000100U) /* PC Read/Write protection of Sector8 */
|
|
||||||
#define OB_PCROP_Pages288to319 (0x00000200U) /* PC Read/Write protection of Sector9 */
|
|
||||||
#define OB_PCROP_Pages320to351 (0x00000400U) /* PC Read/Write protection of Sector10 */
|
|
||||||
#define OB_PCROP_Pages352to383 (0x00000800U) /* PC Read/Write protection of Sector11 */
|
|
||||||
#define OB_PCROP_Pages384to415 (0x00001000U) /* PC Read/Write protection of Sector12 */
|
|
||||||
#define OB_PCROP_Pages416to447 (0x00002000U) /* PC Read/Write protection of Sector13 */
|
|
||||||
#define OB_PCROP_Pages448to479 (0x00004000U) /* PC Read/Write protection of Sector14 */
|
|
||||||
#define OB_PCROP_Pages480to511 (0x00008000U) /* PC Read/Write protection of Sector15 */
|
|
||||||
#define OB_PCROP_Pages512to543 (0x00010000U) /* PC Read/Write protection of Sector16 */
|
|
||||||
#define OB_PCROP_Pages544to575 (0x00020000U) /* PC Read/Write protection of Sector17 */
|
|
||||||
#define OB_PCROP_Pages576to607 (0x00040000U) /* PC Read/Write protection of Sector18 */
|
|
||||||
#define OB_PCROP_Pages608to639 (0x00080000U) /* PC Read/Write protection of Sector19 */
|
|
||||||
#define OB_PCROP_Pages640to671 (0x00100000U) /* PC Read/Write protection of Sector20 */
|
|
||||||
#define OB_PCROP_Pages672to703 (0x00200000U) /* PC Read/Write protection of Sector21 */
|
|
||||||
#define OB_PCROP_Pages704to735 (0x00400000U) /* PC Read/Write protection of Sector22 */
|
|
||||||
#define OB_PCROP_Pages736to767 (0x00800000U) /* PC Read/Write protection of Sector23 */
|
|
||||||
#define OB_PCROP_Pages768to799 (0x01000000U) /* PC Read/Write protection of Sector24 */
|
|
||||||
#define OB_PCROP_Pages800to831 (0x02000000U) /* PC Read/Write protection of Sector25 */
|
|
||||||
#define OB_PCROP_Pages832to863 (0x04000000U) /* PC Read/Write protection of Sector26 */
|
|
||||||
#define OB_PCROP_Pages864to895 (0x08000000U) /* PC Read/Write protection of Sector27 */
|
|
||||||
#define OB_PCROP_Pages896to927 (0x10000000U) /* PC Read/Write protection of Sector28 */
|
|
||||||
#define OB_PCROP_Pages928to959 (0x20000000U) /* PC Read/Write protection of Sector29 */
|
|
||||||
#define OB_PCROP_Pages960to991 (0x40000000U) /* PC Read/Write protection of Sector30 */
|
|
||||||
#define OB_PCROP_Pages992to1023 (0x80000000U) /* PC Read/Write protection of Sector31 */
|
|
||||||
#define OB_PCROP_AllPages (0xFFFFFFFFU) /*!<PC Read/Write protection of all Sectors */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_Option_Bytes_PC_ReadWrite_Protection2 FLASH Option Bytes PC Read/Write Protection (Sector 2)
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define OB_PCROP2_Pages1024to1055 (0x00000001U) /* PC Read/Write protection of Sector32 */
|
|
||||||
#define OB_PCROP2_Pages1056to1087 (0x00000002U) /* PC Read/Write protection of Sector33 */
|
|
||||||
#define OB_PCROP2_Pages1088to1119 (0x00000004U) /* PC Read/Write protection of Sector34 */
|
|
||||||
#define OB_PCROP2_Pages1120to1151 (0x00000008U) /* PC Read/Write protection of Sector35 */
|
|
||||||
#define OB_PCROP2_Pages1152to1183 (0x00000010U) /* PC Read/Write protection of Sector36 */
|
|
||||||
#define OB_PCROP2_Pages1184to1215 (0x00000020U) /* PC Read/Write protection of Sector37 */
|
|
||||||
#define OB_PCROP2_Pages1216to1247 (0x00000040U) /* PC Read/Write protection of Sector38 */
|
|
||||||
#define OB_PCROP2_Pages1248to1279 (0x00000080U) /* PC Read/Write protection of Sector39 */
|
|
||||||
#define OB_PCROP2_Pages1280to1311 (0x00000100U) /* PC Read/Write protection of Sector40 */
|
|
||||||
#define OB_PCROP2_Pages1312to1343 (0x00000200U) /* PC Read/Write protection of Sector41 */
|
|
||||||
#define OB_PCROP2_Pages1344to1375 (0x00000400U) /* PC Read/Write protection of Sector42 */
|
|
||||||
#define OB_PCROP2_Pages1376to1407 (0x00000800U) /* PC Read/Write protection of Sector43 */
|
|
||||||
#define OB_PCROP2_Pages1408to1439 (0x00001000U) /* PC Read/Write protection of Sector44 */
|
|
||||||
#define OB_PCROP2_Pages1440to1471 (0x00002000U) /* PC Read/Write protection of Sector45 */
|
|
||||||
#define OB_PCROP2_Pages1472to1503 (0x00004000U) /* PC Read/Write protection of Sector46 */
|
|
||||||
#define OB_PCROP2_Pages1504to1535 (0x00008000U) /* PC Read/Write protection of Sector47 */
|
|
||||||
#define OB_PCROP2_AllPages (0x0000FFFFU) /*!< PC Read/Write protection of all Sectors PCROP2 */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
#endif /* STM32L071xx || STM32L072xx || STM32L073xx || STM32L081xx || STM32L082xx || STM32L083xx */
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_Option_Bytes_BOOTBit1 FLASH Option Bytes BOOT Bit1 Setup
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define OB_BOOT_BIT1_RESET (uint8_t)(0x00) /*!< BOOT Bit 1 Reset */
|
|
||||||
#define OB_BOOT_BIT1_SET (uint8_t)(0x01) /*!< BOOT Bit 1 Set */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_Type_Program_Data FLASHEx Type Program Data
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define FLASH_TYPEPROGRAMDATA_BYTE (0x00U) /*!<Program byte (8-bit) at a specified address.*/
|
|
||||||
#define FLASH_TYPEPROGRAMDATA_HALFWORD (0x01U) /*!<Program a half-word (16-bit) at a specified address.*/
|
|
||||||
#define FLASH_TYPEPROGRAMDATA_WORD (0x02U) /*!<Program a word (32-bit) at a specified address.*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#if defined(FLASH_OPTR_BFB2)
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_Option_Bytes_BOOT FLASHEx Option Bytes BOOT
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define OB_BOOT_BANK1 ((uint8_t)0x00) /*!< At startup, if boot pin 0 and BOOT1 bit are set in boot from user Flash position
|
|
||||||
and this parameter is selected the device will boot from Bank 1 (Default)*/
|
|
||||||
#define OB_BOOT_BANK2 ((uint8_t)(FLASH_OPTR_BFB2 >> 16)) /*!< At startup, if boot pin 0 and BOOT1 bit are set in boot from user Flash position
|
|
||||||
and this parameter is selected the device will boot from Bank 2 */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
#endif /* FLASH_OPTR_BFB2 */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported macro ------------------------------------------------------------*/
|
|
||||||
|
|
||||||
/** @defgroup FLASHEx_Exported_Macros FLASHEx Exported Macros
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Set the FLASH Latency.
|
|
||||||
* @param __LATENCY__ FLASH Latency
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg @ref FLASH_LATENCY_0 FLASH Zero Latency cycle
|
|
||||||
* @arg @ref FLASH_LATENCY_1 FLASH One Latency cycle
|
|
||||||
* @retval none
|
|
||||||
*/
|
|
||||||
#define __HAL_FLASH_SET_LATENCY(__LATENCY__) \
|
|
||||||
MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(__LATENCY__))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Get the FLASH Latency.
|
|
||||||
* @retval FLASH Latency
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg @ref FLASH_LATENCY_0 FLASH Zero Latency cycle
|
|
||||||
* @arg @ref FLASH_LATENCY_1 FLASH One Latency cycle
|
|
||||||
*/
|
|
||||||
#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enable the FLASH prefetch buffer.
|
|
||||||
* @retval none
|
|
||||||
*/
|
|
||||||
#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() SET_BIT((FLASH->ACR), FLASH_ACR_PRFTEN)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disable the FLASH prefetch buffer.
|
|
||||||
* @retval none
|
|
||||||
*/
|
|
||||||
#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() CLEAR_BIT((FLASH->ACR), FLASH_ACR_PRFTEN)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enable the FLASH Buffer cache.
|
|
||||||
* @retval none
|
|
||||||
*/
|
|
||||||
#define __HAL_FLASH_BUFFER_CACHE_ENABLE() CLEAR_BIT((FLASH->ACR), FLASH_ACR_DISAB_BUF)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disable the FLASH Buffer cache.
|
|
||||||
* @retval none
|
|
||||||
*/
|
|
||||||
#define __HAL_FLASH_BUFFER_CACHE_DISABLE() SET_BIT((FLASH->ACR), FLASH_ACR_DISAB_BUF)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enable the FLASH preread buffer.
|
|
||||||
* @retval none
|
|
||||||
*/
|
|
||||||
#define __HAL_FLASH_PREREAD_BUFFER_ENABLE() SET_BIT((FLASH->ACR), FLASH_ACR_PRE_READ)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disable the FLASH preread buffer.
|
|
||||||
* @retval none
|
|
||||||
*/
|
|
||||||
#define __HAL_FLASH_PREREAD_BUFFER_DISABLE() CLEAR_BIT((FLASH->ACR), FLASH_ACR_PRE_READ)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enable the FLASH power down during Sleep mode
|
|
||||||
* @retval none
|
|
||||||
*/
|
|
||||||
#define __HAL_FLASH_SLEEP_POWERDOWN_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disable the FLASH power down during Sleep mode
|
|
||||||
* @retval none
|
|
||||||
*/
|
|
||||||
#define __HAL_FLASH_SLEEP_POWERDOWN_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enable the Flash Run power down mode.
|
|
||||||
* @note Writing this bit to 0 this bit, automatically the keys are
|
|
||||||
* loss and a new unlock sequence is necessary to re-write it to 1.
|
|
||||||
*/
|
|
||||||
#define __HAL_FLASH_POWER_DOWN_ENABLE() do { FLASH->PDKEYR = FLASH_PDKEY1; \
|
|
||||||
FLASH->PDKEYR = FLASH_PDKEY2; \
|
|
||||||
SET_BIT((FLASH->ACR), FLASH_ACR_RUN_PD); \
|
|
||||||
} while (0)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disable the Flash Run power down mode.
|
|
||||||
* @note Writing this bit to 0 this bit, automatically the keys are
|
|
||||||
* loss and a new unlock sequence is necessary to re-write it to 1.
|
|
||||||
*/
|
|
||||||
#define __HAL_FLASH_POWER_DOWN_DISABLE() do { FLASH->PDKEYR = FLASH_PDKEY1; \
|
|
||||||
FLASH->PDKEYR = FLASH_PDKEY2; \
|
|
||||||
CLEAR_BIT((FLASH->ACR), FLASH_ACR_RUN_PD); \
|
|
||||||
} while (0)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported functions --------------------------------------------------------*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASHEx_Exported_Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASHEx_Exported_Functions_Group1
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError);
|
|
||||||
HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASHEx_Exported_Functions_Group2
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
|
|
||||||
void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
|
|
||||||
|
|
||||||
#if defined(FLASH_OPTR_WPRMOD) || defined(FLASH_OPTR_BFB2)
|
|
||||||
|
|
||||||
HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram (FLASH_AdvOBProgramInitTypeDef *pAdvOBInit);
|
|
||||||
void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit);
|
|
||||||
|
|
||||||
#endif /* FLASH_OPTR_WPRMOD || FLASH_OPTR_BFB2 */
|
|
||||||
|
|
||||||
#if defined(FLASH_OPTR_WPRMOD)
|
|
||||||
|
|
||||||
HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void);
|
|
||||||
HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void);
|
|
||||||
|
|
||||||
#endif /* FLASH_OPTR_WPRMOD */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASHEx_Exported_Functions_Group3
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
HAL_StatusTypeDef HAL_FLASHEx_DATAEEPROM_Unlock(void);
|
|
||||||
HAL_StatusTypeDef HAL_FLASHEx_DATAEEPROM_Lock(void);
|
|
||||||
|
|
||||||
HAL_StatusTypeDef HAL_FLASHEx_DATAEEPROM_Erase(uint32_t Address);
|
|
||||||
HAL_StatusTypeDef HAL_FLASHEx_DATAEEPROM_Program(uint32_t TypeProgram, uint32_t Address, uint32_t Data);
|
|
||||||
void HAL_FLASHEx_DATAEEPROM_EnableFixedTimeProgram(void);
|
|
||||||
void HAL_FLASHEx_DATAEEPROM_DisableFixedTimeProgram(void);
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif /* __STM32L0xx_HAL_FLASH_EX_H */
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
@ -1,108 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_flash_ramfunc.h
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief Header file of FLASH RAMFUNC driver.
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
||||||
#ifndef __STM32L0xx_FLASH_RAMFUNC_H
|
|
||||||
#define __STM32L0xx_FLASH_RAMFUNC_H
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
extern "C" {
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal_def.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASH_RAMFUNC
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported types ------------------------------------------------------------*/
|
|
||||||
|
|
||||||
|
|
||||||
/* Exported functions --------------------------------------------------------*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASH_RAMFUNC_Exported_Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/*
|
|
||||||
* @brief FLASH memory functions that should be executed from internal SRAM.
|
|
||||||
* These functions are defined inside the "stm32l0xx_hal_flash_ramfunc.c"
|
|
||||||
* file.
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group1
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableRunPowerDown(void);
|
|
||||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableRunPowerDown(void);
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group2
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#if defined(FLASH_PECR_PARALLBANK)
|
|
||||||
|
|
||||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EraseParallelPage(uint32_t Page_Address1, uint32_t Page_Address2);
|
|
||||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_ProgramParallelHalfPage(uint32_t Address1, uint32_t* pBuffer1, uint32_t Address2, uint32_t* pBuffer2);
|
|
||||||
|
|
||||||
#endif /* FLASH_PECR_PARALLBANK */
|
|
||||||
|
|
||||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_HalfPageProgram(uint32_t Address, uint32_t* pBuffer);
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group3
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_GetError(uint32_t *Error);
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif /* __STM32L0xx_FLASH_RAMFUNC_H */
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
@ -1,326 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_gpio.h
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief Header file of GPIO HAL module.
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright(c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
||||||
#ifndef __STM32L0xx_HAL_GPIO_H
|
|
||||||
#define __STM32L0xx_HAL_GPIO_H
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
extern "C" {
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal_def.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup GPIO GPIO
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/******************************************************************************/
|
|
||||||
/* Exported types ------------------------------------------------------------*/
|
|
||||||
/******************************************************************************/
|
|
||||||
|
|
||||||
/** @defgroup GPIO_Exported_Types GPIO Exported Types
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup GPIO_Init_Configuration GPIO init configuration structure
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/**
|
|
||||||
* @brief GPIO Init structure definition
|
|
||||||
*/
|
|
||||||
typedef struct
|
|
||||||
{
|
|
||||||
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
|
|
||||||
This parameter can be a combination of @ref GPIO_pins_define */
|
|
||||||
|
|
||||||
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
|
|
||||||
This parameter can be a value of @ref GPIO_mode_define */
|
|
||||||
|
|
||||||
uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
|
|
||||||
This parameter can be a value of @ref GPIO_pull_define */
|
|
||||||
|
|
||||||
uint32_t Speed; /*!< Specifies the speed for the selected pins.
|
|
||||||
This parameter can be a value of @ref GPIO_speed_define */
|
|
||||||
|
|
||||||
uint32_t Alternate; /*!< Peripheral to be connected to the selected pins
|
|
||||||
This parameter can be a value of @ref GPIOEx_Alternate_function_selection */
|
|
||||||
} GPIO_InitTypeDef;
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup GPIO_SetReset_Definition GPIO set reset definition
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/**
|
|
||||||
* @brief GPIO Bit SET and Bit RESET enumeration
|
|
||||||
*/
|
|
||||||
typedef enum
|
|
||||||
{
|
|
||||||
GPIO_PIN_RESET = 0U,
|
|
||||||
GPIO_PIN_SET
|
|
||||||
} GPIO_PinState;
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
#define IS_GPIO_PIN_ACTION(__ACTION__) (((__ACTION__) == GPIO_PIN_RESET) || ((__ACTION__) == GPIO_PIN_SET))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
/******************************************************************************/
|
|
||||||
/* Exported constants --------------------------------------------------------*/
|
|
||||||
/******************************************************************************/
|
|
||||||
|
|
||||||
/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup GPIO_pins_define Pin definition
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define GPIO_PIN_0 (0x0001U) /* Pin 0 selected */
|
|
||||||
#define GPIO_PIN_1 (0x0002U) /* Pin 1 selected */
|
|
||||||
#define GPIO_PIN_2 (0x0004U) /* Pin 2 selected */
|
|
||||||
#define GPIO_PIN_3 (0x0008U) /* Pin 3 selected */
|
|
||||||
#define GPIO_PIN_4 (0x0010U) /* Pin 4 selected */
|
|
||||||
#define GPIO_PIN_5 (0x0020U) /* Pin 5 selected */
|
|
||||||
#define GPIO_PIN_6 (0x0040U) /* Pin 6 selected */
|
|
||||||
#define GPIO_PIN_7 (0x0080U) /* Pin 7 selected */
|
|
||||||
#define GPIO_PIN_8 (0x0100U) /* Pin 8 selected */
|
|
||||||
#define GPIO_PIN_9 (0x0200U) /* Pin 9 selected */
|
|
||||||
#define GPIO_PIN_10 (0x0400U) /* Pin 10 selected */
|
|
||||||
#define GPIO_PIN_11 (0x0800U) /* Pin 11 selected */
|
|
||||||
#define GPIO_PIN_12 (0x1000U) /* Pin 12 selected */
|
|
||||||
#define GPIO_PIN_13 (0x2000U) /* Pin 13 selected */
|
|
||||||
#define GPIO_PIN_14 (0x4000U) /* Pin 14 selected */
|
|
||||||
#define GPIO_PIN_15 (0x8000U) /* Pin 15 selected */
|
|
||||||
#define GPIO_PIN_All (0xFFFFU) /* All pins selected */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define GPIO_PIN_MASK (0x0000FFFFU) /* PIN mask for assert test */
|
|
||||||
#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\
|
|
||||||
(((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00U))
|
|
||||||
|
|
||||||
/** @defgroup GPIO_mode_define Mode definition
|
|
||||||
* @brief GPIO Configuration Mode
|
|
||||||
* Elements values convention: 0xX0yz00YZ
|
|
||||||
* - X : GPIO mode or EXTI Mode
|
|
||||||
* - y : External IT or Event trigger detection
|
|
||||||
* - z : IO configuration on External IT or Event
|
|
||||||
* - Y : Output type (Push Pull or Open Drain)
|
|
||||||
* - Z : IO Direction mode (Input, Output, Alternate or Analog)
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define GPIO_MODE_INPUT (0x00000000U) /*!< Input Floating Mode */
|
|
||||||
#define GPIO_MODE_OUTPUT_PP (0x00000001U) /*!< Output Push Pull Mode */
|
|
||||||
#define GPIO_MODE_OUTPUT_OD (0x00000011U) /*!< Output Open Drain Mode */
|
|
||||||
#define GPIO_MODE_AF_PP (0x00000002U) /*!< Alternate Function Push Pull Mode */
|
|
||||||
#define GPIO_MODE_AF_OD (0x00000012U) /*!< Alternate Function Open Drain Mode */
|
|
||||||
|
|
||||||
#define GPIO_MODE_ANALOG (0x00000003U) /*!< Analog Mode */
|
|
||||||
|
|
||||||
#define GPIO_MODE_IT_RISING (0x10110000U) /*!< External Interrupt Mode with Rising edge trigger detection */
|
|
||||||
#define GPIO_MODE_IT_FALLING (0x10210000U) /*!< External Interrupt Mode with Falling edge trigger detection */
|
|
||||||
#define GPIO_MODE_IT_RISING_FALLING (0x10310000U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
|
||||||
|
|
||||||
#define GPIO_MODE_EVT_RISING (0x10120000U) /*!< External Event Mode with Rising edge trigger detection */
|
|
||||||
#define GPIO_MODE_EVT_FALLING (0x10220000U) /*!< External Event Mode with Falling edge trigger detection */
|
|
||||||
#define GPIO_MODE_EVT_RISING_FALLING (0x10320000U) /*!< External Event Mode with Rising/Falling edge trigger detection */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\
|
|
||||||
((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\
|
|
||||||
((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\
|
|
||||||
((__MODE__) == GPIO_MODE_AF_PP) ||\
|
|
||||||
((__MODE__) == GPIO_MODE_AF_OD) ||\
|
|
||||||
((__MODE__) == GPIO_MODE_IT_RISING) ||\
|
|
||||||
((__MODE__) == GPIO_MODE_IT_FALLING) ||\
|
|
||||||
((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\
|
|
||||||
((__MODE__) == GPIO_MODE_EVT_RISING) ||\
|
|
||||||
((__MODE__) == GPIO_MODE_EVT_FALLING) ||\
|
|
||||||
((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\
|
|
||||||
((__MODE__) == GPIO_MODE_ANALOG))
|
|
||||||
|
|
||||||
|
|
||||||
/** @defgroup GPIO_speed_define Speed definition
|
|
||||||
* @brief GPIO Output Maximum frequency
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< range up to 0.4 MHz, please refer to the product datasheet */
|
|
||||||
#define GPIO_SPEED_FREQ_MEDIUM (0x00000001U) /*!< range 0.4 MHz to 2 MHz, please refer to the product datasheet */
|
|
||||||
#define GPIO_SPEED_FREQ_HIGH (0x00000002U) /*!< range 2 MHz to 10 MHz, please refer to the product datasheet */
|
|
||||||
#define GPIO_SPEED_FREQ_VERY_HIGH (0x00000003U) /*!< range 10 MHz to 35 MHz, please refer to the product datasheet */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW ) || ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM ) || \
|
|
||||||
((__SPEED__) == GPIO_SPEED_FREQ_HIGH ) || ((__SPEED__) == GPIO_SPEED_FREQ_VERY_HIGH))
|
|
||||||
|
|
||||||
|
|
||||||
/** @defgroup GPIO_pull_define Pull definition
|
|
||||||
* @brief GPIO Pull-Up or Pull-Down Activation
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define GPIO_NOPULL (0x00000000U) /*!< No Pull-up or Pull-down activation */
|
|
||||||
#define GPIO_PULLUP (0x00000001U) /*!< Pull-up activation */
|
|
||||||
#define GPIO_PULLDOWN (0x00000002U) /*!< Pull-down activation */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) || ((__PULL__) == GPIO_PULLUP) || \
|
|
||||||
((__PULL__) == GPIO_PULLDOWN))
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
/******************************************************************************/
|
|
||||||
/* Exported macro ------------------------------------------------------------*/
|
|
||||||
/******************************************************************************/
|
|
||||||
/* Exported macro ------------------------------------------------------------*/
|
|
||||||
/** @defgroup GPIO_Exported_Macro GPIO Exported Macros
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/**
|
|
||||||
* @brief Checks whether the specified EXTI line flag is set or not.
|
|
||||||
* @param __EXTI_LINE__ specifies the EXTI line flag to check.
|
|
||||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
|
||||||
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
|
||||||
*/
|
|
||||||
#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Clears the EXTI's line pending flags.
|
|
||||||
* @param __EXTI_LINE__ specifies the EXTI lines flags to clear.
|
|
||||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Checks whether the specified EXTI line is asserted or not.
|
|
||||||
* @param __EXTI_LINE__ specifies the EXTI line to check.
|
|
||||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
|
||||||
* @retval The new state of __EXTI_LINE__ (SET or RESET).
|
|
||||||
*/
|
|
||||||
#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Clears the EXTI's line pending bits.
|
|
||||||
* @param __EXTI_LINE__ specifies the EXTI lines to clear.
|
|
||||||
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Generates a Software interrupt on selected EXTI line.
|
|
||||||
* @param __EXTI_LINE__ specifies the EXTI line to check.
|
|
||||||
* This parameter can be GPIO_PIN_x where x can be(0..15)
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
/* Include GPIO HAL Extension module */
|
|
||||||
#include "stm32l0xx_hal_gpio_ex.h"
|
|
||||||
|
|
||||||
/******************************************************************************/
|
|
||||||
/* Exported functions --------------------------------------------------------*/
|
|
||||||
/******************************************************************************/
|
|
||||||
|
|
||||||
/* Exported functions --------------------------------------------------------*/
|
|
||||||
/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Initialization and de-initialization functions *******************************/
|
|
||||||
/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
|
|
||||||
void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* IO operation functions *******************************************************/
|
|
||||||
/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
|
|
||||||
void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
|
|
||||||
void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
|
|
||||||
HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
|
|
||||||
void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
|
|
||||||
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Define the private group ***********************************/
|
|
||||||
/**************************************************************/
|
|
||||||
/** @defgroup GPIO_Private GPIO Private
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
/**************************************************************/
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif /* __STM32L0xx_HAL_GPIO_H */
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
|
|
||||||
File diff suppressed because it is too large
Load Diff
@ -1,809 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_i2c.h
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief Header file of I2C HAL module.
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
||||||
#ifndef STM32L0xx_HAL_I2C_H
|
|
||||||
#define STM32L0xx_HAL_I2C_H
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
extern "C" {
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal_def.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup I2C
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported types ------------------------------------------------------------*/
|
|
||||||
/** @defgroup I2C_Exported_Types I2C Exported Types
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
|
|
||||||
* @brief I2C Configuration Structure definition
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
typedef struct
|
|
||||||
{
|
|
||||||
uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value.
|
|
||||||
This parameter calculated by referring to I2C initialization
|
|
||||||
section in Reference manual */
|
|
||||||
|
|
||||||
uint32_t OwnAddress1; /*!< Specifies the first device own address.
|
|
||||||
This parameter can be a 7-bit or 10-bit address. */
|
|
||||||
|
|
||||||
uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
|
|
||||||
This parameter can be a value of @ref I2C_ADDRESSING_MODE */
|
|
||||||
|
|
||||||
uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
|
|
||||||
This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */
|
|
||||||
|
|
||||||
uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
|
|
||||||
This parameter can be a 7-bit address. */
|
|
||||||
|
|
||||||
uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected
|
|
||||||
This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */
|
|
||||||
|
|
||||||
uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
|
|
||||||
This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */
|
|
||||||
|
|
||||||
uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
|
|
||||||
This parameter can be a value of @ref I2C_NOSTRETCH_MODE */
|
|
||||||
|
|
||||||
} I2C_InitTypeDef;
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup HAL_state_structure_definition HAL state structure definition
|
|
||||||
* @brief HAL State structure definition
|
|
||||||
* @note HAL I2C State value coding follow below described bitmap :\n
|
|
||||||
* b7-b6 Error information\n
|
|
||||||
* 00 : No Error\n
|
|
||||||
* 01 : Abort (Abort user request on going)\n
|
|
||||||
* 10 : Timeout\n
|
|
||||||
* 11 : Error\n
|
|
||||||
* b5 Peripheral initialization status\n
|
|
||||||
* 0 : Reset (peripheral not initialized)\n
|
|
||||||
* 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n
|
|
||||||
* b4 (not used)\n
|
|
||||||
* x : Should be set to 0\n
|
|
||||||
* b3\n
|
|
||||||
* 0 : Ready or Busy (No Listen mode ongoing)\n
|
|
||||||
* 1 : Listen (peripheral in Address Listen Mode)\n
|
|
||||||
* b2 Intrinsic process state\n
|
|
||||||
* 0 : Ready\n
|
|
||||||
* 1 : Busy (peripheral busy with some configuration or internal operations)\n
|
|
||||||
* b1 Rx state\n
|
|
||||||
* 0 : Ready (no Rx operation ongoing)\n
|
|
||||||
* 1 : Busy (Rx operation ongoing)\n
|
|
||||||
* b0 Tx state\n
|
|
||||||
* 0 : Ready (no Tx operation ongoing)\n
|
|
||||||
* 1 : Busy (Tx operation ongoing)
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
typedef enum
|
|
||||||
{
|
|
||||||
HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
|
|
||||||
HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
|
|
||||||
HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
|
|
||||||
HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
|
|
||||||
HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
|
|
||||||
HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
|
|
||||||
HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
|
|
||||||
process is ongoing */
|
|
||||||
HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
|
|
||||||
process is ongoing */
|
|
||||||
HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
|
|
||||||
HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
|
|
||||||
HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */
|
|
||||||
|
|
||||||
} HAL_I2C_StateTypeDef;
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup HAL_mode_structure_definition HAL mode structure definition
|
|
||||||
* @brief HAL Mode structure definition
|
|
||||||
* @note HAL I2C Mode value coding follow below described bitmap :\n
|
|
||||||
* b7 (not used)\n
|
|
||||||
* x : Should be set to 0\n
|
|
||||||
* b6\n
|
|
||||||
* 0 : None\n
|
|
||||||
* 1 : Memory (HAL I2C communication is in Memory Mode)\n
|
|
||||||
* b5\n
|
|
||||||
* 0 : None\n
|
|
||||||
* 1 : Slave (HAL I2C communication is in Slave Mode)\n
|
|
||||||
* b4\n
|
|
||||||
* 0 : None\n
|
|
||||||
* 1 : Master (HAL I2C communication is in Master Mode)\n
|
|
||||||
* b3-b2-b1-b0 (not used)\n
|
|
||||||
* xxxx : Should be set to 0000
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
typedef enum
|
|
||||||
{
|
|
||||||
HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */
|
|
||||||
HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */
|
|
||||||
HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */
|
|
||||||
HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */
|
|
||||||
|
|
||||||
} HAL_I2C_ModeTypeDef;
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup I2C_Error_Code_definition I2C Error Code definition
|
|
||||||
* @brief I2C Error Code definition
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */
|
|
||||||
#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */
|
|
||||||
#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */
|
|
||||||
#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */
|
|
||||||
#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */
|
|
||||||
#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
|
|
||||||
#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */
|
|
||||||
#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */
|
|
||||||
#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */
|
|
||||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
||||||
#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */
|
|
||||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
||||||
#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
|
|
||||||
* @brief I2C handle Structure definition
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
typedef struct __I2C_HandleTypeDef
|
|
||||||
{
|
|
||||||
I2C_TypeDef *Instance; /*!< I2C registers base address */
|
|
||||||
|
|
||||||
I2C_InitTypeDef Init; /*!< I2C communication parameters */
|
|
||||||
|
|
||||||
uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
|
|
||||||
|
|
||||||
uint16_t XferSize; /*!< I2C transfer size */
|
|
||||||
|
|
||||||
__IO uint16_t XferCount; /*!< I2C transfer counter */
|
|
||||||
|
|
||||||
__IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can
|
|
||||||
be a value of @ref I2C_XFEROPTIONS */
|
|
||||||
|
|
||||||
__IO uint32_t PreviousState; /*!< I2C communication Previous state */
|
|
||||||
|
|
||||||
HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); /*!< I2C transfer IRQ handler function pointer */
|
|
||||||
|
|
||||||
DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
|
|
||||||
|
|
||||||
DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
|
|
||||||
|
|
||||||
HAL_LockTypeDef Lock; /*!< I2C locking object */
|
|
||||||
|
|
||||||
__IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
|
|
||||||
|
|
||||||
__IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */
|
|
||||||
|
|
||||||
__IO uint32_t ErrorCode; /*!< I2C Error code */
|
|
||||||
|
|
||||||
__IO uint32_t AddrEventCount; /*!< I2C Address Event counter */
|
|
||||||
|
|
||||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
||||||
void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Tx Transfer completed callback */
|
|
||||||
void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Rx Transfer completed callback */
|
|
||||||
void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Tx Transfer completed callback */
|
|
||||||
void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Rx Transfer completed callback */
|
|
||||||
void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Listen Complete callback */
|
|
||||||
void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Tx Transfer completed callback */
|
|
||||||
void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Rx Transfer completed callback */
|
|
||||||
void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Error callback */
|
|
||||||
void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Abort callback */
|
|
||||||
|
|
||||||
void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< I2C Slave Address Match callback */
|
|
||||||
|
|
||||||
void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp Init callback */
|
|
||||||
void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp DeInit callback */
|
|
||||||
|
|
||||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
||||||
} I2C_HandleTypeDef;
|
|
||||||
|
|
||||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
||||||
/**
|
|
||||||
* @brief HAL I2C Callback ID enumeration definition
|
|
||||||
*/
|
|
||||||
typedef enum
|
|
||||||
{
|
|
||||||
HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */
|
|
||||||
HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */
|
|
||||||
HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */
|
|
||||||
HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */
|
|
||||||
HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */
|
|
||||||
HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */
|
|
||||||
HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */
|
|
||||||
HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */
|
|
||||||
HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */
|
|
||||||
|
|
||||||
HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */
|
|
||||||
HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */
|
|
||||||
|
|
||||||
} HAL_I2C_CallbackIDTypeDef;
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief HAL I2C Callback pointer definition
|
|
||||||
*/
|
|
||||||
typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */
|
|
||||||
typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */
|
|
||||||
|
|
||||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
/* Exported constants --------------------------------------------------------*/
|
|
||||||
|
|
||||||
/** @defgroup I2C_Exported_Constants I2C Exported Constants
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE)
|
|
||||||
#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
|
|
||||||
#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
|
|
||||||
#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
|
|
||||||
#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
|
|
||||||
#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE)
|
|
||||||
|
|
||||||
/* List of XferOptions in usage of :
|
|
||||||
* 1- Restart condition in all use cases (direction change or not)
|
|
||||||
*/
|
|
||||||
#define I2C_OTHER_FRAME (0x000000AAU)
|
|
||||||
#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define I2C_ADDRESSINGMODE_7BIT (0x00000001U)
|
|
||||||
#define I2C_ADDRESSINGMODE_10BIT (0x00000002U)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define I2C_DUALADDRESS_DISABLE (0x00000000U)
|
|
||||||
#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define I2C_OA2_NOMASK ((uint8_t)0x00U)
|
|
||||||
#define I2C_OA2_MASK01 ((uint8_t)0x01U)
|
|
||||||
#define I2C_OA2_MASK02 ((uint8_t)0x02U)
|
|
||||||
#define I2C_OA2_MASK03 ((uint8_t)0x03U)
|
|
||||||
#define I2C_OA2_MASK04 ((uint8_t)0x04U)
|
|
||||||
#define I2C_OA2_MASK05 ((uint8_t)0x05U)
|
|
||||||
#define I2C_OA2_MASK06 ((uint8_t)0x06U)
|
|
||||||
#define I2C_OA2_MASK07 ((uint8_t)0x07U)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define I2C_GENERALCALL_DISABLE (0x00000000U)
|
|
||||||
#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define I2C_NOSTRETCH_DISABLE (0x00000000U)
|
|
||||||
#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define I2C_MEMADD_SIZE_8BIT (0x00000001U)
|
|
||||||
#define I2C_MEMADD_SIZE_16BIT (0x00000002U)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define I2C_DIRECTION_TRANSMIT (0x00000000U)
|
|
||||||
#define I2C_DIRECTION_RECEIVE (0x00000001U)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define I2C_RELOAD_MODE I2C_CR2_RELOAD
|
|
||||||
#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND
|
|
||||||
#define I2C_SOFTEND_MODE (0x00000000U)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define I2C_NO_STARTSTOP (0x00000000U)
|
|
||||||
#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP)
|
|
||||||
#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)
|
|
||||||
#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
|
|
||||||
* @brief I2C Interrupt definition
|
|
||||||
* Elements values convention: 0xXXXXXXXX
|
|
||||||
* - XXXXXXXX : Interrupt control mask
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define I2C_IT_ERRI I2C_CR1_ERRIE
|
|
||||||
#define I2C_IT_TCI I2C_CR1_TCIE
|
|
||||||
#define I2C_IT_STOPI I2C_CR1_STOPIE
|
|
||||||
#define I2C_IT_NACKI I2C_CR1_NACKIE
|
|
||||||
#define I2C_IT_ADDRI I2C_CR1_ADDRIE
|
|
||||||
#define I2C_IT_RXI I2C_CR1_RXIE
|
|
||||||
#define I2C_IT_TXI I2C_CR1_TXIE
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup I2C_Flag_definition I2C Flag definition
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define I2C_FLAG_TXE I2C_ISR_TXE
|
|
||||||
#define I2C_FLAG_TXIS I2C_ISR_TXIS
|
|
||||||
#define I2C_FLAG_RXNE I2C_ISR_RXNE
|
|
||||||
#define I2C_FLAG_ADDR I2C_ISR_ADDR
|
|
||||||
#define I2C_FLAG_AF I2C_ISR_NACKF
|
|
||||||
#define I2C_FLAG_STOPF I2C_ISR_STOPF
|
|
||||||
#define I2C_FLAG_TC I2C_ISR_TC
|
|
||||||
#define I2C_FLAG_TCR I2C_ISR_TCR
|
|
||||||
#define I2C_FLAG_BERR I2C_ISR_BERR
|
|
||||||
#define I2C_FLAG_ARLO I2C_ISR_ARLO
|
|
||||||
#define I2C_FLAG_OVR I2C_ISR_OVR
|
|
||||||
#define I2C_FLAG_PECERR I2C_ISR_PECERR
|
|
||||||
#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT
|
|
||||||
#define I2C_FLAG_ALERT I2C_ISR_ALERT
|
|
||||||
#define I2C_FLAG_BUSY I2C_ISR_BUSY
|
|
||||||
#define I2C_FLAG_DIR I2C_ISR_DIR
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported macros -----------------------------------------------------------*/
|
|
||||||
|
|
||||||
/** @defgroup I2C_Exported_Macros I2C Exported Macros
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @brief Reset I2C handle state.
|
|
||||||
* @param __HANDLE__ specifies the I2C Handle.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
||||||
#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \
|
|
||||||
(__HANDLE__)->State = HAL_I2C_STATE_RESET; \
|
|
||||||
(__HANDLE__)->MspInitCallback = NULL; \
|
|
||||||
(__HANDLE__)->MspDeInitCallback = NULL; \
|
|
||||||
} while(0)
|
|
||||||
#else
|
|
||||||
#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/** @brief Enable the specified I2C interrupt.
|
|
||||||
* @param __HANDLE__ specifies the I2C Handle.
|
|
||||||
* @param __INTERRUPT__ specifies the interrupt source to enable.
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg @ref I2C_IT_ERRI Errors interrupt enable
|
|
||||||
* @arg @ref I2C_IT_TCI Transfer complete interrupt enable
|
|
||||||
* @arg @ref I2C_IT_STOPI STOP detection interrupt enable
|
|
||||||
* @arg @ref I2C_IT_NACKI NACK received interrupt enable
|
|
||||||
* @arg @ref I2C_IT_ADDRI Address match interrupt enable
|
|
||||||
* @arg @ref I2C_IT_RXI RX interrupt enable
|
|
||||||
* @arg @ref I2C_IT_TXI TX interrupt enable
|
|
||||||
*
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
|
|
||||||
|
|
||||||
/** @brief Disable the specified I2C interrupt.
|
|
||||||
* @param __HANDLE__ specifies the I2C Handle.
|
|
||||||
* @param __INTERRUPT__ specifies the interrupt source to disable.
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg @ref I2C_IT_ERRI Errors interrupt enable
|
|
||||||
* @arg @ref I2C_IT_TCI Transfer complete interrupt enable
|
|
||||||
* @arg @ref I2C_IT_STOPI STOP detection interrupt enable
|
|
||||||
* @arg @ref I2C_IT_NACKI NACK received interrupt enable
|
|
||||||
* @arg @ref I2C_IT_ADDRI Address match interrupt enable
|
|
||||||
* @arg @ref I2C_IT_RXI RX interrupt enable
|
|
||||||
* @arg @ref I2C_IT_TXI TX interrupt enable
|
|
||||||
*
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
|
|
||||||
|
|
||||||
/** @brief Check whether the specified I2C interrupt source is enabled or not.
|
|
||||||
* @param __HANDLE__ specifies the I2C Handle.
|
|
||||||
* @param __INTERRUPT__ specifies the I2C interrupt source to check.
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg @ref I2C_IT_ERRI Errors interrupt enable
|
|
||||||
* @arg @ref I2C_IT_TCI Transfer complete interrupt enable
|
|
||||||
* @arg @ref I2C_IT_STOPI STOP detection interrupt enable
|
|
||||||
* @arg @ref I2C_IT_NACKI NACK received interrupt enable
|
|
||||||
* @arg @ref I2C_IT_ADDRI Address match interrupt enable
|
|
||||||
* @arg @ref I2C_IT_RXI RX interrupt enable
|
|
||||||
* @arg @ref I2C_IT_TXI TX interrupt enable
|
|
||||||
*
|
|
||||||
* @retval The new state of __INTERRUPT__ (SET or RESET).
|
|
||||||
*/
|
|
||||||
#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & \
|
|
||||||
(__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
|
|
||||||
|
|
||||||
/** @brief Check whether the specified I2C flag is set or not.
|
|
||||||
* @param __HANDLE__ specifies the I2C Handle.
|
|
||||||
* @param __FLAG__ specifies the flag to check.
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg @ref I2C_FLAG_TXE Transmit data register empty
|
|
||||||
* @arg @ref I2C_FLAG_TXIS Transmit interrupt status
|
|
||||||
* @arg @ref I2C_FLAG_RXNE Receive data register not empty
|
|
||||||
* @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
|
|
||||||
* @arg @ref I2C_FLAG_AF Acknowledge failure received flag
|
|
||||||
* @arg @ref I2C_FLAG_STOPF STOP detection flag
|
|
||||||
* @arg @ref I2C_FLAG_TC Transfer complete (master mode)
|
|
||||||
* @arg @ref I2C_FLAG_TCR Transfer complete reload
|
|
||||||
* @arg @ref I2C_FLAG_BERR Bus error
|
|
||||||
* @arg @ref I2C_FLAG_ARLO Arbitration lost
|
|
||||||
* @arg @ref I2C_FLAG_OVR Overrun/Underrun
|
|
||||||
* @arg @ref I2C_FLAG_PECERR PEC error in reception
|
|
||||||
* @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
|
|
||||||
* @arg @ref I2C_FLAG_ALERT SMBus alert
|
|
||||||
* @arg @ref I2C_FLAG_BUSY Bus busy
|
|
||||||
* @arg @ref I2C_FLAG_DIR Transfer direction (slave mode)
|
|
||||||
*
|
|
||||||
* @retval The new state of __FLAG__ (SET or RESET).
|
|
||||||
*/
|
|
||||||
#define I2C_FLAG_MASK (0x0001FFFFU)
|
|
||||||
#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & \
|
|
||||||
(__FLAG__)) == (__FLAG__)) ? SET : RESET)
|
|
||||||
|
|
||||||
/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit.
|
|
||||||
* @param __HANDLE__ specifies the I2C Handle.
|
|
||||||
* @param __FLAG__ specifies the flag to clear.
|
|
||||||
* This parameter can be any combination of the following values:
|
|
||||||
* @arg @ref I2C_FLAG_TXE Transmit data register empty
|
|
||||||
* @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
|
|
||||||
* @arg @ref I2C_FLAG_AF Acknowledge failure received flag
|
|
||||||
* @arg @ref I2C_FLAG_STOPF STOP detection flag
|
|
||||||
* @arg @ref I2C_FLAG_BERR Bus error
|
|
||||||
* @arg @ref I2C_FLAG_ARLO Arbitration lost
|
|
||||||
* @arg @ref I2C_FLAG_OVR Overrun/Underrun
|
|
||||||
* @arg @ref I2C_FLAG_PECERR PEC error in reception
|
|
||||||
* @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
|
|
||||||
* @arg @ref I2C_FLAG_ALERT SMBus alert
|
|
||||||
*
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \
|
|
||||||
: ((__HANDLE__)->Instance->ICR = (__FLAG__)))
|
|
||||||
|
|
||||||
/** @brief Enable the specified I2C peripheral.
|
|
||||||
* @param __HANDLE__ specifies the I2C Handle.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
|
|
||||||
|
|
||||||
/** @brief Disable the specified I2C peripheral.
|
|
||||||
* @param __HANDLE__ specifies the I2C Handle.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
|
|
||||||
|
|
||||||
/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode.
|
|
||||||
* @param __HANDLE__ specifies the I2C Handle.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Include I2C HAL Extended module */
|
|
||||||
#include "stm32l0xx_hal_i2c_ex.h"
|
|
||||||
|
|
||||||
/* Exported functions --------------------------------------------------------*/
|
|
||||||
/** @addtogroup I2C_Exported_Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/* Initialization and de-initialization functions******************************/
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c);
|
|
||||||
void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
|
|
||||||
void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
|
|
||||||
|
|
||||||
/* Callbacks Register/UnRegister functions ***********************************/
|
|
||||||
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
||||||
HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID,
|
|
||||||
pI2C_CallbackTypeDef pCallback);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID);
|
|
||||||
|
|
||||||
HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c);
|
|
||||||
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/* IO operation functions ****************************************************/
|
|
||||||
/******* Blocking mode: Polling */
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size,
|
|
||||||
uint32_t Timeout);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size,
|
|
||||||
uint32_t Timeout);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
|
||||||
uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
|
||||||
uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials,
|
|
||||||
uint32_t Timeout);
|
|
||||||
|
|
||||||
/******* Non-Blocking mode: Interrupt */
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
|
||||||
uint16_t Size);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
|
||||||
uint16_t Size);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
|
||||||
uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
|
||||||
uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
|
||||||
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
|
||||||
uint16_t Size, uint32_t XferOptions);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
|
||||||
uint16_t Size, uint32_t XferOptions);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
|
||||||
uint32_t XferOptions);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
|
||||||
uint32_t XferOptions);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
|
|
||||||
|
|
||||||
/******* Non-Blocking mode: DMA */
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
|
||||||
uint16_t Size);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
|
||||||
uint16_t Size);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
|
||||||
uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
|
||||||
uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
|
||||||
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
|
||||||
uint16_t Size, uint32_t XferOptions);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
|
||||||
uint16_t Size, uint32_t XferOptions);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
|
||||||
uint32_t XferOptions);
|
|
||||||
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
|
||||||
uint32_t XferOptions);
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
|
|
||||||
void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
|
|
||||||
void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
|
|
||||||
void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
|
|
||||||
void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
|
|
||||||
void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
|
|
||||||
void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
|
|
||||||
void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
|
|
||||||
void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
|
|
||||||
void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
|
|
||||||
void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
|
|
||||||
void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
|
|
||||||
void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/* Peripheral State, Mode and Error functions *********************************/
|
|
||||||
HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
|
|
||||||
HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
|
|
||||||
uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Private constants ---------------------------------------------------------*/
|
|
||||||
/** @defgroup I2C_Private_Constants I2C Private Constants
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Private macros ------------------------------------------------------------*/
|
|
||||||
/** @defgroup I2C_Private_Macro I2C Private Macros
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \
|
|
||||||
((MODE) == I2C_ADDRESSINGMODE_10BIT))
|
|
||||||
|
|
||||||
#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
|
|
||||||
((ADDRESS) == I2C_DUALADDRESS_ENABLE))
|
|
||||||
|
|
||||||
#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \
|
|
||||||
((MASK) == I2C_OA2_MASK01) || \
|
|
||||||
((MASK) == I2C_OA2_MASK02) || \
|
|
||||||
((MASK) == I2C_OA2_MASK03) || \
|
|
||||||
((MASK) == I2C_OA2_MASK04) || \
|
|
||||||
((MASK) == I2C_OA2_MASK05) || \
|
|
||||||
((MASK) == I2C_OA2_MASK06) || \
|
|
||||||
((MASK) == I2C_OA2_MASK07))
|
|
||||||
|
|
||||||
#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
|
|
||||||
((CALL) == I2C_GENERALCALL_ENABLE))
|
|
||||||
|
|
||||||
#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
|
|
||||||
((STRETCH) == I2C_NOSTRETCH_ENABLE))
|
|
||||||
|
|
||||||
#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
|
|
||||||
((SIZE) == I2C_MEMADD_SIZE_16BIT))
|
|
||||||
|
|
||||||
#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \
|
|
||||||
((MODE) == I2C_AUTOEND_MODE) || \
|
|
||||||
((MODE) == I2C_SOFTEND_MODE))
|
|
||||||
|
|
||||||
#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \
|
|
||||||
((REQUEST) == I2C_GENERATE_START_READ) || \
|
|
||||||
((REQUEST) == I2C_GENERATE_START_WRITE) || \
|
|
||||||
((REQUEST) == I2C_NO_STARTSTOP))
|
|
||||||
|
|
||||||
#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \
|
|
||||||
((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \
|
|
||||||
((REQUEST) == I2C_NEXT_FRAME) || \
|
|
||||||
((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \
|
|
||||||
((REQUEST) == I2C_LAST_FRAME) || \
|
|
||||||
((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \
|
|
||||||
IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST))
|
|
||||||
|
|
||||||
#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \
|
|
||||||
((REQUEST) == I2C_OTHER_AND_LAST_FRAME))
|
|
||||||
|
|
||||||
#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \
|
|
||||||
(uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
|
|
||||||
|
|
||||||
#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U))
|
|
||||||
#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U))
|
|
||||||
#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
|
|
||||||
#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1))
|
|
||||||
#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2))
|
|
||||||
|
|
||||||
#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU)
|
|
||||||
#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU)
|
|
||||||
|
|
||||||
#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & \
|
|
||||||
(uint16_t)(0xFF00U))) >> 8U)))
|
|
||||||
#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
|
|
||||||
|
|
||||||
#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
|
|
||||||
(uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
|
|
||||||
|
|
||||||
#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == \
|
|
||||||
((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)
|
|
||||||
#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Private Functions ---------------------------------------------------------*/
|
|
||||||
/** @defgroup I2C_Private_Functions I2C Private Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/* Private functions are defined in stm32l0xx_hal_i2c.c file */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
|
|
||||||
#endif /* STM32L0xx_HAL_I2C_H */
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
@ -1,197 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_i2c_ex.h
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief Header file of I2C HAL Extended module.
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
||||||
#ifndef STM32L0xx_HAL_I2C_EX_H
|
|
||||||
#define STM32L0xx_HAL_I2C_EX_H
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
extern "C" {
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal_def.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup I2CEx
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported types ------------------------------------------------------------*/
|
|
||||||
/* Exported constants --------------------------------------------------------*/
|
|
||||||
/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define I2C_ANALOGFILTER_ENABLE 0x00000000U
|
|
||||||
#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */
|
|
||||||
#if defined(SYSCFG_CFGR2_I2C_PB6_FMP)
|
|
||||||
#define I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR2_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */
|
|
||||||
#define I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR2_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */
|
|
||||||
#else
|
|
||||||
#define I2C_FASTMODEPLUS_PB6 (uint32_t)(0x00000004U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB6 not supported */
|
|
||||||
#define I2C_FASTMODEPLUS_PB7 (uint32_t)(0x00000008U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB7 not supported */
|
|
||||||
#endif
|
|
||||||
#if defined(SYSCFG_CFGR2_I2C_PB8_FMP)
|
|
||||||
#define I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR2_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */
|
|
||||||
#define I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR2_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */
|
|
||||||
#else
|
|
||||||
#define I2C_FASTMODEPLUS_PB8 (uint32_t)(0x00000010U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB8 not supported */
|
|
||||||
#define I2C_FASTMODEPLUS_PB9 (uint32_t)(0x00000012U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB9 not supported */
|
|
||||||
#endif
|
|
||||||
#if defined(SYSCFG_CFGR2_I2C1_FMP)
|
|
||||||
#define I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR2_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */
|
|
||||||
#else
|
|
||||||
#define I2C_FASTMODEPLUS_I2C1 (uint32_t)(0x00000100U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C1 not supported */
|
|
||||||
#endif
|
|
||||||
#if defined(SYSCFG_CFGR2_I2C2_FMP)
|
|
||||||
#define I2C_FASTMODEPLUS_I2C2 SYSCFG_CFGR2_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */
|
|
||||||
#else
|
|
||||||
#define I2C_FASTMODEPLUS_I2C2 (uint32_t)(0x00000200U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C2 not supported */
|
|
||||||
#endif
|
|
||||||
#if defined(SYSCFG_CFGR2_I2C3_FMP)
|
|
||||||
#define I2C_FASTMODEPLUS_I2C3 SYSCFG_CFGR2_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */
|
|
||||||
#else
|
|
||||||
#define I2C_FASTMODEPLUS_I2C3 (uint32_t)(0x00000400U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C3 not supported */
|
|
||||||
#endif
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported macro ------------------------------------------------------------*/
|
|
||||||
/** @defgroup I2CEx_Exported_Macros I2C Extended Exported Macros
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported functions --------------------------------------------------------*/
|
|
||||||
/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup I2CEx_Exported_Functions_Group1 I2C Extended Filter Mode Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/* Peripheral Control functions ************************************************/
|
|
||||||
HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
|
|
||||||
HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup I2CEx_Exported_Functions_Group2 I2C Extended WakeUp Mode Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c);
|
|
||||||
HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c);
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup I2CEx_Exported_Functions_Group3 I2C Extended FastModePlus Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#if (defined(SYSCFG_CFGR2_I2C_PB6_FMP) || defined(SYSCFG_CFGR2_I2C_PB7_FMP)) || (defined(SYSCFG_CFGR2_I2C_PB8_FMP) || defined(SYSCFG_CFGR2_I2C_PB9_FMP)) || (defined(SYSCFG_CFGR2_I2C1_FMP)) || defined(SYSCFG_CFGR2_I2C2_FMP) || defined(SYSCFG_CFGR2_I2C3_FMP)
|
|
||||||
void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
|
|
||||||
void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
|
|
||||||
#endif
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Private constants ---------------------------------------------------------*/
|
|
||||||
/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Private macros ------------------------------------------------------------*/
|
|
||||||
/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \
|
|
||||||
((FILTER) == I2C_ANALOGFILTER_DISABLE))
|
|
||||||
|
|
||||||
#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU)
|
|
||||||
|
|
||||||
#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FMP_NOT_SUPPORTED) != I2C_FMP_NOT_SUPPORTED) && \
|
|
||||||
((((__CONFIG__) & (I2C_FASTMODEPLUS_PB6)) == I2C_FASTMODEPLUS_PB6) || \
|
|
||||||
(((__CONFIG__) & (I2C_FASTMODEPLUS_PB7)) == I2C_FASTMODEPLUS_PB7) || \
|
|
||||||
(((__CONFIG__) & (I2C_FASTMODEPLUS_PB8)) == I2C_FASTMODEPLUS_PB8) || \
|
|
||||||
(((__CONFIG__) & (I2C_FASTMODEPLUS_PB9)) == I2C_FASTMODEPLUS_PB9) || \
|
|
||||||
(((__CONFIG__) & (I2C_FASTMODEPLUS_I2C1)) == I2C_FASTMODEPLUS_I2C1) || \
|
|
||||||
(((__CONFIG__) & (I2C_FASTMODEPLUS_I2C2)) == I2C_FASTMODEPLUS_I2C2) || \
|
|
||||||
(((__CONFIG__) & (I2C_FASTMODEPLUS_I2C3)) == I2C_FASTMODEPLUS_I2C3)))
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Private Functions ---------------------------------------------------------*/
|
|
||||||
/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/* Private functions are defined in stm32l0xx_hal_i2c_ex.c file */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif /* STM32L0xx_HAL_I2C_EX_H */
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
@ -1,460 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_pwr.h
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief Header file of PWR HAL module.
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright(c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
||||||
#ifndef __STM32L0xx_HAL_PWR_H
|
|
||||||
#define __STM32L0xx_HAL_PWR_H
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
extern "C" {
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal_def.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup PWR PWR
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup PWR_Exported_Types PWR Exported Types
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#if defined(PWR_PVD_SUPPORT)
|
|
||||||
/**
|
|
||||||
* @brief PWR PVD configuration structure definition
|
|
||||||
*/
|
|
||||||
typedef struct
|
|
||||||
{
|
|
||||||
uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
|
|
||||||
This parameter can be a value of @ref PWR_PVD_detection_level */
|
|
||||||
|
|
||||||
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
|
|
||||||
This parameter can be a value of @ref PWR_PVD_Mode */
|
|
||||||
}PWR_PVDTypeDef;
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup PWR_Private
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#if defined(PWR_PVD_SUPPORT)
|
|
||||||
#define PWR_EXTI_LINE_PVD EXTI_FTSR_TR16 /*!< External interrupt line 16 Connected to the PVD EXTI Line */
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup PWR_Exported_Constants PWR Exported Constants
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup PWR_register_alias_address PWR Register alias address
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define PWR_WAKEUP_PIN1 PWR_CSR_EWUP1
|
|
||||||
#if defined (STM32L010x4) || defined (STM32L011xx) || defined (STM32L021xx)
|
|
||||||
#else
|
|
||||||
#define PWR_WAKEUP_PIN2 PWR_CSR_EWUP2
|
|
||||||
#endif
|
|
||||||
#if defined (STM32L010x4) || defined (STM32L010x6) || defined (STM32L011xx) || defined (STM32L021xx) || \
|
|
||||||
defined (STM32L031xx) || defined (STM32L041xx) || defined (STM32L071xx) || defined (STM32L072xx) || \
|
|
||||||
defined (STM32L073xx) || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
|
|
||||||
#define PWR_WAKEUP_PIN3 PWR_CSR_EWUP3
|
|
||||||
#endif
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#if defined(PWR_PVD_SUPPORT)
|
|
||||||
/** @defgroup PWR_PVD_detection_level PVD detection level
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0
|
|
||||||
#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1
|
|
||||||
#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2
|
|
||||||
#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3
|
|
||||||
#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4
|
|
||||||
#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5
|
|
||||||
#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6
|
|
||||||
#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7 /* External input analog voltage
|
|
||||||
(Compare internally to VREFINT) */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup PWR_PVD_Mode PWR PVD Mode
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define PWR_PVD_MODE_NORMAL (0x00000000U) /*!< basic mode is used */
|
|
||||||
#define PWR_PVD_MODE_IT_RISING (0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */
|
|
||||||
#define PWR_PVD_MODE_IT_FALLING (0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */
|
|
||||||
#define PWR_PVD_MODE_IT_RISING_FALLING (0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
|
||||||
#define PWR_PVD_MODE_EVENT_RISING (0x00020001U) /*!< Event Mode with Rising edge trigger detection */
|
|
||||||
#define PWR_PVD_MODE_EVENT_FALLING (0x00020002U) /*!< Event Mode with Falling edge trigger detection */
|
|
||||||
#define PWR_PVD_MODE_EVENT_RISING_FALLING (0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
#endif /* PWR_PVD_SUPPORT */
|
|
||||||
|
|
||||||
/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR Regulator state in SLEEP/STOP mode
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define PWR_MAINREGULATOR_ON (0x00000000U)
|
|
||||||
#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPSDSR
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define PWR_SLEEPENTRY_WFI (0x01U)
|
|
||||||
#define PWR_SLEEPENTRY_WFE (0x02U)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define PWR_STOPENTRY_WFI (0x01U)
|
|
||||||
#define PWR_STOPENTRY_WFE (0x02U)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS_0
|
|
||||||
#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR_VOS_1
|
|
||||||
#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR_VOS
|
|
||||||
|
|
||||||
#define IS_PWR_VOLTAGE_SCALING_RANGE(RANGE) (((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
|
|
||||||
((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
|
|
||||||
((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup PWR_Flag PWR Flag
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define PWR_FLAG_WU PWR_CSR_WUF
|
|
||||||
#define PWR_FLAG_SB PWR_CSR_SBF
|
|
||||||
#if defined(PWR_PVD_SUPPORT)
|
|
||||||
#define PWR_FLAG_PVDO PWR_CSR_PVDO
|
|
||||||
#endif
|
|
||||||
#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF
|
|
||||||
#define PWR_FLAG_VOS PWR_CSR_VOSF
|
|
||||||
#define PWR_FLAG_REGLP PWR_CSR_REGLPF
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup PWR_Exported_Macro PWR Exported Macros
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/** @brief macros configure the main internal regulator output voltage.
|
|
||||||
* When exiting Low Power Run Mode or during dynamic voltage scaling configuration,
|
|
||||||
* the reference manual recommends to poll PWR_FLAG_REGLP bit to wait for the regulator
|
|
||||||
* to reach main mode (resp. to get stabilized) for a transition from 0 to 1.
|
|
||||||
* Only then the clock can be increased.
|
|
||||||
*
|
|
||||||
* @param __REGULATOR__ specifies the regulator output voltage to achieve
|
|
||||||
* a tradeoff between performance and power consumption when the device does
|
|
||||||
* not operate at the maximum frequency (refer to the datasheets for more details).
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode,
|
|
||||||
* System frequency up to 32 MHz.
|
|
||||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode,
|
|
||||||
* System frequency up to 16 MHz.
|
|
||||||
* @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode,
|
|
||||||
* System frequency up to 4.2 MHz
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) (MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)))
|
|
||||||
|
|
||||||
/** @brief Check PWR flag is set or not.
|
|
||||||
* @param __FLAG__ specifies the flag to check.
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
|
|
||||||
* was received from the WKUP pin or from the RTC alarm (Alarm B),
|
|
||||||
* RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
|
|
||||||
* An additional wakeup event is detected if the WKUP pin is enabled
|
|
||||||
* (by setting the EWUP bit) when the WKUP pin level is already high.
|
|
||||||
* @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
|
|
||||||
* resumed from StandBy mode.
|
|
||||||
* @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
|
|
||||||
* by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode.
|
|
||||||
* For this reason, this bit is equal to 0 after Standby or reset
|
|
||||||
* until the PVDE bit is set. Not available on L0 Value line.
|
|
||||||
* @arg PWR_FLAG_VREFINTRDY: Internal voltage reference (VREFINT) ready flag.
|
|
||||||
* This bit indicates the state of the internal voltage reference, VREFINT.
|
|
||||||
* @arg PWR_FLAG_VOS: Voltage Scaling select flag. A delay is required for
|
|
||||||
* the internal regulator to be ready after the voltage range is changed.
|
|
||||||
* The VOSF bit indicates that the regulator has reached the voltage level
|
|
||||||
* defined with bits VOS of PWR_CR register.
|
|
||||||
* @arg PWR_FLAG_REGLP: Regulator LP flag. When the MCU exits from Low power run
|
|
||||||
* mode, this bit stays at 1 until the regulator is ready in main mode.
|
|
||||||
* A polling on this bit is recommended to wait for the regulator main mode.
|
|
||||||
* This bit is reset by hardware when the regulator is ready.
|
|
||||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
|
||||||
*/
|
|
||||||
#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
|
|
||||||
|
|
||||||
/** @brief Clear the PWR pending flags.
|
|
||||||
* @param __FLAG__ specifies the flag to clear.
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg PWR_FLAG_WU: Wake Up flag
|
|
||||||
* @arg PWR_FLAG_SB: StandBy flag
|
|
||||||
*/
|
|
||||||
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) SET_BIT(PWR->CR, (__FLAG__) << 2U)
|
|
||||||
|
|
||||||
#if defined(PWR_PVD_SUPPORT)
|
|
||||||
/**
|
|
||||||
* @brief Enable interrupt on PVD Exti Line 16.
|
|
||||||
* @retval None.
|
|
||||||
*/
|
|
||||||
#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disable interrupt on PVD Exti Line 16.
|
|
||||||
* @retval None.
|
|
||||||
*/
|
|
||||||
#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enable event on PVD Exti Line 16.
|
|
||||||
* @retval None.
|
|
||||||
*/
|
|
||||||
#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disable event on PVD Exti Line 16.
|
|
||||||
* @retval None.
|
|
||||||
*/
|
|
||||||
#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief PVD EXTI line configuration: set falling edge trigger.
|
|
||||||
* @retval None.
|
|
||||||
*/
|
|
||||||
#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disable the PVD Extended Interrupt Falling Trigger.
|
|
||||||
* @retval None.
|
|
||||||
*/
|
|
||||||
#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief PVD EXTI line configuration: set rising edge trigger.
|
|
||||||
* @retval None.
|
|
||||||
*/
|
|
||||||
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disable the PVD Extended Interrupt Rising Trigger.
|
|
||||||
* This parameter can be:
|
|
||||||
* @retval None.
|
|
||||||
*/
|
|
||||||
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief PVD EXTI line configuration: set rising & falling edge trigger.
|
|
||||||
* @retval None.
|
|
||||||
*/
|
|
||||||
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); } while(0);
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
|
|
||||||
* This parameter can be:
|
|
||||||
* @retval None.
|
|
||||||
*/
|
|
||||||
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0);
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Check whether the specified PVD EXTI interrupt flag is set or not.
|
|
||||||
* @retval EXTI PVD Line Status.
|
|
||||||
*/
|
|
||||||
#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Clear the PVD EXTI flag.
|
|
||||||
* @retval None.
|
|
||||||
*/
|
|
||||||
#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Generate a Software interrupt on selected EXTI line.
|
|
||||||
* @retval None.
|
|
||||||
*/
|
|
||||||
#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, PWR_EXTI_LINE_PVD)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Generate a Software interrupt on selected EXTI line.
|
|
||||||
* @retval None.
|
|
||||||
*/
|
|
||||||
#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, PWR_EXTI_LINE_PVD)
|
|
||||||
|
|
||||||
#endif /* PWR_PVD_SUPPORT */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup PWR_Private
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#if defined(PWR_PVD_SUPPORT)
|
|
||||||
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
|
|
||||||
((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
|
|
||||||
((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
|
|
||||||
((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
|
|
||||||
|
|
||||||
#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
|
|
||||||
((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
|
|
||||||
((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
|
|
||||||
((MODE) == PWR_PVD_MODE_NORMAL))
|
|
||||||
#endif /* PWR_PVD_SUPPORT */
|
|
||||||
|
|
||||||
#if defined (STM32L010x6) || defined (STM32L071xx) || defined (STM32L072xx) || defined (STM32L073xx) || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
|
|
||||||
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
|
|
||||||
((PIN) == PWR_WAKEUP_PIN2) || \
|
|
||||||
((PIN) == PWR_WAKEUP_PIN3))
|
|
||||||
#elif defined (STM32L010xB) || defined (STM32L051xx) || defined (STM32L052xx) || defined (STM32L053xx) || defined (STM32L062xx) || defined (STM32L063xx)
|
|
||||||
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
|
|
||||||
((PIN) == PWR_WAKEUP_PIN2))
|
|
||||||
#elif defined (STM32L010x8) || defined (STM32L031xx) || defined (STM32L041xx)
|
|
||||||
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
|
|
||||||
((PIN) == PWR_WAKEUP_PIN2))
|
|
||||||
#elif defined (STM32L010x4) || defined (STM32L011xx) || defined (STM32L021xx)
|
|
||||||
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
|
|
||||||
((PIN) == PWR_WAKEUP_PIN3))
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
|
|
||||||
((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
|
|
||||||
#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
|
|
||||||
|
|
||||||
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Include PWR HAL Extension module */
|
|
||||||
#include "stm32l0xx_hal_pwr_ex.h"
|
|
||||||
|
|
||||||
/** @defgroup PWR_Exported_Functions PWR Exported Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
void HAL_PWR_DeInit(void);
|
|
||||||
void HAL_PWR_EnableBkUpAccess(void);
|
|
||||||
void HAL_PWR_DisableBkUpAccess(void);
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup PWR_Exported_Functions_Group2 Low Power modes configuration functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#if defined(PWR_PVD_SUPPORT)
|
|
||||||
/* PVD control functions ************************************************/
|
|
||||||
void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
|
|
||||||
void HAL_PWR_EnablePVD(void);
|
|
||||||
void HAL_PWR_DisablePVD(void);
|
|
||||||
void HAL_PWR_PVD_IRQHandler(void);
|
|
||||||
void HAL_PWR_PVDCallback(void);
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* WakeUp pins configuration functions ****************************************/
|
|
||||||
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
|
|
||||||
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
|
|
||||||
|
|
||||||
/* Low Power modes configuration functions ************************************/
|
|
||||||
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
|
|
||||||
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
|
|
||||||
void HAL_PWR_EnterSTANDBYMode(void);
|
|
||||||
|
|
||||||
void HAL_PWR_EnableSleepOnExit(void);
|
|
||||||
void HAL_PWR_DisableSleepOnExit(void);
|
|
||||||
void HAL_PWR_EnableSEVOnPend(void);
|
|
||||||
void HAL_PWR_DisableSEVOnPend(void);
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Define the private group ***********************************/
|
|
||||||
/**************************************************************/
|
|
||||||
/** @defgroup PWR_Private PWR Private
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
/**************************************************************/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
|
|
||||||
#endif /* __STM32L0xx_HAL_PWR_H */
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
|
|
||||||
@ -1,99 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_pwr_ex.h
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief Header file of PWR HAL Extension module.
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright(c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
||||||
#ifndef __STM32L0xx_HAL_PWR_EX_H
|
|
||||||
#define __STM32L0xx_HAL_PWR_EX_H
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
extern "C" {
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal_def.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup PWREx PWREx
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup PWREx_Exported_Macros PWREx Exported Macros
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @brief Macros to enable the Deep-sleep mode with Flash memory kept off.
|
|
||||||
* @note When entering low power mode (stop or standby only), if DS_EE_KOFF and RUN_PD of
|
|
||||||
* FLASH_ACR register are both set , the Flash memory will not be woken up
|
|
||||||
* when exiting from deep-sleep mode.
|
|
||||||
*/
|
|
||||||
#define __HAL_PWR_FLASHWAKEUP_ENABLE() CLEAR_BIT(PWR->CR, PWR_CR_DSEEKOFF)
|
|
||||||
|
|
||||||
/** @brief Macros to disable the Deep-sleep mode with Flash memory kept off.
|
|
||||||
* @note When entering low power mode (stop or standby only), if DS_EE_KOFF and RUN_PD of
|
|
||||||
* FLASH_ACR register are both set , the Flash memory will not be woken up
|
|
||||||
* when exiting from deep-sleep mode.
|
|
||||||
*/
|
|
||||||
#define __HAL_PWR_FLASHWAKEUP_DISABLE() SET_BIT(PWR->CR, PWR_CR_DSEEKOFF)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup PWREx_Exported_Functions PWREx Exported Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
uint32_t HAL_PWREx_GetVoltageRange(void);
|
|
||||||
void HAL_PWREx_EnableFastWakeUp(void);
|
|
||||||
void HAL_PWREx_DisableFastWakeUp(void);
|
|
||||||
void HAL_PWREx_EnableUltraLowPower(void);
|
|
||||||
void HAL_PWREx_DisableUltraLowPower(void);
|
|
||||||
void HAL_PWREx_EnableLowPowerRunMode(void);
|
|
||||||
HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void);
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Define the private group ***********************************/
|
|
||||||
/**************************************************************/
|
|
||||||
/** @defgroup PWREx_Private PWREx Private
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
/**************************************************************/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif /* __STM32L0xx_HAL_PWR_EX_H */
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
|
|
||||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@ -1,247 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_tim_ex.h
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief Header file of TIM HAL Extended module.
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
||||||
#ifndef STM32L0xx_HAL_TIM_EX_H
|
|
||||||
#define STM32L0xx_HAL_TIM_EX_H
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
extern "C" {
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal_def.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup TIMEx
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported types ------------------------------------------------------------*/
|
|
||||||
/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
/* End of exported types -----------------------------------------------------*/
|
|
||||||
|
|
||||||
/* Exported constants --------------------------------------------------------*/
|
|
||||||
/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup TIMEx_Remap TIM Extended Remapping
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define TIM2_ETR_GPIO 0x00000000U /*!< TIM2 ETR input is connected to ORed GPIOs */
|
|
||||||
#if defined(RCC_HSI48_SUPPORT)
|
|
||||||
#define TIM2_ETR_HSI48 TIM2_OR_ETR_RMP_2 /*!< TIM2 ETR input is connected to HSI48 clock */
|
|
||||||
#endif /* RCC_HSI48_SUPPORT */
|
|
||||||
#define TIM2_ETR_HSI16 (TIM2_OR_ETR_RMP_1 | TIM2_OR_ETR_RMP_0) /*!< TIM2 ETR input is connected to HSI16 clock */
|
|
||||||
#define TIM2_ETR_LSE (TIM2_OR_ETR_RMP_2 | TIM2_OR_ETR_RMP_0) /*!< TIM2 ETR input is connected to LSE clock */
|
|
||||||
#if defined(COMP1) && defined(COMP2)
|
|
||||||
#define TIM2_ETR_COMP2_OUT (TIM2_OR_ETR_RMP_2 | TIM2_OR_ETR_RMP_1) /*!< TIM2 ETR input is connected to COMP2_OUT */
|
|
||||||
#define TIM2_ETR_COMP1_OUT TIM2_OR_ETR_RMP /*!< TIM2 ETR input is connected to COMP1_OUT */
|
|
||||||
#endif /* COMP1 && COMP2 */
|
|
||||||
|
|
||||||
#define TIM2_TI4_GPIO 0x00000000U /*!< TIM2 TI4 input connected to ORed GPIOs */
|
|
||||||
#if defined(COMP1) && defined(COMP2)
|
|
||||||
#define TIM2_TI4_COMP2 TIM2_OR_TI4_RMP_0 /*!< TIM2 TI4 input connected to COMP2_OUT */
|
|
||||||
#define TIM2_TI4_COMP1 TIM2_OR_TI4_RMP_1 /*!< TIM2 TI4 input connected to COMP1_OUT */
|
|
||||||
#endif /* COMP1 && COMP2 */
|
|
||||||
|
|
||||||
#if defined(TIM3)
|
|
||||||
#if defined(USB)
|
|
||||||
#define TIM3_TI4_USB_NOE 0x00000000U /*!< USB_NOE selected selected for PC9 (AF2) remapping */
|
|
||||||
#endif /* USB */
|
|
||||||
|
|
||||||
#define TIM3_TI4_GPIOC9_AF2 TIM3_OR_TI4_RMP /*!< TIM3_CH4 selected for PC9 (AF2) remapping */
|
|
||||||
#define TIM3_TI2_GPIO_DEF 0x00000000U /*!< TIM3_CH2 selected for PB5 (AF4) remapping */
|
|
||||||
#define TIM3_TI2_GPIOB5_AF4 TIM3_OR_TI2_RMP /*!< TIM22_CH2 selected for PB5 (AF4) remapping */
|
|
||||||
|
|
||||||
#if defined(USB)
|
|
||||||
#define TIM3_TI1_USB_SOF 0x00000000U /*!< TIM3 TI1 input connected to USB_SOF */
|
|
||||||
#endif /* USB */
|
|
||||||
|
|
||||||
#define TIM3_TI1_GPIO TIM3_OR_TI1_RMP /*!< TIM3 TI1 input connected to ORed GPIOs */
|
|
||||||
#define TIM3_ETR_GPIO 0x00000000U /*!< TIM3 ETR input connected to ORed GPIOs */
|
|
||||||
#define TIM3_ETR_HSI TIM3_OR_ETR_RMP_1 /*!< TIM3_ETR input is connected to HSI48 clock */
|
|
||||||
#endif /* TIM3 */
|
|
||||||
|
|
||||||
#define TIM21_ETR_GPIO 0x00000000U /*!< TIM21 ETR input connected to ORed GPIOs */
|
|
||||||
#if defined(COMP1) && defined(COMP2)
|
|
||||||
#define TIM21_ETR_COMP2_OUT TIM21_OR_ETR_RMP_0 /*!< TIM21 ETR input connected to COMP2_OUT */
|
|
||||||
#define TIM21_ETR_COMP1_OUT TIM21_OR_ETR_RMP_1 /*!< TIM21 ETR input connected to COMP1_OUT */
|
|
||||||
#endif /* COMP1 && COMP2 */
|
|
||||||
#define TIM21_ETR_LSE TIM21_OR_ETR_RMP /*!< TIM21 ETR input connected to LSE clock */
|
|
||||||
|
|
||||||
#define TIM21_TI1_GPIO 0x00000000U /*!< TIM21 TI1 input connected to ORed GPIOs */
|
|
||||||
#define TIM21_TI1_MCO TIM21_OR_TI1_RMP /*!< TIM21 TI1 input connected to MCO clock */
|
|
||||||
#define TIM21_TI1_RTC_WKUT_IT TIM21_OR_TI1_RMP_0 /*!< TIM21 TI1 input connected to RTC WAKEUP interrupt */
|
|
||||||
#define TIM21_TI1_HSE_RTC TIM21_OR_TI1_RMP_1 /*!< TIM21 TI1 input connected to HSE_RTC clock */
|
|
||||||
#define TIM21_TI1_MSI (TIM21_OR_TI1_RMP_0 | TIM21_OR_TI1_RMP_1) /*!< TIM21 TI1 input connected to MSI clock */
|
|
||||||
#define TIM21_TI1_LSE TIM21_OR_TI1_RMP_2 /*!< TIM21 TI1 input connected to LSE clock */
|
|
||||||
#define TIM21_TI1_LSI (TIM21_OR_TI1_RMP_2 | TIM21_OR_TI1_RMP_0) /*!< TIM21 TI1 input connected to LSI clock */
|
|
||||||
#if defined(COMP1)
|
|
||||||
#define TIM21_TI1_COMP1_OUT (TIM21_OR_TI1_RMP_2 | TIM21_OR_TI1_RMP_1) /*!< TIM21 TI1 input connected to COMP1_OUT */
|
|
||||||
#endif /* COMP1 */
|
|
||||||
|
|
||||||
#define TIM21_TI2_GPIO 0x00000000U /*!< TIM21 TI2 input connected to ORed GPIOs */
|
|
||||||
#if defined(COMP2)
|
|
||||||
#define TIM21_TI2_COMP2_OUT TIM21_OR_TI2_RMP /*!< TIM21 TI2 input connected to COMP2_OUT */
|
|
||||||
#endif /* COMP2 */
|
|
||||||
|
|
||||||
#if defined(TIM22)
|
|
||||||
#define TIM22_ETR_GPIO 0x00000000U /*!< TIM22 ETR input is connected to ORed GPIOs */
|
|
||||||
#if defined(COMP1) && defined(COMP2)
|
|
||||||
#define TIM22_ETR_COMP2_OUT TIM22_OR_ETR_RMP_0 /*!< TIM22 ETR input is connected to COMP2_OUT */
|
|
||||||
#define TIM22_ETR_COMP1_OUT TIM22_OR_ETR_RMP_1 /*!< TIM22 ETR input is connected to COMP1_OUT */
|
|
||||||
#endif /* COMP1 && COMP2 */
|
|
||||||
#define TIM22_ETR_LSE TIM22_OR_ETR_RMP /*!< TIM22 ETR input is connected to LSE clock */
|
|
||||||
|
|
||||||
#define TIM22_TI1_GPIO 0x00000000U /*!< TIM22 TI1 input is connected to ORed GPIOs */
|
|
||||||
#if defined(COMP1) && defined(COMP2)
|
|
||||||
#define TIM22_TI1_COMP2_OUT TIM22_OR_TI1_RMP_0 /*!< TIM22 TI1 input is connected to COMP2_OUT */
|
|
||||||
#define TIM22_TI1_COMP1_OUT TIM22_OR_TI1_RMP_1 /*!< TIM22 TI1 input is connected to COMP1_OUT */
|
|
||||||
#endif /* COMP1 && COMP2 */
|
|
||||||
#endif /* TIM22 */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
/* End of exported constants -------------------------------------------------*/
|
|
||||||
|
|
||||||
/* Exported macro ------------------------------------------------------------*/
|
|
||||||
/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
/* End of exported macro -----------------------------------------------------*/
|
|
||||||
|
|
||||||
/* Private macro -------------------------------------------------------------*/
|
|
||||||
/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#if defined(TIM3) && defined(TIM22)
|
|
||||||
|
|
||||||
#define IS_TIM_REMAP(__INSTANCE__, __TIM_REMAP__) \
|
|
||||||
((((__INSTANCE__) == TIM2) && ((__TIM_REMAP__) <= (TIM2_OR_TI4_RMP | TIM2_OR_ETR_RMP))) || \
|
|
||||||
(((__INSTANCE__) == TIM22) && ((__TIM_REMAP__) <= (TIM22_OR_TI1_RMP | TIM22_OR_ETR_RMP))) || \
|
|
||||||
(((__INSTANCE__) == TIM21) && ((__TIM_REMAP__) <= (TIM21_OR_ETR_RMP | TIM21_OR_TI1_RMP | TIM21_OR_TI2_RMP))) || \
|
|
||||||
(((__INSTANCE__) == TIM3) && ((__TIM_REMAP__) <= (TIM3_OR_ETR_RMP | TIM3_OR_TI1_RMP | TIM3_OR_TI2_RMP | TIM3_OR_TI4_RMP))))
|
|
||||||
|
|
||||||
#define IS_CHANNEL_AVAILABLE(__INSTANCE__, __CHANNEL__) \
|
|
||||||
((((__INSTANCE__) == TIM2) && (((__CHANNEL__) == TIM_CHANNEL_1) || \
|
|
||||||
((__CHANNEL__) == TIM_CHANNEL_2) || \
|
|
||||||
((__CHANNEL__) == TIM_CHANNEL_3) || \
|
|
||||||
((__CHANNEL__) == TIM_CHANNEL_4))) || \
|
|
||||||
(((__INSTANCE__) == TIM3) && (((__CHANNEL__) == TIM_CHANNEL_1) || \
|
|
||||||
((__CHANNEL__) == TIM_CHANNEL_2) || \
|
|
||||||
((__CHANNEL__) == TIM_CHANNEL_3) || \
|
|
||||||
((__CHANNEL__) == TIM_CHANNEL_4))) || \
|
|
||||||
(((__INSTANCE__) == TIM21) && (((__CHANNEL__) == TIM_CHANNEL_1) || \
|
|
||||||
((__CHANNEL__) == TIM_CHANNEL_2))) || \
|
|
||||||
(((__INSTANCE__) == TIM22) && (((__CHANNEL__) == TIM_CHANNEL_1) || \
|
|
||||||
((__CHANNEL__) == TIM_CHANNEL_2))))
|
|
||||||
|
|
||||||
#elif defined(TIM22)
|
|
||||||
|
|
||||||
#define IS_TIM_REMAP(__INSTANCE__, __TIM_REMAP__) \
|
|
||||||
((((__INSTANCE__) == TIM2) && ((__TIM_REMAP__) <= (TIM2_OR_TI4_RMP | TIM2_OR_ETR_RMP))) || \
|
|
||||||
(((__INSTANCE__) == TIM22) && ((__TIM_REMAP__) <= (TIM22_OR_TI1_RMP | TIM22_OR_ETR_RMP))) || \
|
|
||||||
(((__INSTANCE__) == TIM21) && ((__TIM_REMAP__) <= (TIM21_OR_ETR_RMP | TIM21_OR_TI1_RMP | TIM21_OR_TI2_RMP))))
|
|
||||||
|
|
||||||
#define IS_CHANNEL_AVAILABLE(__INSTANCE__, __CHANNEL__) \
|
|
||||||
((((__INSTANCE__) == TIM2) && (((__CHANNEL__) == TIM_CHANNEL_1) || \
|
|
||||||
((__CHANNEL__) == TIM_CHANNEL_2) || \
|
|
||||||
((__CHANNEL__) == TIM_CHANNEL_3) || \
|
|
||||||
((__CHANNEL__) == TIM_CHANNEL_4))) || \
|
|
||||||
(((__INSTANCE__) == TIM21) && (((__CHANNEL__) == TIM_CHANNEL_1) || \
|
|
||||||
((__CHANNEL__) == TIM_CHANNEL_2))) || \
|
|
||||||
(((__INSTANCE__) == TIM22) && (((__CHANNEL__) == TIM_CHANNEL_1) || \
|
|
||||||
((__CHANNEL__) == TIM_CHANNEL_2))))
|
|
||||||
#else
|
|
||||||
|
|
||||||
#define IS_TIM_REMAP(__INSTANCE__, __TIM_REMAP__) \
|
|
||||||
((((__INSTANCE__) == TIM2) && ((__TIM_REMAP__) <= (TIM2_OR_TI4_RMP | TIM2_OR_ETR_RMP))) || \
|
|
||||||
(((__INSTANCE__) == TIM21) && ((__TIM_REMAP__) <= (TIM21_OR_ETR_RMP | TIM21_OR_TI1_RMP | TIM21_OR_TI2_RMP))))
|
|
||||||
|
|
||||||
#define IS_CHANNEL_AVAILABLE(__INSTANCE__, __CHANNEL__) \
|
|
||||||
((((__INSTANCE__) == TIM2) && (((__CHANNEL__) == TIM_CHANNEL_1) || \
|
|
||||||
((__CHANNEL__) == TIM_CHANNEL_2) || \
|
|
||||||
((__CHANNEL__) == TIM_CHANNEL_3) || \
|
|
||||||
((__CHANNEL__) == TIM_CHANNEL_4))) || \
|
|
||||||
(((__INSTANCE__) == TIM21) && (((__CHANNEL__) == TIM_CHANNEL_1) || \
|
|
||||||
((__CHANNEL__) == TIM_CHANNEL_2))))
|
|
||||||
#endif /* TIM3 && TIM22 */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
/* End of private macro ------------------------------------------------------*/
|
|
||||||
|
|
||||||
/* Exported functions --------------------------------------------------------*/
|
|
||||||
/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
|
|
||||||
* @brief Peripheral Control functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/* Extended Control functions ************************************************/
|
|
||||||
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
|
|
||||||
TIM_MasterConfigTypeDef *sMasterConfig);
|
|
||||||
HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
/* End of exported functions -------------------------------------------------*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
|
|
||||||
#endif /* STM32L0xx_HAL_TIM_EX_H */
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
@ -1,674 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal.c
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief HAL module driver.
|
|
||||||
* This is the common part of the HAL initialization
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
==============================================================================
|
|
||||||
##### How to use this driver #####
|
|
||||||
==============================================================================
|
|
||||||
[..]
|
|
||||||
The common HAL driver contains a set of generic and common APIs that can be
|
|
||||||
used by the PPP peripheral drivers and the user to start using the HAL.
|
|
||||||
[..]
|
|
||||||
The HAL contains two APIs categories:
|
|
||||||
(+) Common HAL APIs
|
|
||||||
(+) Services HAL APIs
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef HAL_MODULE_ENABLED
|
|
||||||
|
|
||||||
/** @addtogroup HAL
|
|
||||||
* @brief HAL module driver.
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup HAL_Exported_Constants
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup HAL_Version HAL Version
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief STM32L0xx HAL Driver version number
|
|
||||||
*/
|
|
||||||
#define __STM32L0xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */
|
|
||||||
#define __STM32L0xx_HAL_VERSION_SUB1 (0x0AU) /*!< [23:16] sub1 version */
|
|
||||||
#define __STM32L0xx_HAL_VERSION_SUB2 (0x04U) /*!< [15:8] sub2 version */
|
|
||||||
#define __STM32L0xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */
|
|
||||||
#define __STM32L0xx_HAL_VERSION ((__STM32L0xx_HAL_VERSION_MAIN << 24U)\
|
|
||||||
|(__STM32L0xx_HAL_VERSION_SUB1 << 16U)\
|
|
||||||
|(__STM32L0xx_HAL_VERSION_SUB2 << 8U )\
|
|
||||||
|(__STM32L0xx_HAL_VERSION_RC))
|
|
||||||
|
|
||||||
#define IDCODE_DEVID_MASK (0x00000FFFU)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported variables --------------------------------------------------------*/
|
|
||||||
/** @addtogroup HAL_Exported_Variables
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
__IO uint32_t uwTick;
|
|
||||||
uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */
|
|
||||||
HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported functions --------------------------------------------------------*/
|
|
||||||
/** @addtogroup HAL_Exported_Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup HAL_Exported_Functions_Group1
|
|
||||||
* @brief Initialization and de-initialization functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
===============================================================================
|
|
||||||
##### Initialization and de-initialization functions #####
|
|
||||||
===============================================================================
|
|
||||||
[..] This section provides functions allowing to:
|
|
||||||
(+) Initialize the Flash interface, the NVIC allocation and initial clock
|
|
||||||
configuration. It initializes the source of time base also when timeout
|
|
||||||
is needed and the backup domain when enabled.
|
|
||||||
(+) De-initialize common part of the HAL.
|
|
||||||
(+) Configure the time base source to have 1ms time base with a dedicated
|
|
||||||
Tick interrupt priority.
|
|
||||||
(++) SysTick timer is used by default as source of time base, but user
|
|
||||||
can eventually implement his proper time base source (a general purpose
|
|
||||||
timer for example or other time source), keeping in mind that Time base
|
|
||||||
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
|
|
||||||
handled in milliseconds basis.
|
|
||||||
(++) Time base configuration function (HAL_InitTick ()) is called automatically
|
|
||||||
at the beginning of the program after reset by HAL_Init() or at any time
|
|
||||||
when clock is configured, by HAL_RCC_ClockConfig().
|
|
||||||
(++) Source of time base is configured to generate interrupts at regular
|
|
||||||
time intervals. Care must be taken if HAL_Delay() is called from a
|
|
||||||
peripheral ISR process, the Tick interrupt line must have higher priority
|
|
||||||
(numerically lower) than the peripheral interrupt. Otherwise the caller
|
|
||||||
ISR process will be blocked.
|
|
||||||
(++) functions affecting time base configurations are declared as __weak
|
|
||||||
to make override possible in case of other implementations in user file.
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief This function configures the Flash prefetch, Flash preread and Buffer cache,
|
|
||||||
* Configures time base source, NVIC and Low level hardware
|
|
||||||
* @note This function is called at the beginning of program after reset and before
|
|
||||||
* the clock configuration
|
|
||||||
* @note The time base configuration is based on MSI clock when exiting from Reset.
|
|
||||||
* Once done, time base tick start incrementing.
|
|
||||||
* In the default implementation,Systick is used as source of time base.
|
|
||||||
* the tick variable is incremented each 1ms in its ISR.
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_Init(void)
|
|
||||||
{
|
|
||||||
HAL_StatusTypeDef status = HAL_OK;
|
|
||||||
|
|
||||||
/* Configure Buffer cache, Flash prefetch, Flash preread */
|
|
||||||
#if (BUFFER_CACHE_DISABLE != 0)
|
|
||||||
__HAL_FLASH_BUFFER_CACHE_DISABLE();
|
|
||||||
#endif /* BUFFER_CACHE_DISABLE */
|
|
||||||
|
|
||||||
#if (PREREAD_ENABLE != 0)
|
|
||||||
__HAL_FLASH_PREREAD_BUFFER_ENABLE();
|
|
||||||
#endif /* PREREAD_ENABLE */
|
|
||||||
|
|
||||||
#if (PREFETCH_ENABLE != 0)
|
|
||||||
__HAL_FLASH_PREFETCH_BUFFER_ENABLE();
|
|
||||||
#endif /* PREFETCH_ENABLE */
|
|
||||||
|
|
||||||
/* Use SysTick as time base source and configure 1ms tick (default clock after Reset is MSI) */
|
|
||||||
if (HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK)
|
|
||||||
{
|
|
||||||
status = HAL_ERROR;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
/* Init the low level hardware */
|
|
||||||
HAL_MspInit();
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Return function status */
|
|
||||||
return status;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief This function de-initializes common part of the HAL and stops the source
|
|
||||||
* of time base.
|
|
||||||
* @note This function is optional.
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_DeInit(void)
|
|
||||||
{
|
|
||||||
/* Reset of all peripherals */
|
|
||||||
__HAL_RCC_APB1_FORCE_RESET();
|
|
||||||
__HAL_RCC_APB1_RELEASE_RESET();
|
|
||||||
|
|
||||||
__HAL_RCC_APB2_FORCE_RESET();
|
|
||||||
__HAL_RCC_APB2_RELEASE_RESET();
|
|
||||||
|
|
||||||
__HAL_RCC_AHB_FORCE_RESET();
|
|
||||||
__HAL_RCC_AHB_RELEASE_RESET();
|
|
||||||
|
|
||||||
__HAL_RCC_IOP_FORCE_RESET();
|
|
||||||
__HAL_RCC_IOP_RELEASE_RESET();
|
|
||||||
|
|
||||||
/* De-Init the low level hardware */
|
|
||||||
HAL_MspDeInit();
|
|
||||||
|
|
||||||
/* Return function status */
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Initializes the MSP.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
__weak void HAL_MspInit(void)
|
|
||||||
{
|
|
||||||
/* NOTE : This function should not be modified, when the callback is needed,
|
|
||||||
the HAL_MspInit could be implemented in the user file
|
|
||||||
*/
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief DeInitializes the MSP.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
__weak void HAL_MspDeInit(void)
|
|
||||||
{
|
|
||||||
/* NOTE : This function should not be modified, when the callback is needed,
|
|
||||||
the HAL_MspDeInit could be implemented in the user file
|
|
||||||
*/
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief This function configures the source of the time base:
|
|
||||||
* The time source is configured to have 1ms time base with a dedicated
|
|
||||||
* Tick interrupt priority.
|
|
||||||
* @note This function is called automatically at the beginning of program after
|
|
||||||
* reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig().
|
|
||||||
* @note In the default implementation, SysTick timer is the source of time base.
|
|
||||||
* It is used to generate interrupts at regular time intervals.
|
|
||||||
* Care must be taken if HAL_Delay() is called from a peripheral ISR process,
|
|
||||||
* The SysTick interrupt must have higher priority (numerically lower)
|
|
||||||
* than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
|
|
||||||
* The function is declared as __weak to be overwritten in case of other
|
|
||||||
* implementation in user file.
|
|
||||||
* @param TickPriority Tick interrupt priority.
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
|
|
||||||
{
|
|
||||||
/* Configure the SysTick to have interrupt in 1ms time basis*/
|
|
||||||
if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U)
|
|
||||||
{
|
|
||||||
return HAL_ERROR;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Configure the SysTick IRQ priority */
|
|
||||||
if (TickPriority < (1UL << __NVIC_PRIO_BITS))
|
|
||||||
{
|
|
||||||
HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U);
|
|
||||||
uwTickPrio = TickPriority;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
return HAL_ERROR;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Return function status */
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup HAL_Exported_Functions_Group2
|
|
||||||
* @brief HAL Control functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
===============================================================================
|
|
||||||
##### HAL Control functions #####
|
|
||||||
===============================================================================
|
|
||||||
[..] This section provides functions allowing to:
|
|
||||||
(+) Provide a tick value in millisecond
|
|
||||||
(+) Provide a blocking delay in millisecond
|
|
||||||
(+) Suspend the time base source interrupt
|
|
||||||
(+) Resume the time base source interrupt
|
|
||||||
(+) Get the HAL API driver version
|
|
||||||
(+) Get the device identifier
|
|
||||||
(+) Get the device revision identifier
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief This function is called to increment a global variable "uwTick"
|
|
||||||
* used as application time base.
|
|
||||||
* @note In the default implementation, this variable is incremented each 1ms
|
|
||||||
* in SysTick ISR.
|
|
||||||
* @note This function is declared as __weak to be overwritten in case of other
|
|
||||||
* implementations in user file.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
__weak void HAL_IncTick(void)
|
|
||||||
{
|
|
||||||
uwTick += uwTickFreq;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Provides a tick value in millisecond.
|
|
||||||
* @note This function is declared as __weak to be overwritten in case of other
|
|
||||||
* implementations in user file.
|
|
||||||
* @retval tick value
|
|
||||||
*/
|
|
||||||
__weak uint32_t HAL_GetTick(void)
|
|
||||||
{
|
|
||||||
return uwTick;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief This function returns a tick priority.
|
|
||||||
* @retval tick priority
|
|
||||||
*/
|
|
||||||
uint32_t HAL_GetTickPrio(void)
|
|
||||||
{
|
|
||||||
return uwTickPrio;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Set new tick Freq.
|
|
||||||
* @retval Status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq)
|
|
||||||
{
|
|
||||||
HAL_StatusTypeDef status = HAL_OK;
|
|
||||||
HAL_TickFreqTypeDef prevTickFreq;
|
|
||||||
|
|
||||||
assert_param(IS_TICKFREQ(Freq));
|
|
||||||
|
|
||||||
if (uwTickFreq != Freq)
|
|
||||||
{
|
|
||||||
/* Back up uwTickFreq frequency */
|
|
||||||
prevTickFreq = uwTickFreq;
|
|
||||||
|
|
||||||
/* Update uwTickFreq global variable used by HAL_InitTick() */
|
|
||||||
uwTickFreq = Freq;
|
|
||||||
|
|
||||||
/* Apply the new tick Freq */
|
|
||||||
status = HAL_InitTick(uwTickPrio);
|
|
||||||
|
|
||||||
if (status != HAL_OK)
|
|
||||||
{
|
|
||||||
/* Restore previous tick frequency */
|
|
||||||
uwTickFreq = prevTickFreq;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
return status;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Return tick frequency.
|
|
||||||
* @retval tick period in Hz
|
|
||||||
*/
|
|
||||||
HAL_TickFreqTypeDef HAL_GetTickFreq(void)
|
|
||||||
{
|
|
||||||
return uwTickFreq;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief This function provides minimum delay (in milliseconds) based
|
|
||||||
* on variable incremented.
|
|
||||||
* @note In the default implementation , SysTick timer is the source of time base.
|
|
||||||
* It is used to generate interrupts at regular time intervals where uwTick
|
|
||||||
* is incremented.
|
|
||||||
* @note This function is declared as __weak to be overwritten in case of other
|
|
||||||
* implementations in user file.
|
|
||||||
* @param Delay specifies the delay time length, in milliseconds.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
__weak void HAL_Delay(uint32_t Delay)
|
|
||||||
{
|
|
||||||
uint32_t tickstart = HAL_GetTick();
|
|
||||||
uint32_t wait = Delay;
|
|
||||||
|
|
||||||
/* Add a freq to guarantee minimum wait */
|
|
||||||
if (wait < HAL_MAX_DELAY)
|
|
||||||
{
|
|
||||||
wait += (uint32_t)(uwTickFreq);
|
|
||||||
}
|
|
||||||
|
|
||||||
while((HAL_GetTick() - tickstart) < wait)
|
|
||||||
{
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Suspends the Tick increment.
|
|
||||||
* @note In the default implementation , SysTick timer is the source of time base. It is
|
|
||||||
* used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
|
|
||||||
* is called, the SysTick interrupt will be disabled and so Tick increment
|
|
||||||
* is suspended.
|
|
||||||
* @note This function is declared as __weak to be overwritten in case of other
|
|
||||||
* implementations in user file.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
__weak void HAL_SuspendTick(void)
|
|
||||||
{
|
|
||||||
/* Disable SysTick Interrupt */
|
|
||||||
SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Resumes the Tick increment.
|
|
||||||
* @note In the default implementation , SysTick timer is the source of time base. It is
|
|
||||||
* used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
|
|
||||||
* is called, the SysTick interrupt will be enabled and so Tick increment
|
|
||||||
* is resumed.
|
|
||||||
* @note This function is declared as __weak to be overwritten in case of other
|
|
||||||
* implementations in user file.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
__weak void HAL_ResumeTick(void)
|
|
||||||
{
|
|
||||||
/* Enable SysTick Interrupt */
|
|
||||||
SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Returns the HAL revision
|
|
||||||
* @retval version: 0xXYZR (8bits for each decimal, R for RC)
|
|
||||||
*/
|
|
||||||
uint32_t HAL_GetHalVersion(void)
|
|
||||||
{
|
|
||||||
return __STM32L0xx_HAL_VERSION;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Returns the device revision identifier.
|
|
||||||
* @retval Device revision identifier
|
|
||||||
*/
|
|
||||||
uint32_t HAL_GetREVID(void)
|
|
||||||
{
|
|
||||||
return((DBGMCU->IDCODE) >> 16U);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Returns the device identifier.
|
|
||||||
* @retval Device identifier
|
|
||||||
*/
|
|
||||||
uint32_t HAL_GetDEVID(void)
|
|
||||||
{
|
|
||||||
return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Returns the first word of the unique device identifier (UID based on 96 bits)
|
|
||||||
* @retval Device identifier
|
|
||||||
*/
|
|
||||||
uint32_t HAL_GetUIDw0(void)
|
|
||||||
{
|
|
||||||
return(READ_REG(*((uint32_t *)UID_BASE)));
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Returns the second word of the unique device identifier (UID based on 96 bits)
|
|
||||||
* @retval Device identifier
|
|
||||||
*/
|
|
||||||
uint32_t HAL_GetUIDw1(void)
|
|
||||||
{
|
|
||||||
return(READ_REG(*((uint32_t *)(UID_BASE + 0x04U))));
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Returns the third word of the unique device identifier (UID based on 96 bits)
|
|
||||||
* @retval Device identifier
|
|
||||||
*/
|
|
||||||
uint32_t HAL_GetUIDw2(void)
|
|
||||||
{
|
|
||||||
return(READ_REG(*((uint32_t *)(UID_BASE + 0x14U))));
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup HAL_Exported_Functions_Group2
|
|
||||||
* @brief HAL Debug functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
===============================================================================
|
|
||||||
##### HAL Debug functions #####
|
|
||||||
===============================================================================
|
|
||||||
[..] This section provides functions allowing to:
|
|
||||||
(+) Enable/Disable Debug module during SLEEP mode
|
|
||||||
(+) Enable/Disable Debug module during STOP mode
|
|
||||||
(+) Enable/Disable Debug module during STANDBY mode
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enables the Debug Module during SLEEP mode
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_DBGMCU_EnableDBGSleepMode(void)
|
|
||||||
{
|
|
||||||
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disables the Debug Module during SLEEP mode
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_DBGMCU_DisableDBGSleepMode(void)
|
|
||||||
{
|
|
||||||
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enables the Debug Module during STOP mode
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_DBGMCU_EnableDBGStopMode(void)
|
|
||||||
{
|
|
||||||
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disables the Debug Module during STOP mode
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_DBGMCU_DisableDBGStopMode(void)
|
|
||||||
{
|
|
||||||
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enables the Debug Module during STANDBY mode
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_DBGMCU_EnableDBGStandbyMode(void)
|
|
||||||
{
|
|
||||||
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disables the Debug Module during STANDBY mode
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_DBGMCU_DisableDBGStandbyMode(void)
|
|
||||||
{
|
|
||||||
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enable low power mode behavior when the MCU is in Debug mode.
|
|
||||||
* @param Periph: specifies the low power mode.
|
|
||||||
* This parameter can be any combination of the following values:
|
|
||||||
* @arg DBGMCU_SLEEP: Keep debugger connection during SLEEP mode
|
|
||||||
* @arg DBGMCU_STOP: Keep debugger connection during STOP mode
|
|
||||||
* @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_DBGMCU_DBG_EnableLowPowerConfig(uint32_t Periph)
|
|
||||||
{
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_DBGMCU_PERIPH(Periph));
|
|
||||||
|
|
||||||
DBGMCU->CR |= Periph;
|
|
||||||
|
|
||||||
}
|
|
||||||
/**
|
|
||||||
* @brief Disable low power mode behavior when the MCU is in Debug mode.
|
|
||||||
* @param Periph: specifies the low power mode.
|
|
||||||
* This parameter can be any combination of the following values:
|
|
||||||
* @arg DBGMCU_SLEEP: Keep debugger connection during SLEEP mode
|
|
||||||
* @arg DBGMCU_STOP: Keep debugger connection during STOP mode
|
|
||||||
* @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_DBGMCU_DBG_DisableLowPowerConfig(uint32_t Periph)
|
|
||||||
{
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_DBGMCU_PERIPH(Periph));
|
|
||||||
{
|
|
||||||
DBGMCU->CR &= ~Periph;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup HAL_Exported_Functions_Group3
|
|
||||||
* @brief HAL SYSCFG configuration functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
===============================================================================
|
|
||||||
##### HAL SYSCFG configuration functions #####
|
|
||||||
===============================================================================
|
|
||||||
[..] This section provides functions allowing to:
|
|
||||||
(+) Return the boot mode
|
|
||||||
(+) Select the output of internal reference voltage (VREFINT)
|
|
||||||
(+) Lock/Unlock the SYSCFG VREF register values
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Returns the boot mode as configured by user.
|
|
||||||
* @retval The boot mode as configured by user. The returned value can be one
|
|
||||||
* of the following values:
|
|
||||||
* - 0x00000000 : Boot is configured in Main Flash memory
|
|
||||||
* - 0x00000100 : Boot is configured in System Flash memory
|
|
||||||
* - 0x00000300 : Boot is configured in Embedded SRAM memory
|
|
||||||
*/
|
|
||||||
uint32_t HAL_SYSCFG_GetBootMode(void)
|
|
||||||
{
|
|
||||||
return (SYSCFG->CFGR1 & SYSCFG_CFGR1_BOOT_MODE);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Selects the output of internal reference voltage (VREFINT).
|
|
||||||
* The VREFINT output can be routed to(PB0) or
|
|
||||||
* (PB1) or both.
|
|
||||||
* @param SYSCFG_Vrefint_OUTPUT: new state of the Vrefint output.
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg SYSCFG_VREFINT_OUT_NONE
|
|
||||||
* @arg SYSCFG_VREFINT_OUT_PB0
|
|
||||||
* @arg SYSCFG_VREFINT_OUT_PB1
|
|
||||||
* @arg SYSCFG_VREFINT_OUT_PB0_PB1
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_SYSCFG_VREFINT_OutputSelect(uint32_t SYSCFG_Vrefint_OUTPUT)
|
|
||||||
{
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_SYSCFG_VREFINT_OUT_SELECT(SYSCFG_Vrefint_OUTPUT));
|
|
||||||
|
|
||||||
/* Set the output Vrefint pin */
|
|
||||||
SYSCFG->CFGR3 &= ~(SYSCFG_CFGR3_VREF_OUT);
|
|
||||||
SYSCFG->CFGR3 |= (uint32_t)(SYSCFG_Vrefint_OUTPUT);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Lock the SYSCFG VREF register values
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_SYSCFG_Enable_Lock_VREFINT(void)
|
|
||||||
{
|
|
||||||
/* Enable the LOCK by setting REF_LOCK bit in the CFGR3 register */
|
|
||||||
SET_BIT(SYSCFG->CFGR3, SYSCFG_CFGR3_REF_LOCK);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Unlock the overall SYSCFG VREF register values
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_SYSCFG_Disable_Lock_VREFINT(void)
|
|
||||||
{
|
|
||||||
/* Disable the LOCK by setting REF_LOCK bit in the CFGR3 register */
|
|
||||||
CLEAR_BIT(SYSCFG->CFGR3, SYSCFG_CFGR3_REF_LOCK);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
#endif /* HAL_MODULE_ENABLED */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
|
|
||||||
@ -1,415 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_cortex.c
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief CORTEX HAL module driver.
|
|
||||||
* This file provides firmware functions to manage the following
|
|
||||||
* functionalities of the CORTEX:
|
|
||||||
* + Initialization and Configuration functions
|
|
||||||
* + Peripheral Control functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
==============================================================================
|
|
||||||
##### How to use this driver #####
|
|
||||||
==============================================================================
|
|
||||||
[..]
|
|
||||||
*** How to configure Interrupts using CORTEX HAL driver ***
|
|
||||||
===========================================================
|
|
||||||
[..]
|
|
||||||
This section provides functions allowing to configure the NVIC interrupts (IRQ).
|
|
||||||
The Cortex M0+ exceptions are managed by CMSIS functions.
|
|
||||||
(#) Enable and Configure the priority of the selected IRQ Channels.
|
|
||||||
The priority can be 0..3.
|
|
||||||
|
|
||||||
-@- Lower priority values gives higher priority.
|
|
||||||
-@- Priority Order:
|
|
||||||
(#@) Lowest priority.
|
|
||||||
(#@) Lowest hardware priority (IRQn position).
|
|
||||||
|
|
||||||
(#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority()
|
|
||||||
|
|
||||||
(#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ()
|
|
||||||
|
|
||||||
[..]
|
|
||||||
*** How to configure Systick using CORTEX HAL driver ***
|
|
||||||
========================================================
|
|
||||||
[..]
|
|
||||||
Setup SysTick Timer for time base.
|
|
||||||
|
|
||||||
(+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which
|
|
||||||
is a CMSIS function that:
|
|
||||||
(++) Configures the SysTick Reload register with value passed as function parameter.
|
|
||||||
(++) Configures the SysTick IRQ priority to the lowest value (0x03).
|
|
||||||
(++) Resets the SysTick Counter register.
|
|
||||||
(++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
|
|
||||||
(++) Enables the SysTick Interrupt.
|
|
||||||
(++) Starts the SysTick Counter.
|
|
||||||
|
|
||||||
(+) You can change the SysTick Clock source to be HCLK_Div8 by calling the function
|
|
||||||
HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
|
|
||||||
HAL_SYSTICK_Config() function call. The HAL_SYSTICK_CLKSourceConfig() function is defined
|
|
||||||
inside the stm32l0xx_hal_cortex.c file.
|
|
||||||
|
|
||||||
(+) You can change the SysTick IRQ priority by calling the
|
|
||||||
HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function
|
|
||||||
call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
|
|
||||||
|
|
||||||
(+) To adjust the SysTick time base, use the following formula:
|
|
||||||
|
|
||||||
Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s)
|
|
||||||
(++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
|
|
||||||
(++) Reload Value should not exceed 0xFFFFFF
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright(c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
|
||||||
|
|
||||||
/** @addtogroup CORTEX
|
|
||||||
* @brief CORTEX HAL module driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Private types -------------------------------------------------------------*/
|
|
||||||
/* Private variables ---------------------------------------------------------*/
|
|
||||||
/* Private constants ---------------------------------------------------------*/
|
|
||||||
/* Private macros ------------------------------------------------------------*/
|
|
||||||
/* Private functions ---------------------------------------------------------*/
|
|
||||||
/* Exported functions --------------------------------------------------------*/
|
|
||||||
|
|
||||||
/** @addtogroup CORTEX_Exported_Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
/** @addtogroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
||||||
* @brief Initialization and Configuration functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
==============================================================================
|
|
||||||
##### Initialization and Configuration functions #####
|
|
||||||
==============================================================================
|
|
||||||
[..]
|
|
||||||
This section provides the CORTEX HAL driver functions allowing to configure Interrupts
|
|
||||||
Systick functionalities
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Sets the priority of an interrupt.
|
|
||||||
* @param IRQn External interrupt number .
|
|
||||||
* This parameter can be an enumerator of IRQn_Type enumeration
|
|
||||||
* (For the complete STM32 Devices IRQ Channels list, please refer to stm32l0xx.h file)
|
|
||||||
* @param PreemptPriority The pre-emption priority for the IRQn channel.
|
|
||||||
* This parameter can be a value between 0 and 3.
|
|
||||||
* A lower priority value indicates a higher priority
|
|
||||||
* @param SubPriority the subpriority level for the IRQ channel.
|
|
||||||
* with stm32l0xx devices, this parameter is a dummy value and it is ignored, because
|
|
||||||
* no subpriority supported in Cortex M0+ based products.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
|
|
||||||
{
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
|
|
||||||
NVIC_SetPriority(IRQn,PreemptPriority);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enable a device specific interrupt in the NVIC interrupt controller.
|
|
||||||
* @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
|
|
||||||
* function should be called before.
|
|
||||||
* @param IRQn External interrupt number .
|
|
||||||
* This parameter can be an enumerator of IRQn_Type enumeration
|
|
||||||
* (For the complete STM32 Devices IRQ Channels list, please refer to stm32l0xx.h file)
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
|
|
||||||
{
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
|
|
||||||
|
|
||||||
/* Enable interrupt */
|
|
||||||
NVIC_EnableIRQ(IRQn);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disable a device specific interrupt in the NVIC interrupt controller.
|
|
||||||
* @param IRQn External interrupt number .
|
|
||||||
* This parameter can be an enumerator of IRQn_Type enumeration
|
|
||||||
* (For the complete STM32 Devices IRQ Channels list, please refer to stm32l0xx.h file)
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
|
|
||||||
{
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
|
|
||||||
|
|
||||||
/* Disable interrupt */
|
|
||||||
NVIC_DisableIRQ(IRQn);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Initiate a system reset request to reset the MCU.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_NVIC_SystemReset(void)
|
|
||||||
{
|
|
||||||
/* System Reset */
|
|
||||||
NVIC_SystemReset();
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Initialize the System Timer with interrupt enabled and start the System Tick Timer (SysTick)
|
|
||||||
* Counter is in free running mode to generate periodic interrupts.
|
|
||||||
* @param TicksNumb Specifies the ticks Number of ticks between two interrupts.
|
|
||||||
* @retval status: - 0 Function succeeded.
|
|
||||||
* - 1 Function failed.
|
|
||||||
*/
|
|
||||||
uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
|
|
||||||
{
|
|
||||||
return SysTick_Config(TicksNumb);
|
|
||||||
}
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
|
|
||||||
* @brief Cortex control functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
==============================================================================
|
|
||||||
##### Peripheral Control functions #####
|
|
||||||
==============================================================================
|
|
||||||
[..]
|
|
||||||
This subsection provides a set of functions allowing to control the CORTEX
|
|
||||||
(NVIC, SYSTICK) functionalities.
|
|
||||||
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Gets the priority of an interrupt.
|
|
||||||
* @param IRQn External interrupt number.
|
|
||||||
* This parameter can be an enumerator of IRQn_Type enumeration
|
|
||||||
* (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l0xxxx.h))
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn)
|
|
||||||
{
|
|
||||||
/* Get priority for Cortex-M system or device specific interrupts */
|
|
||||||
return NVIC_GetPriority(IRQn);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Sets Pending bit of an external interrupt.
|
|
||||||
* @param IRQn External interrupt number
|
|
||||||
* This parameter can be an enumerator of IRQn_Type enumeration
|
|
||||||
* (For the complete STM32 Devices IRQ Channels list, please refer to stm32l0xx.h file)
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
|
|
||||||
{
|
|
||||||
/* Set interrupt pending */
|
|
||||||
NVIC_SetPendingIRQ(IRQn);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Get Pending Interrupt (read the pending register in the NVIC
|
|
||||||
* and return the pending bit for the specified interrupt).
|
|
||||||
* @param IRQn External interrupt number .
|
|
||||||
* This parameter can be an enumerator of IRQn_Type enumeration
|
|
||||||
* (For the complete STM32 Devices IRQ Channels list, please refer to stm32l0xx.h file)
|
|
||||||
* @retval status: - 0 Interrupt status is not pending.
|
|
||||||
* - 1 Interrupt status is pending.
|
|
||||||
*/
|
|
||||||
uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
|
|
||||||
{
|
|
||||||
/* Return 1 if pending else 0 */
|
|
||||||
return NVIC_GetPendingIRQ(IRQn);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Clear the pending bit of an external interrupt.
|
|
||||||
* @param IRQn External interrupt number .
|
|
||||||
* This parameter can be an enumerator of IRQn_Type enumeration
|
|
||||||
* (For the complete STM32 Devices IRQ Channels list, please refer to stm32l0xx.h file)
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
|
|
||||||
{
|
|
||||||
/* Clear pending interrupt */
|
|
||||||
NVIC_ClearPendingIRQ(IRQn);
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Configure the SysTick clock source.
|
|
||||||
* @param CLKSource specifies the SysTick clock source.
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
|
|
||||||
* @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
|
|
||||||
{
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
|
|
||||||
if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
|
|
||||||
{
|
|
||||||
SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Handle SYSTICK interrupt request.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_SYSTICK_IRQHandler(void)
|
|
||||||
{
|
|
||||||
HAL_SYSTICK_Callback();
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief SYSTICK callback.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
__weak void HAL_SYSTICK_Callback(void)
|
|
||||||
{
|
|
||||||
/* NOTE : This function should not be modified, when the callback is needed,
|
|
||||||
the HAL_SYSTICK_Callback could be implemented in the user file
|
|
||||||
*/
|
|
||||||
}
|
|
||||||
|
|
||||||
#if (__MPU_PRESENT == 1U)
|
|
||||||
/**
|
|
||||||
* @brief Disable the MPU.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_MPU_Disable(void)
|
|
||||||
{
|
|
||||||
|
|
||||||
/*Data Memory Barrier setup */
|
|
||||||
__DMB();
|
|
||||||
/* Disable the MPU */
|
|
||||||
MPU->CTRL = 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enable the MPU.
|
|
||||||
* @param MPU_Control Specifies the control mode of the MPU during hard fault,
|
|
||||||
* NMI, FAULTMASK and privileged access to the default memory
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg MPU_HFNMI_PRIVDEF_NONE
|
|
||||||
* @arg MPU_HARDFAULT_NMI
|
|
||||||
* @arg MPU_PRIVILEGED_DEFAULT
|
|
||||||
* @arg MPU_HFNMI_PRIVDEF
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
|
|
||||||
void HAL_MPU_Enable(uint32_t MPU_Control)
|
|
||||||
{
|
|
||||||
/* Enable the MPU */
|
|
||||||
MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
|
|
||||||
/* Data Synchronization Barrier setup */
|
|
||||||
__DSB();
|
|
||||||
/* Instruction Synchronization Barrier setup */
|
|
||||||
__ISB();
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Initialize and configure the Region and the memory to be protected.
|
|
||||||
* @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains
|
|
||||||
* the initialization and configuration information.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init)
|
|
||||||
{
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number));
|
|
||||||
assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable));
|
|
||||||
|
|
||||||
/* Set the Region number */
|
|
||||||
MPU->RNR = MPU_Init->Number;
|
|
||||||
|
|
||||||
if ((MPU_Init->Enable) == MPU_REGION_ENABLE)
|
|
||||||
{
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec));
|
|
||||||
assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission));
|
|
||||||
assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable));
|
|
||||||
assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable));
|
|
||||||
assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable));
|
|
||||||
assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable));
|
|
||||||
assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size));
|
|
||||||
|
|
||||||
/* Set the base adsress and set the 4 LSB to 0 */
|
|
||||||
MPU->RBAR = (MPU_Init->BaseAddress) & 0xfffffff0U;
|
|
||||||
|
|
||||||
/* Fill the field RASR */
|
|
||||||
MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) |
|
|
||||||
((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) |
|
|
||||||
((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) |
|
|
||||||
((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) |
|
|
||||||
((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) |
|
|
||||||
((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) |
|
|
||||||
((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) |
|
|
||||||
((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos);
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
MPU->RBAR = 0x00U;
|
|
||||||
MPU->RASR = 0x00U;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
#endif /* __MPU_PRESENT */
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
|
|
||||||
@ -1,885 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_dma.c
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief DMA HAL module driver.
|
|
||||||
* This file provides firmware functions to manage the following
|
|
||||||
* functionalities of the Direct Memory Access (DMA) peripheral:
|
|
||||||
* + Initialization and de-initialization functions
|
|
||||||
* + IO operation functions
|
|
||||||
* + Peripheral State and errors functions
|
|
||||||
@verbatim
|
|
||||||
==============================================================================
|
|
||||||
##### How to use this driver #####
|
|
||||||
==============================================================================
|
|
||||||
[..]
|
|
||||||
(#) Enable and configure the peripheral to be connected to the DMA Channel
|
|
||||||
(except for internal SRAM / FLASH memories: no initialization is
|
|
||||||
necessary).
|
|
||||||
|
|
||||||
(#) For a given Channel, program the required configuration through the following parameters:
|
|
||||||
Channel request, Transfer Direction, Source and Destination data formats,
|
|
||||||
Circular or Normal mode, Channel Priority level, Source and Destination Increment mode
|
|
||||||
using HAL_DMA_Init() function.
|
|
||||||
|
|
||||||
(#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error
|
|
||||||
detection.
|
|
||||||
|
|
||||||
(#) Use HAL_DMA_Abort() function to abort the current transfer
|
|
||||||
|
|
||||||
-@- In Memory-to-Memory transfer mode, Circular mode is not allowed.
|
|
||||||
|
|
||||||
*** Polling mode IO operation ***
|
|
||||||
=================================
|
|
||||||
[..]
|
|
||||||
(+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source
|
|
||||||
address and destination address and the Length of data to be transferred
|
|
||||||
(+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this
|
|
||||||
case a fixed Timeout can be configured by User depending from his application.
|
|
||||||
|
|
||||||
*** Interrupt mode IO operation ***
|
|
||||||
===================================
|
|
||||||
[..]
|
|
||||||
(+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority()
|
|
||||||
(+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ()
|
|
||||||
(+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of
|
|
||||||
Source address and destination address and the Length of data to be transferred.
|
|
||||||
In this case the DMA interrupt is configured
|
|
||||||
(+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine
|
|
||||||
(+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can
|
|
||||||
add his own function to register callbacks with HAL_DMA_RegisterCallback().
|
|
||||||
|
|
||||||
*** DMA HAL driver macros list ***
|
|
||||||
=============================================
|
|
||||||
[..]
|
|
||||||
Below the list of macros in DMA HAL driver.
|
|
||||||
|
|
||||||
(+) __HAL_DMA_ENABLE: Enable the specified DMA Channel.
|
|
||||||
(+) __HAL_DMA_DISABLE: Disable the specified DMA Channel.
|
|
||||||
(+) __HAL_DMA_GET_FLAG: Get the DMA Channel pending flags.
|
|
||||||
(+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Channel pending flags.
|
|
||||||
(+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Channel interrupts.
|
|
||||||
(+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Channel interrupts.
|
|
||||||
(+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Channel interrupt has occurred or not.
|
|
||||||
|
|
||||||
[..]
|
|
||||||
(@) You can refer to the DMA HAL driver header file for more useful macros
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup DMA DMA
|
|
||||||
* @brief DMA HAL module driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef HAL_DMA_MODULE_ENABLED
|
|
||||||
|
|
||||||
/* Private typedef -----------------------------------------------------------*/
|
|
||||||
/** @defgroup DMA_Private_Functions DMA Private Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported functions ---------------------------------------------------------*/
|
|
||||||
|
|
||||||
/** @defgroup DMA_Exported_Functions DMA Exported Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
||||||
* @brief Initialization and de-initialization functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
===============================================================================
|
|
||||||
##### Initialization and de-initialization functions #####
|
|
||||||
===============================================================================
|
|
||||||
[..]
|
|
||||||
This section provides functions allowing to initialize the DMA Channel source
|
|
||||||
and destination addresses, incrementation and data sizes, transfer direction,
|
|
||||||
circular/normal mode selection, memory-to-memory mode selection and Channel priority value.
|
|
||||||
[..]
|
|
||||||
The HAL_DMA_Init() function follows the DMA configuration procedures as described in
|
|
||||||
reference manual.
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Initialize the DMA according to the specified
|
|
||||||
* parameters in the DMA_InitTypeDef and initialize the associated handle.
|
|
||||||
* @param hdma Pointer to a DMA_HandleTypeDef structure that contains
|
|
||||||
* the configuration information for the specified DMA Channel.
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma)
|
|
||||||
{
|
|
||||||
uint32_t tmp;
|
|
||||||
|
|
||||||
/* Check the DMA handle allocation */
|
|
||||||
if(hdma == NULL)
|
|
||||||
{
|
|
||||||
return HAL_ERROR;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
|
|
||||||
assert_param(IS_DMA_ALL_REQUEST(hdma->Init.Request));
|
|
||||||
assert_param(IS_DMA_DIRECTION(hdma->Init.Direction));
|
|
||||||
assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc));
|
|
||||||
assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc));
|
|
||||||
assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment));
|
|
||||||
assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment));
|
|
||||||
assert_param(IS_DMA_MODE(hdma->Init.Mode));
|
|
||||||
assert_param(IS_DMA_PRIORITY(hdma->Init.Priority));
|
|
||||||
|
|
||||||
/* Compute the channel index */
|
|
||||||
/* Only one DMA: DMA1 */
|
|
||||||
hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2;
|
|
||||||
hdma->DmaBaseAddress = DMA1;
|
|
||||||
|
|
||||||
/* Change DMA peripheral state */
|
|
||||||
hdma->State = HAL_DMA_STATE_BUSY;
|
|
||||||
|
|
||||||
/* Get the CR register value */
|
|
||||||
tmp = hdma->Instance->CCR;
|
|
||||||
|
|
||||||
/* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR and MEM2MEM bits */
|
|
||||||
tmp &= ((uint32_t)~(DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE |
|
|
||||||
DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC |
|
|
||||||
DMA_CCR_DIR | DMA_CCR_MEM2MEM));
|
|
||||||
|
|
||||||
/* Prepare the DMA Channel configuration */
|
|
||||||
tmp |= hdma->Init.Direction |
|
|
||||||
hdma->Init.PeriphInc | hdma->Init.MemInc |
|
|
||||||
hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment |
|
|
||||||
hdma->Init.Mode | hdma->Init.Priority;
|
|
||||||
|
|
||||||
/* Write to DMA Channel CR register */
|
|
||||||
hdma->Instance->CCR = tmp;
|
|
||||||
|
|
||||||
/* Set request selection */
|
|
||||||
if(hdma->Init.Direction != DMA_MEMORY_TO_MEMORY)
|
|
||||||
{
|
|
||||||
/* Write to DMA channel selection register */
|
|
||||||
/* Reset request selection for DMA1 Channelx */
|
|
||||||
DMA1_CSELR->CSELR &= ~(DMA_CSELR_C1S << (hdma->ChannelIndex & 0x1cU));
|
|
||||||
|
|
||||||
/* Configure request selection for DMA1 Channelx */
|
|
||||||
DMA1_CSELR->CSELR |= (uint32_t) (hdma->Init.Request << (hdma->ChannelIndex & 0x1cU));
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Initialise the error code */
|
|
||||||
hdma->ErrorCode = HAL_DMA_ERROR_NONE;
|
|
||||||
|
|
||||||
/* Initialize the DMA state*/
|
|
||||||
hdma->State = HAL_DMA_STATE_READY;
|
|
||||||
|
|
||||||
/* Allocate lock resource and initialize it */
|
|
||||||
hdma->Lock = HAL_UNLOCKED;
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief DeInitialize the DMA peripheral.
|
|
||||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
||||||
* the configuration information for the specified DMA Channel.
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma)
|
|
||||||
{
|
|
||||||
|
|
||||||
/* Check the DMA handle allocation */
|
|
||||||
if (NULL == hdma )
|
|
||||||
{
|
|
||||||
return HAL_ERROR;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
|
|
||||||
|
|
||||||
/* Disable the selected DMA Channelx */
|
|
||||||
__HAL_DMA_DISABLE(hdma);
|
|
||||||
|
|
||||||
/* Compute the channel index */
|
|
||||||
/* DMA1 */
|
|
||||||
hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2;
|
|
||||||
hdma->DmaBaseAddress = DMA1;
|
|
||||||
|
|
||||||
/* Reset DMA Channel control register */
|
|
||||||
hdma->Instance->CCR = 0U;
|
|
||||||
|
|
||||||
/* Clear all flags */
|
|
||||||
hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1cU));
|
|
||||||
|
|
||||||
/* Reset DMA channel selection register */
|
|
||||||
/* DMA1 */
|
|
||||||
DMA1_CSELR->CSELR &= ~(DMA_CSELR_C1S << (hdma->ChannelIndex & 0x1cU));
|
|
||||||
|
|
||||||
/* Clean callbacks */
|
|
||||||
hdma->XferCpltCallback = NULL;
|
|
||||||
hdma->XferHalfCpltCallback = NULL;
|
|
||||||
hdma->XferErrorCallback = NULL;
|
|
||||||
hdma->XferAbortCallback = NULL;
|
|
||||||
|
|
||||||
/* Initialise the error code */
|
|
||||||
hdma->ErrorCode = HAL_DMA_ERROR_NONE;
|
|
||||||
|
|
||||||
/* Initialize the DMA state */
|
|
||||||
hdma->State = HAL_DMA_STATE_RESET;
|
|
||||||
|
|
||||||
/* Release Lock */
|
|
||||||
__HAL_UNLOCK(hdma);
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions
|
|
||||||
* @brief Input and Output operation functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
===============================================================================
|
|
||||||
##### IO operation functions #####
|
|
||||||
===============================================================================
|
|
||||||
[..] This section provides functions allowing to:
|
|
||||||
(+) Configure the source, destination address and data length and Start DMA transfer
|
|
||||||
(+) Configure the source, destination address and data length and
|
|
||||||
Start DMA transfer with interrupt
|
|
||||||
(+) Abort DMA transfer
|
|
||||||
(+) Poll for transfer complete
|
|
||||||
(+) Handle DMA interrupt request
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Start the DMA Transfer.
|
|
||||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
||||||
* the configuration information for the specified DMA Channel.
|
|
||||||
* @param SrcAddress The source memory Buffer address
|
|
||||||
* @param DstAddress The destination memory Buffer address
|
|
||||||
* @param DataLength The length of data to be transferred from source to destination
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
|
|
||||||
{
|
|
||||||
HAL_StatusTypeDef status = HAL_OK;
|
|
||||||
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_DMA_BUFFER_SIZE(DataLength));
|
|
||||||
|
|
||||||
/* Process locked */
|
|
||||||
__HAL_LOCK(hdma);
|
|
||||||
|
|
||||||
if(HAL_DMA_STATE_READY == hdma->State)
|
|
||||||
{
|
|
||||||
/* Change DMA peripheral state */
|
|
||||||
hdma->State = HAL_DMA_STATE_BUSY;
|
|
||||||
hdma->ErrorCode = HAL_DMA_ERROR_NONE;
|
|
||||||
|
|
||||||
/* Disable the peripheral */
|
|
||||||
__HAL_DMA_DISABLE(hdma);
|
|
||||||
|
|
||||||
/* Configure the source, destination address and the data length & clear flags*/
|
|
||||||
DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
|
|
||||||
|
|
||||||
/* Enable the Peripheral */
|
|
||||||
__HAL_DMA_ENABLE(hdma);
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
/* Process Unlocked */
|
|
||||||
__HAL_UNLOCK(hdma);
|
|
||||||
status = HAL_BUSY;
|
|
||||||
}
|
|
||||||
return status;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Start the DMA Transfer with interrupt enabled.
|
|
||||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
||||||
* the configuration information for the specified DMA Channel.
|
|
||||||
* @param SrcAddress The source memory Buffer address
|
|
||||||
* @param DstAddress The destination memory Buffer address
|
|
||||||
* @param DataLength The length of data to be transferred from source to destination
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
|
|
||||||
{
|
|
||||||
HAL_StatusTypeDef status = HAL_OK;
|
|
||||||
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_DMA_BUFFER_SIZE(DataLength));
|
|
||||||
|
|
||||||
/* Process locked */
|
|
||||||
__HAL_LOCK(hdma);
|
|
||||||
|
|
||||||
if(HAL_DMA_STATE_READY == hdma->State)
|
|
||||||
{
|
|
||||||
/* Change DMA peripheral state */
|
|
||||||
hdma->State = HAL_DMA_STATE_BUSY;
|
|
||||||
hdma->ErrorCode = HAL_DMA_ERROR_NONE;
|
|
||||||
|
|
||||||
/* Disable the peripheral */
|
|
||||||
__HAL_DMA_DISABLE(hdma);
|
|
||||||
|
|
||||||
/* Configure the source, destination address and the data length & clear flags*/
|
|
||||||
DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
|
|
||||||
|
|
||||||
/* Enable the transfer complete interrupt */
|
|
||||||
/* Enable the transfer Error interrupt */
|
|
||||||
if(NULL != hdma->XferHalfCpltCallback )
|
|
||||||
{
|
|
||||||
/* Enable the Half transfer complete interrupt as well */
|
|
||||||
__HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE));
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
__HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT);
|
|
||||||
__HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_TE));
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Enable the Peripheral */
|
|
||||||
__HAL_DMA_ENABLE(hdma);
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
/* Process Unlocked */
|
|
||||||
__HAL_UNLOCK(hdma);
|
|
||||||
|
|
||||||
/* Remain BUSY */
|
|
||||||
status = HAL_BUSY;
|
|
||||||
}
|
|
||||||
return status;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Abort the DMA Transfer.
|
|
||||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
||||||
* the configuration information for the specified DMA Channel.
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma)
|
|
||||||
{
|
|
||||||
HAL_StatusTypeDef status = HAL_OK;
|
|
||||||
|
|
||||||
/* Check the DMA peripheral state */
|
|
||||||
if(hdma->State != HAL_DMA_STATE_BUSY)
|
|
||||||
{
|
|
||||||
hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
|
|
||||||
|
|
||||||
/* Process Unlocked */
|
|
||||||
__HAL_UNLOCK(hdma);
|
|
||||||
|
|
||||||
return HAL_ERROR;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
/* Disable DMA IT */
|
|
||||||
__HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE));
|
|
||||||
|
|
||||||
/* Disable the channel */
|
|
||||||
__HAL_DMA_DISABLE(hdma);
|
|
||||||
|
|
||||||
/* Clear all flags */
|
|
||||||
hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1cU));
|
|
||||||
|
|
||||||
/* Change the DMA state */
|
|
||||||
hdma->State = HAL_DMA_STATE_READY;
|
|
||||||
|
|
||||||
/* Process Unlocked */
|
|
||||||
__HAL_UNLOCK(hdma);
|
|
||||||
|
|
||||||
return status;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Aborts the DMA Transfer in Interrupt mode.
|
|
||||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
||||||
* the configuration information for the specified DMA Channel.
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma)
|
|
||||||
{
|
|
||||||
HAL_StatusTypeDef status = HAL_OK;
|
|
||||||
|
|
||||||
if(HAL_DMA_STATE_BUSY != hdma->State)
|
|
||||||
{
|
|
||||||
/* no transfer ongoing */
|
|
||||||
hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
|
|
||||||
|
|
||||||
status = HAL_ERROR;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
/* Disable DMA IT */
|
|
||||||
__HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE));
|
|
||||||
|
|
||||||
/* Disable the channel */
|
|
||||||
__HAL_DMA_DISABLE(hdma);
|
|
||||||
|
|
||||||
/* Clear all flags */
|
|
||||||
hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1cU));
|
|
||||||
|
|
||||||
/* Change the DMA state */
|
|
||||||
hdma->State = HAL_DMA_STATE_READY;
|
|
||||||
|
|
||||||
/* Process Unlocked */
|
|
||||||
__HAL_UNLOCK(hdma);
|
|
||||||
|
|
||||||
/* Call User Abort callback */
|
|
||||||
if(hdma->XferAbortCallback != NULL)
|
|
||||||
{
|
|
||||||
hdma->XferAbortCallback(hdma);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
return status;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Polling for transfer complete.
|
|
||||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
||||||
* the configuration information for the specified DMA Channel.
|
|
||||||
* @param CompleteLevel Specifies the DMA level complete.
|
|
||||||
* @param Timeout Timeout duration.
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout)
|
|
||||||
{
|
|
||||||
uint32_t temp;
|
|
||||||
uint32_t tickstart;
|
|
||||||
|
|
||||||
if(HAL_DMA_STATE_BUSY != hdma->State)
|
|
||||||
{
|
|
||||||
/* no transfer ongoing */
|
|
||||||
hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
|
|
||||||
__HAL_UNLOCK(hdma);
|
|
||||||
return HAL_ERROR;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Polling mode not supported in circular mode */
|
|
||||||
if (0U != (hdma->Instance->CCR & DMA_CCR_CIRC))
|
|
||||||
{
|
|
||||||
hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
|
|
||||||
return HAL_ERROR;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Get the level transfer complete flag */
|
|
||||||
if (HAL_DMA_FULL_TRANSFER == CompleteLevel)
|
|
||||||
{
|
|
||||||
/* Transfer Complete flag */
|
|
||||||
temp = DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1cU);
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
/* Half Transfer Complete flag */
|
|
||||||
temp = DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1cU);
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Get tick */
|
|
||||||
tickstart = HAL_GetTick();
|
|
||||||
|
|
||||||
while(0U == (hdma->DmaBaseAddress->ISR & temp))
|
|
||||||
{
|
|
||||||
if((0U != (hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << (hdma->ChannelIndex& 0x1cU)))))
|
|
||||||
{
|
|
||||||
/* When a DMA transfer error occurs */
|
|
||||||
/* A hardware clear of its EN bits is performed */
|
|
||||||
/* Clear all flags */
|
|
||||||
hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1cU));
|
|
||||||
|
|
||||||
/* Update error code */
|
|
||||||
hdma->ErrorCode = HAL_DMA_ERROR_TE;
|
|
||||||
|
|
||||||
/* Change the DMA state */
|
|
||||||
hdma->State= HAL_DMA_STATE_READY;
|
|
||||||
|
|
||||||
/* Process Unlocked */
|
|
||||||
__HAL_UNLOCK(hdma);
|
|
||||||
|
|
||||||
return HAL_ERROR;
|
|
||||||
}
|
|
||||||
/* Check for the Timeout */
|
|
||||||
if(Timeout != HAL_MAX_DELAY)
|
|
||||||
{
|
|
||||||
if(((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
|
|
||||||
{
|
|
||||||
/* Update error code */
|
|
||||||
hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
|
|
||||||
|
|
||||||
/* Change the DMA state */
|
|
||||||
hdma->State = HAL_DMA_STATE_READY;
|
|
||||||
|
|
||||||
/* Process Unlocked */
|
|
||||||
__HAL_UNLOCK(hdma);
|
|
||||||
|
|
||||||
return HAL_ERROR;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
if(HAL_DMA_FULL_TRANSFER == CompleteLevel)
|
|
||||||
{
|
|
||||||
/* Clear the transfer complete flag */
|
|
||||||
hdma->DmaBaseAddress->IFCR = (DMA_FLAG_TC1 << (hdma->ChannelIndex& 0x1cU));
|
|
||||||
|
|
||||||
/* The selected Channelx EN bit is cleared (DMA is disabled and
|
|
||||||
all transfers are complete) */
|
|
||||||
hdma->State = HAL_DMA_STATE_READY;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
/* Clear the half transfer complete flag */
|
|
||||||
hdma->DmaBaseAddress->IFCR = (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1cU));
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Process unlocked */
|
|
||||||
__HAL_UNLOCK(hdma);
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Handle DMA interrupt request.
|
|
||||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
||||||
* the configuration information for the specified DMA Channel.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
|
|
||||||
{
|
|
||||||
uint32_t flag_it = hdma->DmaBaseAddress->ISR;
|
|
||||||
uint32_t source_it = hdma->Instance->CCR;
|
|
||||||
|
|
||||||
/* Half Transfer Complete Interrupt management ******************************/
|
|
||||||
if ((0U != (flag_it & (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1cU)))) && (0U != (source_it & DMA_IT_HT)))
|
|
||||||
{
|
|
||||||
/* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */
|
|
||||||
if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U)
|
|
||||||
{
|
|
||||||
/* Disable the half transfer interrupt */
|
|
||||||
__HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT);
|
|
||||||
}
|
|
||||||
/* Clear the half transfer complete flag */
|
|
||||||
hdma->DmaBaseAddress->IFCR = DMA_ISR_HTIF1 << (hdma->ChannelIndex & 0x1cU);
|
|
||||||
|
|
||||||
/* DMA peripheral state is not updated in Half Transfer */
|
|
||||||
/* but in Transfer Complete case */
|
|
||||||
|
|
||||||
if(hdma->XferHalfCpltCallback != NULL)
|
|
||||||
{
|
|
||||||
/* Half transfer callback */
|
|
||||||
hdma->XferHalfCpltCallback(hdma);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Transfer Complete Interrupt management ***********************************/
|
|
||||||
else if ((0U != (flag_it & (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1cU)))) && (0U != (source_it & DMA_IT_TC)))
|
|
||||||
{
|
|
||||||
if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U)
|
|
||||||
{
|
|
||||||
/* Disable the transfer complete and error interrupt */
|
|
||||||
__HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE | DMA_IT_TC);
|
|
||||||
|
|
||||||
/* Change the DMA state */
|
|
||||||
hdma->State = HAL_DMA_STATE_READY;
|
|
||||||
}
|
|
||||||
/* Clear the transfer complete flag */
|
|
||||||
hdma->DmaBaseAddress->IFCR = (DMA_ISR_TCIF1 << (hdma->ChannelIndex & 0x1cU));
|
|
||||||
|
|
||||||
/* Process Unlocked */
|
|
||||||
__HAL_UNLOCK(hdma);
|
|
||||||
|
|
||||||
if(hdma->XferCpltCallback != NULL)
|
|
||||||
{
|
|
||||||
/* Transfer complete callback */
|
|
||||||
hdma->XferCpltCallback(hdma);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Transfer Error Interrupt management **************************************/
|
|
||||||
else if ((0U != (flag_it & (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1cU)))) && (0U != (source_it & DMA_IT_TE)))
|
|
||||||
{
|
|
||||||
/* When a DMA transfer error occurs */
|
|
||||||
/* A hardware clear of its EN bits is performed */
|
|
||||||
/* Disable ALL DMA IT */
|
|
||||||
__HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE));
|
|
||||||
|
|
||||||
/* Clear all flags */
|
|
||||||
hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1cU));
|
|
||||||
|
|
||||||
/* Update error code */
|
|
||||||
hdma->ErrorCode = HAL_DMA_ERROR_TE;
|
|
||||||
|
|
||||||
/* Change the DMA state */
|
|
||||||
hdma->State = HAL_DMA_STATE_READY;
|
|
||||||
|
|
||||||
/* Process Unlocked */
|
|
||||||
__HAL_UNLOCK(hdma);
|
|
||||||
|
|
||||||
if (hdma->XferErrorCallback != NULL)
|
|
||||||
{
|
|
||||||
/* Transfer error callback */
|
|
||||||
hdma->XferErrorCallback(hdma);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
/* Nothing To Do */
|
|
||||||
}
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Register callbacks
|
|
||||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
||||||
* the configuration information for the specified DMA Channel.
|
|
||||||
* @param CallbackID User Callback identifer
|
|
||||||
* a HAL_DMA_CallbackIDTypeDef ENUM as parameter.
|
|
||||||
* @param pCallback pointer to private callbacsk function which has pointer to
|
|
||||||
* a DMA_HandleTypeDef structure as parameter.
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma))
|
|
||||||
{
|
|
||||||
HAL_StatusTypeDef status = HAL_OK;
|
|
||||||
|
|
||||||
/* Process locked */
|
|
||||||
__HAL_LOCK(hdma);
|
|
||||||
|
|
||||||
if(HAL_DMA_STATE_READY == hdma->State)
|
|
||||||
{
|
|
||||||
switch (CallbackID)
|
|
||||||
{
|
|
||||||
case HAL_DMA_XFER_CPLT_CB_ID:
|
|
||||||
hdma->XferCpltCallback = pCallback;
|
|
||||||
break;
|
|
||||||
|
|
||||||
case HAL_DMA_XFER_HALFCPLT_CB_ID:
|
|
||||||
hdma->XferHalfCpltCallback = pCallback;
|
|
||||||
break;
|
|
||||||
|
|
||||||
case HAL_DMA_XFER_ERROR_CB_ID:
|
|
||||||
hdma->XferErrorCallback = pCallback;
|
|
||||||
break;
|
|
||||||
|
|
||||||
case HAL_DMA_XFER_ABORT_CB_ID:
|
|
||||||
hdma->XferAbortCallback = pCallback;
|
|
||||||
break;
|
|
||||||
|
|
||||||
default:
|
|
||||||
status = HAL_ERROR;
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
status = HAL_ERROR;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Release Lock */
|
|
||||||
__HAL_UNLOCK(hdma);
|
|
||||||
|
|
||||||
return status;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief UnRegister callbacks
|
|
||||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
||||||
* the configuration information for the specified DMA Channel.
|
|
||||||
* @param CallbackID User Callback identifer
|
|
||||||
* a HAL_DMA_CallbackIDTypeDef ENUM as parameter.
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID)
|
|
||||||
{
|
|
||||||
HAL_StatusTypeDef status = HAL_OK;
|
|
||||||
|
|
||||||
/* Process locked */
|
|
||||||
__HAL_LOCK(hdma);
|
|
||||||
|
|
||||||
if(HAL_DMA_STATE_READY == hdma->State)
|
|
||||||
{
|
|
||||||
switch (CallbackID)
|
|
||||||
{
|
|
||||||
case HAL_DMA_XFER_CPLT_CB_ID:
|
|
||||||
hdma->XferCpltCallback = NULL;
|
|
||||||
break;
|
|
||||||
|
|
||||||
case HAL_DMA_XFER_HALFCPLT_CB_ID:
|
|
||||||
hdma->XferHalfCpltCallback = NULL;
|
|
||||||
break;
|
|
||||||
|
|
||||||
case HAL_DMA_XFER_ERROR_CB_ID:
|
|
||||||
hdma->XferErrorCallback = NULL;
|
|
||||||
break;
|
|
||||||
|
|
||||||
case HAL_DMA_XFER_ABORT_CB_ID:
|
|
||||||
hdma->XferAbortCallback = NULL;
|
|
||||||
break;
|
|
||||||
|
|
||||||
case HAL_DMA_XFER_ALL_CB_ID:
|
|
||||||
hdma->XferCpltCallback = NULL;
|
|
||||||
hdma->XferHalfCpltCallback = NULL;
|
|
||||||
hdma->XferErrorCallback = NULL;
|
|
||||||
hdma->XferAbortCallback = NULL;
|
|
||||||
break;
|
|
||||||
|
|
||||||
default:
|
|
||||||
status = HAL_ERROR;
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
status = HAL_ERROR;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Release Lock */
|
|
||||||
__HAL_UNLOCK(hdma);
|
|
||||||
|
|
||||||
return status;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
/** @defgroup DMA_Exported_Functions_Group3 Peripheral State and Errors functions
|
|
||||||
* @brief Peripheral State and Errors functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
===============================================================================
|
|
||||||
##### Peripheral State and Errors functions #####
|
|
||||||
===============================================================================
|
|
||||||
[..]
|
|
||||||
This subsection provides functions allowing to
|
|
||||||
(+) Check the DMA state
|
|
||||||
(+) Get error code
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Return the DMA handle state.
|
|
||||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
||||||
* the configuration information for the specified DMA Channel.
|
|
||||||
* @retval HAL state
|
|
||||||
*/
|
|
||||||
HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma)
|
|
||||||
{
|
|
||||||
/* Return DMA handle state */
|
|
||||||
return hdma->State;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Return the DMA error code.
|
|
||||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
||||||
* the configuration information for the specified DMA Channel.
|
|
||||||
* @retval DMA Error Code
|
|
||||||
*/
|
|
||||||
uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma)
|
|
||||||
{
|
|
||||||
return hdma->ErrorCode;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup DMA_Private_Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Sets the DMA Transfer parameter.
|
|
||||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
||||||
* the configuration information for the specified DMA Channel.
|
|
||||||
* @param SrcAddress The source memory Buffer address
|
|
||||||
* @param DstAddress The destination memory Buffer address
|
|
||||||
* @param DataLength The length of data to be transferred from source to destination
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
|
|
||||||
{
|
|
||||||
/* Clear all flags */
|
|
||||||
hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1cU));
|
|
||||||
|
|
||||||
/* Configure DMA Channel data length */
|
|
||||||
hdma->Instance->CNDTR = DataLength;
|
|
||||||
|
|
||||||
/* Memory to Peripheral */
|
|
||||||
if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
|
|
||||||
{
|
|
||||||
/* Configure DMA Channel destination address */
|
|
||||||
hdma->Instance->CPAR = DstAddress;
|
|
||||||
|
|
||||||
/* Configure DMA Channel source address */
|
|
||||||
hdma->Instance->CMAR = SrcAddress;
|
|
||||||
}
|
|
||||||
/* Peripheral to Memory */
|
|
||||||
else
|
|
||||||
{
|
|
||||||
/* Configure DMA Channel source address */
|
|
||||||
hdma->Instance->CPAR = SrcAddress;
|
|
||||||
|
|
||||||
/* Configure DMA Channel destination address */
|
|
||||||
hdma->Instance->CMAR = DstAddress;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
@ -1,559 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_exti.c
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief EXTI HAL module driver.
|
|
||||||
* This file provides firmware functions to manage the following
|
|
||||||
* functionalities of the Extended Interrupts and events controller (EXTI) peripheral:
|
|
||||||
* + Initialization and de-initialization functions
|
|
||||||
* + IO operation functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
==============================================================================
|
|
||||||
##### EXTI Peripheral features #####
|
|
||||||
==============================================================================
|
|
||||||
[..]
|
|
||||||
(+) Each Exti line can be configured within this driver.
|
|
||||||
|
|
||||||
(+) Exti line can be configured in 3 different modes
|
|
||||||
(++) Interrupt
|
|
||||||
(++) Event
|
|
||||||
(++) Both of them
|
|
||||||
|
|
||||||
(+) Configurable Exti lines can be configured with 3 different triggers
|
|
||||||
(++) Rising
|
|
||||||
(++) Falling
|
|
||||||
(++) Both of them
|
|
||||||
|
|
||||||
(+) When set in interrupt mode, configurable Exti lines have two different
|
|
||||||
interrupts pending registers which allow to distinguish which transition
|
|
||||||
occurs:
|
|
||||||
(++) Rising edge pending interrupt
|
|
||||||
(++) Falling
|
|
||||||
|
|
||||||
(+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can
|
|
||||||
be selected through multiplexer.
|
|
||||||
|
|
||||||
##### How to use this driver #####
|
|
||||||
==============================================================================
|
|
||||||
[..]
|
|
||||||
|
|
||||||
(#) Configure the EXTI line using HAL_EXTI_SetConfigLine().
|
|
||||||
(++) Choose the interrupt line number by setting "Line" member from
|
|
||||||
EXTI_ConfigTypeDef structure.
|
|
||||||
(++) Configure the interrupt and/or event mode using "Mode" member from
|
|
||||||
EXTI_ConfigTypeDef structure.
|
|
||||||
(++) For configurable lines, configure rising and/or falling trigger
|
|
||||||
"Trigger" member from EXTI_ConfigTypeDef structure.
|
|
||||||
(++) For Exti lines linked to gpio, choose gpio port using "GPIOSel"
|
|
||||||
member from GPIO_InitTypeDef structure.
|
|
||||||
|
|
||||||
(#) Get current Exti configuration of a dedicated line using
|
|
||||||
HAL_EXTI_GetConfigLine().
|
|
||||||
(++) Provide exiting handle as parameter.
|
|
||||||
(++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter.
|
|
||||||
|
|
||||||
(#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine().
|
|
||||||
(++) Provide exiting handle as parameter.
|
|
||||||
|
|
||||||
(#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback().
|
|
||||||
(++) Provide exiting handle as first parameter.
|
|
||||||
(++) Provide which callback will be registered using one value from
|
|
||||||
EXTI_CallbackIDTypeDef.
|
|
||||||
(++) Provide callback function pointer.
|
|
||||||
|
|
||||||
(#) Get interrupt pending bit using HAL_EXTI_GetPending().
|
|
||||||
|
|
||||||
(#) Clear interrupt pending bit using HAL_EXTI_GetPending().
|
|
||||||
|
|
||||||
(#) Generate software interrupt using HAL_EXTI_GenerateSWI().
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup EXTI
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/** MISRA C:2012 deviation rule has been granted for following rule:
|
|
||||||
* Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out
|
|
||||||
* of bounds [0,3] in following API :
|
|
||||||
* HAL_EXTI_SetConfigLine
|
|
||||||
* HAL_EXTI_GetConfigLine
|
|
||||||
* HAL_EXTI_ClearConfigLine
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
|
||||||
|
|
||||||
/* Private typedef -----------------------------------------------------------*/
|
|
||||||
/* Private defines -----------------------------------------------------------*/
|
|
||||||
/** @defgroup EXTI_Private_Constants EXTI Private Constants
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Private macros ------------------------------------------------------------*/
|
|
||||||
/* Private variables ---------------------------------------------------------*/
|
|
||||||
/* Private function prototypes -----------------------------------------------*/
|
|
||||||
/* Exported functions --------------------------------------------------------*/
|
|
||||||
|
|
||||||
/** @addtogroup EXTI_Exported_Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup EXTI_Exported_Functions_Group1
|
|
||||||
* @brief Configuration functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
===============================================================================
|
|
||||||
##### Configuration functions #####
|
|
||||||
===============================================================================
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Set configuration of a dedicated Exti line.
|
|
||||||
* @param hexti Exti handle.
|
|
||||||
* @param pExtiConfig Pointer on EXTI configuration to be set.
|
|
||||||
* @retval HAL Status.
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig)
|
|
||||||
{
|
|
||||||
uint32_t regval;
|
|
||||||
uint32_t linepos;
|
|
||||||
uint32_t maskline;
|
|
||||||
|
|
||||||
/* Check null pointer */
|
|
||||||
if ((hexti == NULL) || (pExtiConfig == NULL))
|
|
||||||
{
|
|
||||||
return HAL_ERROR;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Check parameters */
|
|
||||||
assert_param(IS_EXTI_LINE(pExtiConfig->Line));
|
|
||||||
assert_param(IS_EXTI_MODE(pExtiConfig->Mode));
|
|
||||||
|
|
||||||
/* Assign line number to handle */
|
|
||||||
hexti->Line = pExtiConfig->Line;
|
|
||||||
|
|
||||||
/* Compute line mask */
|
|
||||||
linepos = (pExtiConfig->Line & EXTI_PIN_MASK);
|
|
||||||
maskline = (1uL << linepos);
|
|
||||||
|
|
||||||
/* Configure triggers for configurable lines */
|
|
||||||
if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u)
|
|
||||||
{
|
|
||||||
assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger));
|
|
||||||
|
|
||||||
/* Configure rising trigger */
|
|
||||||
/* Mask or set line */
|
|
||||||
if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00u)
|
|
||||||
{
|
|
||||||
EXTI->RTSR |= maskline;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
EXTI->RTSR &= ~maskline;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Configure falling trigger */
|
|
||||||
/* Mask or set line */
|
|
||||||
if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00u)
|
|
||||||
{
|
|
||||||
EXTI->FTSR |= maskline;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
EXTI->FTSR &= ~maskline;
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
/* Configure gpio port selection in case of gpio exti line */
|
|
||||||
if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO)
|
|
||||||
{
|
|
||||||
assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel));
|
|
||||||
assert_param(IS_EXTI_GPIO_PIN(linepos));
|
|
||||||
|
|
||||||
regval = SYSCFG->EXTICR[linepos >> 2u];
|
|
||||||
regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
|
|
||||||
regval |= (pExtiConfig->GPIOSel << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
|
|
||||||
SYSCFG->EXTICR[linepos >> 2u] = regval;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Configure interrupt mode : read current mode */
|
|
||||||
/* Mask or set line */
|
|
||||||
if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00u)
|
|
||||||
{
|
|
||||||
EXTI->IMR |= maskline;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
EXTI->IMR &= ~maskline;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Configure event mode : read current mode */
|
|
||||||
/* Mask or set line */
|
|
||||||
if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00u)
|
|
||||||
{
|
|
||||||
EXTI->EMR |= maskline;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
EXTI->EMR &= ~maskline;
|
|
||||||
}
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Get configuration of a dedicated Exti line.
|
|
||||||
* @param hexti Exti handle.
|
|
||||||
* @param pExtiConfig Pointer on structure to store Exti configuration.
|
|
||||||
* @retval HAL Status.
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig)
|
|
||||||
{
|
|
||||||
uint32_t regval;
|
|
||||||
uint32_t linepos;
|
|
||||||
uint32_t maskline;
|
|
||||||
|
|
||||||
/* Check null pointer */
|
|
||||||
if ((hexti == NULL) || (pExtiConfig == NULL))
|
|
||||||
{
|
|
||||||
return HAL_ERROR;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Check the parameter */
|
|
||||||
assert_param(IS_EXTI_LINE(hexti->Line));
|
|
||||||
|
|
||||||
/* Store handle line number to configuration structure */
|
|
||||||
pExtiConfig->Line = hexti->Line;
|
|
||||||
|
|
||||||
/* Compute line mask */
|
|
||||||
linepos = (pExtiConfig->Line & EXTI_PIN_MASK);
|
|
||||||
maskline = (1uL << linepos);
|
|
||||||
|
|
||||||
/* 1] Get core mode : interrupt */
|
|
||||||
|
|
||||||
/* Check if selected line is enable */
|
|
||||||
if ((EXTI->IMR & maskline) != 0x00u)
|
|
||||||
{
|
|
||||||
pExtiConfig->Mode = EXTI_MODE_INTERRUPT;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
pExtiConfig->Mode = EXTI_MODE_NONE;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Get event mode */
|
|
||||||
/* Check if selected line is enable */
|
|
||||||
if ((EXTI->EMR & maskline) != 0x00u)
|
|
||||||
{
|
|
||||||
pExtiConfig->Mode |= EXTI_MODE_EVENT;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* 2] Get trigger for configurable lines : rising */
|
|
||||||
if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u)
|
|
||||||
{
|
|
||||||
/* Check if configuration of selected line is enable */
|
|
||||||
if ((EXTI->RTSR & maskline) != 0x00u)
|
|
||||||
{
|
|
||||||
pExtiConfig->Trigger = EXTI_TRIGGER_RISING;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Get falling configuration */
|
|
||||||
/* Check if configuration of selected line is enable */
|
|
||||||
if ((EXTI->FTSR & maskline) != 0x00u)
|
|
||||||
{
|
|
||||||
pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Get Gpio port selection for gpio lines */
|
|
||||||
if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO)
|
|
||||||
{
|
|
||||||
assert_param(IS_EXTI_GPIO_PIN(linepos));
|
|
||||||
|
|
||||||
regval = SYSCFG->EXTICR[linepos >> 2u];
|
|
||||||
pExtiConfig->GPIOSel = ((regval << (SYSCFG_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 24);
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
pExtiConfig->GPIOSel = 0x00u;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
/* No Trigger selected */
|
|
||||||
pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
|
|
||||||
pExtiConfig->GPIOSel = 0x00u;
|
|
||||||
}
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Clear whole configuration of a dedicated Exti line.
|
|
||||||
* @param hexti Exti handle.
|
|
||||||
* @retval HAL Status.
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti)
|
|
||||||
{
|
|
||||||
uint32_t regval;
|
|
||||||
uint32_t linepos;
|
|
||||||
uint32_t maskline;
|
|
||||||
|
|
||||||
/* Check null pointer */
|
|
||||||
if (hexti == NULL)
|
|
||||||
{
|
|
||||||
return HAL_ERROR;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Check the parameter */
|
|
||||||
assert_param(IS_EXTI_LINE(hexti->Line));
|
|
||||||
|
|
||||||
/* compute line mask */
|
|
||||||
linepos = (hexti->Line & EXTI_PIN_MASK);
|
|
||||||
maskline = (1uL << linepos);
|
|
||||||
|
|
||||||
/* 1] Clear interrupt mode */
|
|
||||||
EXTI->IMR = (EXTI->IMR & ~maskline);
|
|
||||||
|
|
||||||
/* 2] Clear event mode */
|
|
||||||
EXTI->EMR = (EXTI->EMR & ~maskline);
|
|
||||||
|
|
||||||
/* 3] Clear triggers in case of configurable lines */
|
|
||||||
if ((hexti->Line & EXTI_CONFIG) != 0x00u)
|
|
||||||
{
|
|
||||||
EXTI->RTSR = (EXTI->RTSR & ~maskline);
|
|
||||||
EXTI->FTSR = (EXTI->FTSR & ~maskline);
|
|
||||||
|
|
||||||
/* Get Gpio port selection for gpio lines */
|
|
||||||
if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO)
|
|
||||||
{
|
|
||||||
assert_param(IS_EXTI_GPIO_PIN(linepos));
|
|
||||||
|
|
||||||
regval = SYSCFG->EXTICR[linepos >> 2u];
|
|
||||||
regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u)));
|
|
||||||
SYSCFG->EXTICR[linepos >> 2u] = regval;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Register callback for a dedicated Exti line.
|
|
||||||
* @param hexti Exti handle.
|
|
||||||
* @param CallbackID User callback identifier.
|
|
||||||
* This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values.
|
|
||||||
* @param pPendingCbfn function pointer to be stored as callback.
|
|
||||||
* @retval HAL Status.
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void))
|
|
||||||
{
|
|
||||||
HAL_StatusTypeDef status = HAL_OK;
|
|
||||||
|
|
||||||
switch (CallbackID)
|
|
||||||
{
|
|
||||||
case HAL_EXTI_COMMON_CB_ID:
|
|
||||||
hexti->PendingCallback = pPendingCbfn;
|
|
||||||
break;
|
|
||||||
|
|
||||||
default:
|
|
||||||
status = HAL_ERROR;
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
|
|
||||||
return status;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Store line number as handle private field.
|
|
||||||
* @param hexti Exti handle.
|
|
||||||
* @param ExtiLine Exti line number.
|
|
||||||
* This parameter can be from 0 to @ref EXTI_LINE_NB.
|
|
||||||
* @retval HAL Status.
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine)
|
|
||||||
{
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_EXTI_LINE(ExtiLine));
|
|
||||||
|
|
||||||
/* Check null pointer */
|
|
||||||
if (hexti == NULL)
|
|
||||||
{
|
|
||||||
return HAL_ERROR;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
/* Store line number as handle private field */
|
|
||||||
hexti->Line = ExtiLine;
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup EXTI_Exported_Functions_Group2
|
|
||||||
* @brief EXTI IO functions.
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
===============================================================================
|
|
||||||
##### IO operation functions #####
|
|
||||||
===============================================================================
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Handle EXTI interrupt request.
|
|
||||||
* @param hexti Exti handle.
|
|
||||||
* @retval none.
|
|
||||||
*/
|
|
||||||
void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti)
|
|
||||||
{
|
|
||||||
uint32_t regval;
|
|
||||||
uint32_t maskline;
|
|
||||||
|
|
||||||
/* Compute line mask */
|
|
||||||
maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
|
|
||||||
|
|
||||||
/* Get pending bit */
|
|
||||||
regval = (EXTI->PR & maskline);
|
|
||||||
if (regval != 0x00u)
|
|
||||||
{
|
|
||||||
/* Clear pending bit */
|
|
||||||
EXTI->PR = maskline;
|
|
||||||
|
|
||||||
/* Call callback */
|
|
||||||
if (hexti->PendingCallback != NULL)
|
|
||||||
{
|
|
||||||
hexti->PendingCallback();
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Get interrupt pending bit of a dedicated line.
|
|
||||||
* @param hexti Exti handle.
|
|
||||||
* @param Edge Specify which pending edge as to be checked.
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg @ref EXTI_TRIGGER_RISING_FALLING
|
|
||||||
* This parameter is kept for compatibility with other series.
|
|
||||||
* @retval 1 if interrupt is pending else 0.
|
|
||||||
*/
|
|
||||||
uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
|
|
||||||
{
|
|
||||||
uint32_t regval;
|
|
||||||
uint32_t linepos;
|
|
||||||
uint32_t maskline;
|
|
||||||
|
|
||||||
/* Check parameters */
|
|
||||||
assert_param(IS_EXTI_LINE(hexti->Line));
|
|
||||||
assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
|
|
||||||
assert_param(IS_EXTI_PENDING_EDGE(Edge));
|
|
||||||
|
|
||||||
/* Compute line mask */
|
|
||||||
linepos = (hexti->Line & EXTI_PIN_MASK);
|
|
||||||
maskline = (1uL << linepos);
|
|
||||||
|
|
||||||
/* return 1 if bit is set else 0 */
|
|
||||||
regval = ((EXTI->PR & maskline) >> linepos);
|
|
||||||
return regval;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Clear interrupt pending bit of a dedicated line.
|
|
||||||
* @param hexti Exti handle.
|
|
||||||
* @param Edge Specify which pending edge as to be clear.
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg @ref EXTI_TRIGGER_RISING_FALLING
|
|
||||||
* This parameter is kept for compatibility with other series.
|
|
||||||
* @retval None.
|
|
||||||
*/
|
|
||||||
void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge)
|
|
||||||
{
|
|
||||||
uint32_t maskline;
|
|
||||||
|
|
||||||
/* Check parameters */
|
|
||||||
assert_param(IS_EXTI_LINE(hexti->Line));
|
|
||||||
assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
|
|
||||||
assert_param(IS_EXTI_PENDING_EDGE(Edge));
|
|
||||||
|
|
||||||
/* Compute line mask */
|
|
||||||
maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
|
|
||||||
|
|
||||||
/* Clear Pending bit */
|
|
||||||
EXTI->PR = maskline;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Generate a software interrupt for a dedicated line.
|
|
||||||
* @param hexti Exti handle.
|
|
||||||
* @retval None.
|
|
||||||
*/
|
|
||||||
void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti)
|
|
||||||
{
|
|
||||||
uint32_t maskline;
|
|
||||||
|
|
||||||
/* Check parameters */
|
|
||||||
assert_param(IS_EXTI_LINE(hexti->Line));
|
|
||||||
assert_param(IS_EXTI_CONFIG_LINE(hexti->Line));
|
|
||||||
|
|
||||||
/* Compute line mask */
|
|
||||||
maskline = (1uL << (hexti->Line & EXTI_PIN_MASK));
|
|
||||||
|
|
||||||
/* Generate Software interrupt */
|
|
||||||
EXTI->SWIER = maskline;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
@ -1,769 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_flash.c
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief FLASH HAL module driver.
|
|
||||||
* This file provides firmware functions to manage the following
|
|
||||||
* functionalities of the internal FLASH memory:
|
|
||||||
* + Program operations functions
|
|
||||||
* + Memory Control functions
|
|
||||||
* + Peripheral State functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
==============================================================================
|
|
||||||
##### FLASH peripheral features #####
|
|
||||||
==============================================================================
|
|
||||||
[..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses
|
|
||||||
to the Flash memory. It implements the erase and program Flash memory operations
|
|
||||||
and the read and write protection mechanisms.
|
|
||||||
|
|
||||||
[..] The Flash memory interface accelerates code execution with a system of instruction
|
|
||||||
prefetch.
|
|
||||||
|
|
||||||
[..] The FLASH main features are:
|
|
||||||
(+) Flash memory read operations
|
|
||||||
(+) Flash memory program/erase operations
|
|
||||||
(+) Read / write protections
|
|
||||||
(+) Prefetch on I-Code
|
|
||||||
(+) Option Bytes programming
|
|
||||||
|
|
||||||
|
|
||||||
##### How to use this driver #####
|
|
||||||
==============================================================================
|
|
||||||
[..]
|
|
||||||
This driver provides functions and macros to configure and program the FLASH
|
|
||||||
memory of all STM32L0xx devices.
|
|
||||||
|
|
||||||
(#) FLASH Memory I/O Programming functions: this group includes all needed
|
|
||||||
functions to erase and program the main memory:
|
|
||||||
(++) Lock and Unlock the FLASH interface
|
|
||||||
(++) Erase function: Erase page
|
|
||||||
(++) Program functions: Fast Word and Half Page(should be
|
|
||||||
executed from internal SRAM).
|
|
||||||
|
|
||||||
(#) DATA EEPROM Programming functions: this group includes all
|
|
||||||
needed functions to erase and program the DATA EEPROM memory:
|
|
||||||
(++) Lock and Unlock the DATA EEPROM interface.
|
|
||||||
(++) Erase function: Erase Byte, erase HalfWord, erase Word, erase
|
|
||||||
Double Word (should be executed from internal SRAM).
|
|
||||||
(++) Program functions: Fast Program Byte, Fast Program Half-Word,
|
|
||||||
FastProgramWord, Program Byte, Program Half-Word,
|
|
||||||
Program Word and Program Double-Word (should be executed
|
|
||||||
from internal SRAM).
|
|
||||||
|
|
||||||
(#) FLASH Option Bytes Programming functions: this group includes all needed
|
|
||||||
functions to manage the Option Bytes:
|
|
||||||
(++) Lock and Unlock the Option Bytes
|
|
||||||
(++) Set/Reset the write protection
|
|
||||||
(++) Set the Read protection Level
|
|
||||||
(++) Program the user Option Bytes
|
|
||||||
(++) Launch the Option Bytes loader
|
|
||||||
(++) Set/Get the Read protection Level.
|
|
||||||
(++) Set/Get the BOR level.
|
|
||||||
(++) Get the Write protection.
|
|
||||||
(++) Get the user option bytes.
|
|
||||||
|
|
||||||
(#) Interrupts and flags management functions : this group
|
|
||||||
includes all needed functions to:
|
|
||||||
(++) Handle FLASH interrupts
|
|
||||||
(++) Wait for last FLASH operation according to its status
|
|
||||||
(++) Get error flag status
|
|
||||||
|
|
||||||
(#) FLASH Interface configuration functions: this group includes
|
|
||||||
the management of following features:
|
|
||||||
(++) Enable/Disable the RUN PowerDown mode.
|
|
||||||
(++) Enable/Disable the SLEEP PowerDown mode.
|
|
||||||
|
|
||||||
(#) FLASH Peripheral State methods: this group includes
|
|
||||||
the management of following features:
|
|
||||||
(++) Wait for the FLASH operation
|
|
||||||
(++) Get the specific FLASH error flag
|
|
||||||
|
|
||||||
[..] In addition to these function, this driver includes a set of macros allowing
|
|
||||||
to handle the following operations:
|
|
||||||
|
|
||||||
(+) Set/Get the latency
|
|
||||||
(+) Enable/Disable the prefetch buffer
|
|
||||||
(+) Enable/Disable the preread buffer
|
|
||||||
(+) Enable/Disable the Flash power-down
|
|
||||||
(+) Enable/Disable the FLASH interrupts
|
|
||||||
(+) Monitor the FLASH flags status
|
|
||||||
|
|
||||||
##### Programming operation functions #####
|
|
||||||
===============================================================================
|
|
||||||
[..]
|
|
||||||
This subsection provides a set of functions allowing to manage the FLASH
|
|
||||||
program operations.
|
|
||||||
|
|
||||||
[..] The FLASH Memory Programming functions, includes the following functions:
|
|
||||||
(+) HAL_FLASH_Unlock(void);
|
|
||||||
(+) HAL_FLASH_Lock(void);
|
|
||||||
(+) HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint32_t Data)
|
|
||||||
(+) HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint32_t Data)
|
|
||||||
|
|
||||||
[..] Any operation of erase or program should follow these steps:
|
|
||||||
(#) Call the HAL_FLASH_Unlock() function to enable the flash control register and
|
|
||||||
program memory access.
|
|
||||||
(#) Call the desired function to erase page or program data.
|
|
||||||
(#) Call the HAL_FLASH_Lock() to disable the flash program memory access
|
|
||||||
(recommended to protect the FLASH memory against possible unwanted operation).
|
|
||||||
|
|
||||||
##### Option Bytes Programming functions #####
|
|
||||||
==============================================================================
|
|
||||||
|
|
||||||
[..] The FLASH_Option Bytes Programming_functions, includes the following functions:
|
|
||||||
(+) HAL_FLASH_OB_Unlock(void);
|
|
||||||
(+) HAL_FLASH_OB_Lock(void);
|
|
||||||
(+) HAL_FLASH_OB_Launch(void);
|
|
||||||
(+) HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
|
|
||||||
(+) HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
|
|
||||||
|
|
||||||
[..] Any operation of erase or program should follow these steps:
|
|
||||||
(#) Call the HAL_FLASH_OB_Unlock() function to enable the Flash option control
|
|
||||||
register access.
|
|
||||||
(#) Call the following functions to program the desired option bytes.
|
|
||||||
(++) HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
|
|
||||||
(#) Once all needed option bytes to be programmed are correctly written, call the
|
|
||||||
HAL_FLASH_OB_Launch(void) function to launch the Option Bytes programming process.
|
|
||||||
(#) Call the HAL_FLASH_OB_Lock() to disable the Flash option control register access (recommended
|
|
||||||
to protect the option Bytes against possible unwanted operations).
|
|
||||||
|
|
||||||
[..] Proprietary code Read Out Protection (PcROP):
|
|
||||||
(#) The PcROP sector is selected by using the same option bytes as the Write
|
|
||||||
protection. As a result, these 2 options are exclusive each other.
|
|
||||||
(#) To activate PCROP mode for Flash sectors(s), you need to follow the sequence below:
|
|
||||||
(++) Use this function HAL_FLASHEx_AdvOBProgram with PCROPState = OB_PCROP_STATE_ENABLE.
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
|
||||||
|
|
||||||
/** @defgroup FLASH FLASH
|
|
||||||
* @brief FLASH HAL module driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Private typedef -----------------------------------------------------------*/
|
|
||||||
/* Private define ------------------------------------------------------------*/
|
|
||||||
/** @defgroup FLASH_Private_Constants FLASH Private Constants
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Private macro ---------------------------- ---------------------------------*/
|
|
||||||
/** @defgroup FLASH_Private_Macros FLASH Private Macros
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Private variables ---------------------------------------------------------*/
|
|
||||||
/** @defgroup FLASH_Private_Variables FLASH Private Variables
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/* Variables used for Erase pages under interruption*/
|
|
||||||
FLASH_ProcessTypeDef pFlash;
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Private function prototypes -----------------------------------------------*/
|
|
||||||
/** @defgroup FLASH_Private_Functions FLASH Private Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
static void FLASH_SetErrorCode(void);
|
|
||||||
extern void FLASH_PageErase(uint32_t PageAddress);
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Exported functions ---------------------------------------------------------*/
|
|
||||||
/** @defgroup FLASH_Exported_Functions FLASH Exported Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions
|
|
||||||
* @brief Programming operation functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Program word at a specified address
|
|
||||||
* @note To correctly run this function, the HAL_FLASH_Unlock() function
|
|
||||||
* must be called before.
|
|
||||||
* Call the HAL_FLASH_Lock() to disable the flash memory access
|
|
||||||
* (recommended to protect the FLASH memory against possible unwanted operation).
|
|
||||||
*
|
|
||||||
* @param TypeProgram Indicate the way to program at a specified address.
|
|
||||||
* This parameter can be a value of @ref FLASH_Type_Program
|
|
||||||
* @param Address Specifie the address to be programmed.
|
|
||||||
* @param Data Specifie the data to be programmed
|
|
||||||
*
|
|
||||||
* @retval HAL_StatusTypeDef HAL Status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint32_t Data)
|
|
||||||
{
|
|
||||||
HAL_StatusTypeDef status = HAL_ERROR;
|
|
||||||
|
|
||||||
/* Process Locked */
|
|
||||||
__HAL_LOCK(&pFlash);
|
|
||||||
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
|
|
||||||
assert_param(IS_FLASH_PROGRAM_ADDRESS(Address));
|
|
||||||
|
|
||||||
/* Wait for last operation to be completed */
|
|
||||||
status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
|
|
||||||
|
|
||||||
if(status == HAL_OK)
|
|
||||||
{
|
|
||||||
/* Clean the error context */
|
|
||||||
pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
|
|
||||||
|
|
||||||
/*Program word (32-bit) at a specified address.*/
|
|
||||||
*(__IO uint32_t *)Address = Data;
|
|
||||||
|
|
||||||
/* Wait for last operation to be completed */
|
|
||||||
status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Process Unlocked */
|
|
||||||
__HAL_UNLOCK(&pFlash);
|
|
||||||
|
|
||||||
return status;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Program word at a specified address with interrupt enabled.
|
|
||||||
*
|
|
||||||
* @param TypeProgram Indicate the way to program at a specified address.
|
|
||||||
* This parameter can be a value of @ref FLASH_Type_Program
|
|
||||||
* @param Address Specifie the address to be programmed.
|
|
||||||
* @param Data Specifie the data to be programmed
|
|
||||||
*
|
|
||||||
* @retval HAL_StatusTypeDef HAL Status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint32_t Data)
|
|
||||||
{
|
|
||||||
HAL_StatusTypeDef status = HAL_OK;
|
|
||||||
|
|
||||||
/* Process Locked */
|
|
||||||
__HAL_LOCK(&pFlash);
|
|
||||||
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
|
|
||||||
assert_param(IS_FLASH_PROGRAM_ADDRESS(Address));
|
|
||||||
|
|
||||||
/* Enable End of FLASH Operation and Error source interrupts */
|
|
||||||
__HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR);
|
|
||||||
|
|
||||||
pFlash.Address = Address;
|
|
||||||
pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM;
|
|
||||||
/* Clean the error context */
|
|
||||||
pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
|
|
||||||
|
|
||||||
if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
|
|
||||||
{
|
|
||||||
/* Program word (32-bit) at a specified address. */
|
|
||||||
*(__IO uint32_t *)Address = Data;
|
|
||||||
}
|
|
||||||
return status;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief This function handles FLASH interrupt request.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_FLASH_IRQHandler(void)
|
|
||||||
{
|
|
||||||
uint32_t addresstmp = 0;
|
|
||||||
|
|
||||||
/* Check FLASH operation error flags */
|
|
||||||
|
|
||||||
/* WARNING : On the first cut of STM32L031xx and STM32L041xx devices,
|
|
||||||
* (RefID = 0x1000) the FLASH_FLAG_OPTVERR bit was not behaving
|
|
||||||
* as expected. If the user run an application using the first
|
|
||||||
* cut of the STM32L031xx device or the first cut of the STM32L041xx
|
|
||||||
* device, the check on the FLASH_FLAG_OPTVERR bit should be ignored.
|
|
||||||
*
|
|
||||||
* Note :The revId of the device can be retrieved via the HAL_GetREVID()
|
|
||||||
* function.
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
|
|
||||||
if( __HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) ||
|
|
||||||
__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) ||
|
|
||||||
__HAL_FLASH_GET_FLAG(FLASH_FLAG_SIZERR) ||
|
|
||||||
__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR) ||
|
|
||||||
__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) ||
|
|
||||||
__HAL_FLASH_GET_FLAG(FLASH_FLAG_FWWERR) ||
|
|
||||||
__HAL_FLASH_GET_FLAG(FLASH_FLAG_NOTZEROERR) )
|
|
||||||
{
|
|
||||||
if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGEERASE)
|
|
||||||
{
|
|
||||||
/* Return the faulty sector */
|
|
||||||
addresstmp = pFlash.Page;
|
|
||||||
pFlash.Page = 0xFFFFFFFFU;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
/* Return the faulty address */
|
|
||||||
addresstmp = pFlash.Address;
|
|
||||||
}
|
|
||||||
/* Save the Error code */
|
|
||||||
FLASH_SetErrorCode();
|
|
||||||
|
|
||||||
/* FLASH error interrupt user callback */
|
|
||||||
HAL_FLASH_OperationErrorCallback(addresstmp);
|
|
||||||
|
|
||||||
/* Stop the procedure ongoing */
|
|
||||||
pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Check FLASH End of Operation flag */
|
|
||||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP))
|
|
||||||
{
|
|
||||||
/* Clear FLASH End of Operation pending bit */
|
|
||||||
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
|
|
||||||
|
|
||||||
/* Process can continue only if no error detected */
|
|
||||||
if(pFlash.ProcedureOnGoing != FLASH_PROC_NONE)
|
|
||||||
{
|
|
||||||
if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGEERASE)
|
|
||||||
{
|
|
||||||
/* Nb of pages to erased can be decreased */
|
|
||||||
pFlash.NbPagesToErase--;
|
|
||||||
|
|
||||||
/* Check if there are still pages to erase */
|
|
||||||
if(pFlash.NbPagesToErase != 0U)
|
|
||||||
{
|
|
||||||
addresstmp = pFlash.Page;
|
|
||||||
/*Indicate user which sector has been erased */
|
|
||||||
HAL_FLASH_EndOfOperationCallback(addresstmp);
|
|
||||||
|
|
||||||
/*Increment sector number*/
|
|
||||||
addresstmp = pFlash.Page + FLASH_PAGE_SIZE;
|
|
||||||
pFlash.Page = addresstmp;
|
|
||||||
|
|
||||||
/* If the erase operation is completed, disable the ERASE Bit */
|
|
||||||
CLEAR_BIT(FLASH->PECR, FLASH_PECR_ERASE);
|
|
||||||
|
|
||||||
FLASH_PageErase(addresstmp);
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
/* No more pages to Erase, user callback can be called. */
|
|
||||||
/* Reset Sector and stop Erase pages procedure */
|
|
||||||
pFlash.Page = addresstmp = 0xFFFFFFFFU;
|
|
||||||
pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
|
|
||||||
/* FLASH EOP interrupt user callback */
|
|
||||||
HAL_FLASH_EndOfOperationCallback(addresstmp);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
/* If the program operation is completed, disable the PROG Bit */
|
|
||||||
CLEAR_BIT(FLASH->PECR, FLASH_PECR_PROG);
|
|
||||||
|
|
||||||
/* Program ended. Return the selected address */
|
|
||||||
/* FLASH EOP interrupt user callback */
|
|
||||||
HAL_FLASH_EndOfOperationCallback(pFlash.Address);
|
|
||||||
|
|
||||||
/* Reset Address and stop Program procedure */
|
|
||||||
pFlash.Address = 0xFFFFFFFFU;
|
|
||||||
pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE)
|
|
||||||
{
|
|
||||||
/* Operation is completed, disable the PROG and ERASE */
|
|
||||||
CLEAR_BIT(FLASH->PECR, (FLASH_PECR_ERASE | FLASH_PECR_PROG));
|
|
||||||
|
|
||||||
/* Disable End of FLASH Operation and Error source interrupts */
|
|
||||||
__HAL_FLASH_DISABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR);
|
|
||||||
|
|
||||||
/* Process Unlocked */
|
|
||||||
__HAL_UNLOCK(&pFlash);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief FLASH end of operation interrupt callback
|
|
||||||
* @param ReturnValue The value saved in this parameter depends on the ongoing procedure
|
|
||||||
* - Pages Erase: Address of the page which has been erased
|
|
||||||
* (if 0xFFFFFFFF, it means that all the selected pages have been erased)
|
|
||||||
* - Program: Address which was selected for data program
|
|
||||||
* @retval none
|
|
||||||
*/
|
|
||||||
__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
|
|
||||||
{
|
|
||||||
/* Prevent unused argument(s) compilation warning */
|
|
||||||
UNUSED(ReturnValue);
|
|
||||||
|
|
||||||
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
||||||
the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
|
|
||||||
*/
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief FLASH operation error interrupt callback
|
|
||||||
* @param ReturnValue The value saved in this parameter depends on the ongoing procedure
|
|
||||||
* - Pages Erase: Address of the page which returned an error
|
|
||||||
* - Program: Address which was selected for data program
|
|
||||||
* @retval none
|
|
||||||
*/
|
|
||||||
__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
|
|
||||||
{
|
|
||||||
/* Prevent unused argument(s) compilation warning */
|
|
||||||
UNUSED(ReturnValue);
|
|
||||||
|
|
||||||
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
||||||
the HAL_FLASH_OperationErrorCallback could be implemented in the user file
|
|
||||||
*/
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions
|
|
||||||
* @brief management functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
===============================================================================
|
|
||||||
##### Peripheral Control functions #####
|
|
||||||
===============================================================================
|
|
||||||
[..]
|
|
||||||
This subsection provides a set of functions allowing to control the FLASH
|
|
||||||
memory operations.
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Unlock the FLASH control register access
|
|
||||||
* @retval HAL Status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_FLASH_Unlock(void)
|
|
||||||
{
|
|
||||||
uint32_t primask_bit;
|
|
||||||
|
|
||||||
/* Unlocking FLASH_PECR register access*/
|
|
||||||
if(HAL_IS_BIT_SET(FLASH->PECR, FLASH_PECR_PELOCK))
|
|
||||||
{
|
|
||||||
/* Disable interrupts to avoid any interruption during unlock sequence */
|
|
||||||
primask_bit = __get_PRIMASK();
|
|
||||||
__disable_irq();
|
|
||||||
|
|
||||||
WRITE_REG(FLASH->PEKEYR, FLASH_PEKEY1);
|
|
||||||
WRITE_REG(FLASH->PEKEYR, FLASH_PEKEY2);
|
|
||||||
|
|
||||||
/* Re-enable the interrupts: restore previous priority mask */
|
|
||||||
__set_PRIMASK(primask_bit);
|
|
||||||
|
|
||||||
if(HAL_IS_BIT_SET(FLASH->PECR, FLASH_PECR_PELOCK))
|
|
||||||
{
|
|
||||||
return HAL_ERROR;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
if (HAL_IS_BIT_SET(FLASH->PECR, FLASH_PECR_PRGLOCK))
|
|
||||||
{
|
|
||||||
/* Disable interrupts to avoid any interruption during unlock sequence */
|
|
||||||
primask_bit = __get_PRIMASK();
|
|
||||||
__disable_irq();
|
|
||||||
|
|
||||||
/* Unlocking the program memory access */
|
|
||||||
WRITE_REG(FLASH->PRGKEYR, FLASH_PRGKEY1);
|
|
||||||
WRITE_REG(FLASH->PRGKEYR, FLASH_PRGKEY2);
|
|
||||||
|
|
||||||
/* Re-enable the interrupts: restore previous priority mask */
|
|
||||||
__set_PRIMASK(primask_bit);
|
|
||||||
|
|
||||||
if (HAL_IS_BIT_SET(FLASH->PECR, FLASH_PECR_PRGLOCK))
|
|
||||||
{
|
|
||||||
return HAL_ERROR;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Locks the FLASH control register access
|
|
||||||
* @retval HAL Status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_FLASH_Lock(void)
|
|
||||||
{
|
|
||||||
/* Set the PRGLOCK Bit to lock the FLASH Registers access */
|
|
||||||
SET_BIT(FLASH->PECR, FLASH_PECR_PRGLOCK);
|
|
||||||
|
|
||||||
/* Set the PELOCK Bit to lock the PECR Register access */
|
|
||||||
SET_BIT(FLASH->PECR, FLASH_PECR_PELOCK);
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Unlock the FLASH Option Control Registers access.
|
|
||||||
* @retval HAL Status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
|
|
||||||
{
|
|
||||||
uint32_t primask_bit;
|
|
||||||
|
|
||||||
if(HAL_IS_BIT_SET(FLASH->PECR, FLASH_PECR_OPTLOCK))
|
|
||||||
{
|
|
||||||
/* Disable interrupts to avoid any interruption during unlock sequence */
|
|
||||||
primask_bit = __get_PRIMASK();
|
|
||||||
__disable_irq();
|
|
||||||
|
|
||||||
/* Unlocking FLASH_PECR register access*/
|
|
||||||
if(HAL_IS_BIT_SET(FLASH->PECR, FLASH_PECR_PELOCK))
|
|
||||||
{
|
|
||||||
/* Unlocking FLASH_PECR register access*/
|
|
||||||
WRITE_REG(FLASH->PEKEYR, FLASH_PEKEY1);
|
|
||||||
WRITE_REG(FLASH->PEKEYR, FLASH_PEKEY2);
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Unlocking the option bytes block access */
|
|
||||||
WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1);
|
|
||||||
WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2);
|
|
||||||
|
|
||||||
/* Re-enable the interrupts: restore previous priority mask */
|
|
||||||
__set_PRIMASK(primask_bit);
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
return HAL_ERROR;
|
|
||||||
}
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Lock the FLASH Option Control Registers access.
|
|
||||||
* @retval HAL Status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
|
|
||||||
{
|
|
||||||
/* Set the OPTLOCK Bit to lock the option bytes block access */
|
|
||||||
SET_BIT(FLASH->PECR, FLASH_PECR_OPTLOCK);
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Launch the option byte loading.
|
|
||||||
* @note This function will reset automatically the MCU.
|
|
||||||
* @retval HAL Status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
|
|
||||||
{
|
|
||||||
/* Set the OBL_Launch bit to launch the option byte loading */
|
|
||||||
SET_BIT(FLASH->PECR, FLASH_PECR_OBL_LAUNCH);
|
|
||||||
|
|
||||||
/* Wait for last operation to be completed */
|
|
||||||
return(FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE));
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASH_Exported_Functions_Group3 Peripheral errors functions
|
|
||||||
* @brief Peripheral errors functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
===============================================================================
|
|
||||||
##### Peripheral Errors functions #####
|
|
||||||
===============================================================================
|
|
||||||
[..]
|
|
||||||
This subsection permit to get in run-time errors of the FLASH peripheral.
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Get the specific FLASH error flag.
|
|
||||||
* @retval FLASH_ErrorCode The returned value can be:
|
|
||||||
* @ref FLASH_Error_Codes
|
|
||||||
*/
|
|
||||||
uint32_t HAL_FLASH_GetError(void)
|
|
||||||
{
|
|
||||||
return pFlash.ErrorCode;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASH_Private_Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Wait for a FLASH operation to complete.
|
|
||||||
* @param Timeout maximum flash operation timeout
|
|
||||||
* @retval HAL Status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
|
|
||||||
{
|
|
||||||
/* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
|
|
||||||
Even if the FLASH operation fails, the BUSY flag will be reset and an error
|
|
||||||
flag will be set */
|
|
||||||
|
|
||||||
uint32_t tickstart = HAL_GetTick();
|
|
||||||
|
|
||||||
while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY))
|
|
||||||
{
|
|
||||||
if (Timeout != HAL_MAX_DELAY)
|
|
||||||
{
|
|
||||||
if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout))
|
|
||||||
{
|
|
||||||
return HAL_TIMEOUT;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Check FLASH End of Operation flag */
|
|
||||||
if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP))
|
|
||||||
{
|
|
||||||
/* Clear FLASH End of Operation pending bit */
|
|
||||||
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
|
|
||||||
}
|
|
||||||
|
|
||||||
if( __HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) ||
|
|
||||||
__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) ||
|
|
||||||
__HAL_FLASH_GET_FLAG(FLASH_FLAG_SIZERR) ||
|
|
||||||
__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR) ||
|
|
||||||
__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) ||
|
|
||||||
__HAL_FLASH_GET_FLAG(FLASH_FLAG_FWWERR) ||
|
|
||||||
__HAL_FLASH_GET_FLAG(FLASH_FLAG_NOTZEROERR) )
|
|
||||||
{
|
|
||||||
/*Save the error code*/
|
|
||||||
|
|
||||||
/* WARNING : On the first cut of STM32L031xx and STM32L041xx devices,
|
|
||||||
* (RefID = 0x1000) the FLASH_FLAG_OPTVERR bit was not behaving
|
|
||||||
* as expected. If the user run an application using the first
|
|
||||||
* cut of the STM32L031xx device or the first cut of the STM32L041xx
|
|
||||||
* device, this error should be ignored. The revId of the device
|
|
||||||
* can be retrieved via the HAL_GetREVID() function.
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
FLASH_SetErrorCode();
|
|
||||||
return HAL_ERROR;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* There is no error flag set */
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Set the specific FLASH error flag.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
static void FLASH_SetErrorCode(void)
|
|
||||||
{
|
|
||||||
uint32_t flags = 0;
|
|
||||||
|
|
||||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR))
|
|
||||||
{
|
|
||||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP;
|
|
||||||
flags |= FLASH_FLAG_WRPERR;
|
|
||||||
}
|
|
||||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR))
|
|
||||||
{
|
|
||||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA;
|
|
||||||
flags |= FLASH_FLAG_PGAERR;
|
|
||||||
}
|
|
||||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_SIZERR))
|
|
||||||
{
|
|
||||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_SIZE;
|
|
||||||
flags |= FLASH_FLAG_SIZERR;
|
|
||||||
}
|
|
||||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR))
|
|
||||||
{
|
|
||||||
/* WARNING : On the first cut of STM32L031xx and STM32L041xx devices,
|
|
||||||
* (RefID = 0x1000) the FLASH_FLAG_OPTVERR bit was not behaving
|
|
||||||
* as expected. If the user run an application using the first
|
|
||||||
* cut of the STM32L031xx device or the first cut of the STM32L041xx
|
|
||||||
* device, this error should be ignored. The revId of the device
|
|
||||||
* can be retrieved via the HAL_GetREVID() function.
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_OPTV;
|
|
||||||
flags |= FLASH_FLAG_OPTVERR;
|
|
||||||
}
|
|
||||||
|
|
||||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR))
|
|
||||||
{
|
|
||||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_RD;
|
|
||||||
flags |= FLASH_FLAG_RDERR;
|
|
||||||
}
|
|
||||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_FWWERR))
|
|
||||||
{
|
|
||||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_FWWERR;
|
|
||||||
flags |= HAL_FLASH_ERROR_FWWERR;
|
|
||||||
}
|
|
||||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_NOTZEROERR))
|
|
||||||
{
|
|
||||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_NOTZERO;
|
|
||||||
flags |= FLASH_FLAG_NOTZEROERR;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Clear FLASH error pending bits */
|
|
||||||
__HAL_FLASH_CLEAR_FLAG(flags);
|
|
||||||
}
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
File diff suppressed because it is too large
Load Diff
@ -1,521 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_flash_ramfunc.c
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief FLASH RAMFUNC driver.
|
|
||||||
* This file provides a Flash firmware functions which should be
|
|
||||||
* executed from internal SRAM
|
|
||||||
*
|
|
||||||
* @verbatim
|
|
||||||
|
|
||||||
*** ARM Compiler ***
|
|
||||||
--------------------
|
|
||||||
[..] RAM functions are defined using the toolchain options.
|
|
||||||
Functions that are be executed in RAM should reside in a separate
|
|
||||||
source module. Using the 'Options for File' dialog you can simply change
|
|
||||||
the 'Code / Const' area of a module to a memory space in physical RAM.
|
|
||||||
Available memory areas are declared in the 'Target' tab of the
|
|
||||||
Options for Target' dialog.
|
|
||||||
|
|
||||||
*** ICCARM Compiler ***
|
|
||||||
-----------------------
|
|
||||||
[..] RAM functions are defined using a specific toolchain keyword "__ramfunc".
|
|
||||||
|
|
||||||
*** GNU Compiler ***
|
|
||||||
--------------------
|
|
||||||
[..] RAM functions are defined using a specific toolchain attribute
|
|
||||||
"__attribute__((section(".RamFunc")))".
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
|
||||||
|
|
||||||
/** @addtogroup FLASH
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/** @addtogroup FLASH_Private_Variables
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
extern FLASH_ProcessTypeDef pFlash;
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASH_RAMFUNC FLASH_RAMFUNC
|
|
||||||
* @brief FLASH functions executed from RAM
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
/* Private typedef -----------------------------------------------------------*/
|
|
||||||
/* Private define ------------------------------------------------------------*/
|
|
||||||
/* Private macro -------------------------------------------------------------*/
|
|
||||||
/* Private variables ---------------------------------------------------------*/
|
|
||||||
/* Private function prototypes -----------------------------------------------*/
|
|
||||||
/** @defgroup FLASH_RAMFUNC_Private_Functions FLASH RAM Private Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
static __RAM_FUNC HAL_StatusTypeDef FLASHRAM_WaitForLastOperation(uint32_t Timeout);
|
|
||||||
static __RAM_FUNC HAL_StatusTypeDef FLASHRAM_SetErrorCode(void);
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Private functions ---------------------------------------------------------*/
|
|
||||||
|
|
||||||
/** @defgroup FLASH_RAMFUNC_Exported_Functions FLASH RAM Exported Functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
===============================================================================
|
|
||||||
##### ramfunc functions #####
|
|
||||||
===============================================================================
|
|
||||||
[..]
|
|
||||||
This subsection provides a set of functions that should be executed from RAM
|
|
||||||
transfers.
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group1 Peripheral features functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enable the power down mode during RUN mode.
|
|
||||||
* @note This function can be used only when the user code is running from Internal SRAM.
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableRunPowerDown(void)
|
|
||||||
{
|
|
||||||
/* Enable the Power Down in Run mode*/
|
|
||||||
__HAL_FLASH_POWER_DOWN_ENABLE();
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disable the power down mode during RUN mode.
|
|
||||||
* @note This function can be used only when the user code is running from Internal SRAM.
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableRunPowerDown(void)
|
|
||||||
{
|
|
||||||
/* Disable the Power Down in Run mode*/
|
|
||||||
__HAL_FLASH_POWER_DOWN_DISABLE();
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group2 Programming and erasing operation functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#if defined(FLASH_PECR_PARALLBANK)
|
|
||||||
/**
|
|
||||||
* @brief Erases a specified 2 pages in program memory in parallel.
|
|
||||||
* @note This function can be used only for STM32L07xxx/STM32L08xxx devices.
|
|
||||||
* To correctly run this function, the @ref HAL_FLASH_Unlock() function
|
|
||||||
* must be called before.
|
|
||||||
* Call the @ref HAL_FLASH_Lock() to disable the flash memory access
|
|
||||||
* (recommended to protect the FLASH memory against possible unwanted operation).
|
|
||||||
* @param Page_Address1: The page address in program memory to be erased in
|
|
||||||
* the first Bank (BANK1). This parameter should be between FLASH_BASE
|
|
||||||
* and FLASH_BANK1_END.
|
|
||||||
* @param Page_Address2: The page address in program memory to be erased in
|
|
||||||
* the second Bank (BANK2). This parameter should be between FLASH_BANK2_BASE
|
|
||||||
* and FLASH_BANK2_END.
|
|
||||||
* @note A Page is erased in the Program memory only if the address to load
|
|
||||||
* is the start address of a page (multiple of @ref FLASH_PAGE_SIZE bytes).
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EraseParallelPage(uint32_t Page_Address1, uint32_t Page_Address2)
|
|
||||||
{
|
|
||||||
HAL_StatusTypeDef status = HAL_OK;
|
|
||||||
|
|
||||||
/* Wait for last operation to be completed */
|
|
||||||
status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
|
|
||||||
|
|
||||||
if(status == HAL_OK)
|
|
||||||
{
|
|
||||||
/* Proceed to erase the page */
|
|
||||||
SET_BIT(FLASH->PECR, FLASH_PECR_PARALLBANK);
|
|
||||||
SET_BIT(FLASH->PECR, FLASH_PECR_ERASE);
|
|
||||||
SET_BIT(FLASH->PECR, FLASH_PECR_PROG);
|
|
||||||
|
|
||||||
/* Write 00000000h to the first word of the first program page to erase */
|
|
||||||
*(__IO uint32_t *)Page_Address1 = 0x00000000U;
|
|
||||||
/* Write 00000000h to the first word of the second program page to erase */
|
|
||||||
*(__IO uint32_t *)Page_Address2 = 0x00000000U;
|
|
||||||
|
|
||||||
/* Wait for last operation to be completed */
|
|
||||||
status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
|
|
||||||
|
|
||||||
/* If the erase operation is completed, disable the ERASE, PROG and PARALLBANK bits */
|
|
||||||
CLEAR_BIT(FLASH->PECR, FLASH_PECR_PROG);
|
|
||||||
CLEAR_BIT(FLASH->PECR, FLASH_PECR_ERASE);
|
|
||||||
CLEAR_BIT(FLASH->PECR, FLASH_PECR_PARALLBANK);
|
|
||||||
}
|
|
||||||
/* Return the Erase Status */
|
|
||||||
return status;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Program 2 half pages in program memory in parallel (half page size is 16 Words).
|
|
||||||
* @note This function can be used only for STM32L07xxx/STM32L08xxx devices.
|
|
||||||
* @param Address1: specifies the first address to be written in the first bank
|
|
||||||
* (BANK1). This parameter should be between FLASH_BASE and (FLASH_BANK1_END - FLASH_PAGE_SIZE).
|
|
||||||
* @param pBuffer1: pointer to the buffer containing the data to be written
|
|
||||||
* to the first half page in the first bank.
|
|
||||||
* @param Address2: specifies the second address to be written in the second bank
|
|
||||||
* (BANK2). This parameter should be between FLASH_BANK2_BASE and (FLASH_BANK2_END - FLASH_PAGE_SIZE).
|
|
||||||
* @param pBuffer2: pointer to the buffer containing the data to be written
|
|
||||||
* to the second half page in the second bank.
|
|
||||||
* @note To correctly run this function, the @ref HAL_FLASH_Unlock() function
|
|
||||||
* must be called before.
|
|
||||||
* Call the @ref HAL_FLASH_Lock() to disable the flash memory access
|
|
||||||
* (recommended to protect the FLASH memory against possible unwanted operation).
|
|
||||||
* @note Half page write is possible only from SRAM.
|
|
||||||
* @note A half page is written to the program memory only if the first
|
|
||||||
* address to load is the start address of a half page (multiple of 64
|
|
||||||
* bytes) and the 15 remaining words to load are in the same half page.
|
|
||||||
* @note During the Program memory half page write all read operations are
|
|
||||||
* forbidden (this includes DMA read operations and debugger read
|
|
||||||
* operations such as breakpoints, periodic updates, etc.).
|
|
||||||
* @note If a PGAERR is set during a Program memory half page write, the
|
|
||||||
* complete write operation is aborted. Software should then reset the
|
|
||||||
* FPRG and PROG/DATA bits and restart the write operation from the
|
|
||||||
* beginning.
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_ProgramParallelHalfPage(uint32_t Address1, uint32_t* pBuffer1, uint32_t Address2, uint32_t* pBuffer2)
|
|
||||||
{
|
|
||||||
uint32_t count = 0U;
|
|
||||||
HAL_StatusTypeDef status = HAL_OK;
|
|
||||||
|
|
||||||
/* Wait for last operation to be completed */
|
|
||||||
status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
|
|
||||||
|
|
||||||
if(status == HAL_OK)
|
|
||||||
{
|
|
||||||
/* Proceed to program the new half page */
|
|
||||||
SET_BIT(FLASH->PECR, FLASH_PECR_PARALLBANK);
|
|
||||||
SET_BIT(FLASH->PECR, FLASH_PECR_FPRG);
|
|
||||||
SET_BIT(FLASH->PECR, FLASH_PECR_PROG);
|
|
||||||
|
|
||||||
/* Wait for last operation to be completed */
|
|
||||||
status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
|
|
||||||
if(status == HAL_OK)
|
|
||||||
{
|
|
||||||
/* Disable all IRQs */
|
|
||||||
__disable_irq();
|
|
||||||
|
|
||||||
/* Write the first half page directly with 16 different words */
|
|
||||||
while(count < 16U)
|
|
||||||
{
|
|
||||||
/* Address1 doesn't need to be increased */
|
|
||||||
*(__IO uint32_t*) Address1 = *pBuffer1;
|
|
||||||
pBuffer1++;
|
|
||||||
count ++;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Write the second half page directly with 16 different words */
|
|
||||||
count = 0U;
|
|
||||||
while(count < 16U)
|
|
||||||
{
|
|
||||||
/* Address2 doesn't need to be increased */
|
|
||||||
*(__IO uint32_t*) Address2 = *pBuffer2;
|
|
||||||
pBuffer2++;
|
|
||||||
count ++;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Enable IRQs */
|
|
||||||
__enable_irq();
|
|
||||||
|
|
||||||
/* Wait for last operation to be completed */
|
|
||||||
status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
|
|
||||||
}
|
|
||||||
|
|
||||||
/* if the write operation is completed, disable the PROG, FPRG and PARALLBANK bits */
|
|
||||||
CLEAR_BIT(FLASH->PECR, FLASH_PECR_PROG);
|
|
||||||
CLEAR_BIT(FLASH->PECR, FLASH_PECR_FPRG);
|
|
||||||
CLEAR_BIT(FLASH->PECR, FLASH_PECR_PARALLBANK);
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Return the Write Status */
|
|
||||||
return status;
|
|
||||||
}
|
|
||||||
#endif /* FLASH_PECR_PARALLBANK */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Program a half page in program memory.
|
|
||||||
* @param Address specifies the address to be written.
|
|
||||||
* @param pBuffer pointer to the buffer containing the data to be written to
|
|
||||||
* the half page.
|
|
||||||
* @note To correctly run this function, the @ref HAL_FLASH_Unlock() function
|
|
||||||
* must be called before.
|
|
||||||
* Call the @ref HAL_FLASH_Lock() to disable the flash memory access
|
|
||||||
* (recommended to protect the FLASH memory against possible unwanted operation)
|
|
||||||
* @note Half page write is possible only from SRAM.
|
|
||||||
* @note A half page is written to the program memory only if the first
|
|
||||||
* address to load is the start address of a half page (multiple of 64
|
|
||||||
* bytes) and the 15 remaining words to load are in the same half page.
|
|
||||||
* @note During the Program memory half page write all read operations are
|
|
||||||
* forbidden (this includes DMA read operations and debugger read
|
|
||||||
* operations such as breakpoints, periodic updates, etc.).
|
|
||||||
* @note If a PGAERR is set during a Program memory half page write, the
|
|
||||||
* complete write operation is aborted. Software should then reset the
|
|
||||||
* FPRG and PROG/DATA bits and restart the write operation from the
|
|
||||||
* beginning.
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_HalfPageProgram(uint32_t Address, uint32_t* pBuffer)
|
|
||||||
{
|
|
||||||
uint32_t count = 0U;
|
|
||||||
HAL_StatusTypeDef status = HAL_OK;
|
|
||||||
|
|
||||||
/* Wait for last operation to be completed */
|
|
||||||
status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
|
|
||||||
|
|
||||||
if(status == HAL_OK)
|
|
||||||
{
|
|
||||||
/* Proceed to program the new half page */
|
|
||||||
SET_BIT(FLASH->PECR, FLASH_PECR_FPRG);
|
|
||||||
SET_BIT(FLASH->PECR, FLASH_PECR_PROG);
|
|
||||||
|
|
||||||
/* Disable all IRQs */
|
|
||||||
__disable_irq();
|
|
||||||
|
|
||||||
/* Write one half page directly with 16 different words */
|
|
||||||
while(count < 16U)
|
|
||||||
{
|
|
||||||
/* Address doesn't need to be increased */
|
|
||||||
*(__IO uint32_t*) Address = *pBuffer;
|
|
||||||
pBuffer++;
|
|
||||||
count ++;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Enable IRQs */
|
|
||||||
__enable_irq();
|
|
||||||
|
|
||||||
/* Wait for last operation to be completed */
|
|
||||||
status = FLASHRAM_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
|
|
||||||
|
|
||||||
/* If the write operation is completed, disable the PROG and FPRG bits */
|
|
||||||
CLEAR_BIT(FLASH->PECR, FLASH_PECR_PROG);
|
|
||||||
CLEAR_BIT(FLASH->PECR, FLASH_PECR_FPRG);
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Return the Write Status */
|
|
||||||
return status;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group3 Peripheral errors functions
|
|
||||||
* @brief Peripheral errors functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
===============================================================================
|
|
||||||
##### Peripheral errors functions #####
|
|
||||||
===============================================================================
|
|
||||||
[..]
|
|
||||||
This subsection permit to get in run-time errors of the FLASH peripheral.
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Get the specific FLASH errors flag.
|
|
||||||
* @param Error pointer is the error value. It can be a mixed of:
|
|
||||||
* @arg @ref HAL_FLASH_ERROR_RD FLASH Read Protection error flag (PCROP)
|
|
||||||
* @arg @ref HAL_FLASH_ERROR_SIZE FLASH Programming Parallelism error flag
|
|
||||||
* @arg @ref HAL_FLASH_ERROR_PGA FLASH Programming Alignment error flag
|
|
||||||
* @arg @ref HAL_FLASH_ERROR_WRP FLASH Write protected error flag
|
|
||||||
* @arg @ref HAL_FLASH_ERROR_OPTV FLASH Option valid error flag
|
|
||||||
* @arg @ref HAL_FLASH_ERROR_FWWERR FLASH Write or Erase operation aborted
|
|
||||||
* @arg @ref HAL_FLASH_ERROR_NOTZERO FLASH Write operation is done in a not-erased region
|
|
||||||
* @retval HAL Status
|
|
||||||
*/
|
|
||||||
__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_GetError(uint32_t * Error)
|
|
||||||
{
|
|
||||||
*Error = pFlash.ErrorCode;
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup FLASH_RAMFUNC_Private_Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Set the specific FLASH error flag.
|
|
||||||
* @retval HAL Status
|
|
||||||
*/
|
|
||||||
static __RAM_FUNC HAL_StatusTypeDef FLASHRAM_SetErrorCode(void)
|
|
||||||
{
|
|
||||||
uint32_t flags = 0;
|
|
||||||
|
|
||||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR))
|
|
||||||
{
|
|
||||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP;
|
|
||||||
flags |= FLASH_FLAG_WRPERR;
|
|
||||||
}
|
|
||||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR))
|
|
||||||
{
|
|
||||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA;
|
|
||||||
flags |= FLASH_FLAG_PGAERR;
|
|
||||||
}
|
|
||||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_SIZERR))
|
|
||||||
{
|
|
||||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_SIZE;
|
|
||||||
flags |= FLASH_FLAG_SIZERR;
|
|
||||||
}
|
|
||||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR))
|
|
||||||
{
|
|
||||||
/* WARNING : On the first cut of STM32L031xx and STM32L041xx devices,
|
|
||||||
* (RefID = 0x1000) the FLASH_FLAG_OPTVERR bit was not behaving
|
|
||||||
* as expected. If the user run an application using the first
|
|
||||||
* cut of the STM32L031xx device or the first cut of the STM32L041xx
|
|
||||||
* device, this error should be ignored. The revId of the device
|
|
||||||
* can be retrieved via the HAL_GetREVID() function.
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_OPTV;
|
|
||||||
flags |= FLASH_FLAG_OPTVERR;
|
|
||||||
}
|
|
||||||
|
|
||||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR))
|
|
||||||
{
|
|
||||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_RD;
|
|
||||||
flags |= FLASH_FLAG_RDERR;
|
|
||||||
}
|
|
||||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_FWWERR))
|
|
||||||
{
|
|
||||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_FWWERR;
|
|
||||||
flags |= HAL_FLASH_ERROR_FWWERR;
|
|
||||||
}
|
|
||||||
if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_NOTZEROERR))
|
|
||||||
{
|
|
||||||
pFlash.ErrorCode |= HAL_FLASH_ERROR_NOTZERO;
|
|
||||||
flags |= FLASH_FLAG_NOTZEROERR;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Clear FLASH error pending bits */
|
|
||||||
__HAL_FLASH_CLEAR_FLAG(flags);
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Wait for a FLASH operation to complete.
|
|
||||||
* @param Timeout maximum flash operationtimeout
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
static __RAM_FUNC HAL_StatusTypeDef FLASHRAM_WaitForLastOperation(uint32_t Timeout)
|
|
||||||
{
|
|
||||||
/* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
|
|
||||||
Even if the FLASH operation fails, the BUSY flag will be reset and an error
|
|
||||||
flag will be set */
|
|
||||||
|
|
||||||
while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) && (Timeout != 0x00U))
|
|
||||||
{
|
|
||||||
Timeout--;
|
|
||||||
}
|
|
||||||
|
|
||||||
if(Timeout == 0x00U)
|
|
||||||
{
|
|
||||||
return HAL_TIMEOUT;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Check FLASH End of Operation flag */
|
|
||||||
if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP))
|
|
||||||
{
|
|
||||||
/* Clear FLASH End of Operation pending bit */
|
|
||||||
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
|
|
||||||
}
|
|
||||||
|
|
||||||
if( __HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) ||
|
|
||||||
__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) ||
|
|
||||||
__HAL_FLASH_GET_FLAG(FLASH_FLAG_SIZERR) ||
|
|
||||||
__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR) ||
|
|
||||||
__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) ||
|
|
||||||
__HAL_FLASH_GET_FLAG(FLASH_FLAG_FWWERR) ||
|
|
||||||
__HAL_FLASH_GET_FLAG(FLASH_FLAG_NOTZEROERR) )
|
|
||||||
{
|
|
||||||
/*Save the error code*/
|
|
||||||
|
|
||||||
/* WARNING : On the first cut of STM32L031xx and STM32L041xx devices,
|
|
||||||
* (RefID = 0x1000) the FLASH_FLAG_OPTVERR bit was not behaving
|
|
||||||
* as expected. If the user run an application using the first
|
|
||||||
* cut of the STM32L031xx device or the first cut of the STM32L041xx
|
|
||||||
* device, this error should be ignored. The revId of the device
|
|
||||||
* can be retrieved via the HAL_GetREVID() function.
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
FLASHRAM_SetErrorCode();
|
|
||||||
return HAL_ERROR;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* There is no error flag set */
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
@ -1,538 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_gpio.c
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief GPIO HAL module driver.
|
|
||||||
* This file provides firmware functions to manage the following
|
|
||||||
* functionalities of the General Purpose Input/Output (GPIO) peripheral:
|
|
||||||
* + Initialization and de-initialization functions
|
|
||||||
* + IO operation functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
==============================================================================
|
|
||||||
##### GPIO Peripheral features #####
|
|
||||||
==============================================================================
|
|
||||||
[..]
|
|
||||||
(+) Each port bit of the general-purpose I/O (GPIO) ports can be individually
|
|
||||||
configured by software in several modes:
|
|
||||||
(++) Input mode
|
|
||||||
(++) Analog mode
|
|
||||||
(++) Output mode
|
|
||||||
(++) Alternate function mode
|
|
||||||
(++) External interrupt/event lines
|
|
||||||
|
|
||||||
(+) During and just after reset, the alternate functions and external interrupt
|
|
||||||
lines are not active and the I/O ports are configured in input floating mode.
|
|
||||||
|
|
||||||
(+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be
|
|
||||||
activated or not.
|
|
||||||
|
|
||||||
(+) In Output or Alternate mode, each IO can be configured on open-drain or push-pull
|
|
||||||
type and the IO speed can be selected depending on the VDD value.
|
|
||||||
|
|
||||||
(+) The microcontroller IO pins are connected to onboard peripherals/modules through a
|
|
||||||
multiplexer that allows only one peripheral alternate function (AF) connected
|
|
||||||
to an IO pin at a time. In this way, there can be no conflict between peripherals
|
|
||||||
sharing the same IO pin.
|
|
||||||
|
|
||||||
(+) All ports have external interrupt/event capability. To use external interrupt
|
|
||||||
lines, the port must be configured in input mode. All available GPIO pins are
|
|
||||||
connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
|
|
||||||
|
|
||||||
(+) The external interrupt/event controller consists of up to 28 edge detectors
|
|
||||||
(16 lines are connected to GPIO) for generating event/interrupt requests (each
|
|
||||||
input line can be independently configured to select the type (interrupt or event)
|
|
||||||
and the corresponding trigger event (rising or falling or both). Each line can
|
|
||||||
also be masked independently.
|
|
||||||
|
|
||||||
##### How to use this driver #####
|
|
||||||
==============================================================================
|
|
||||||
[..]
|
|
||||||
(#) Enable the GPIO IOPORT clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE().
|
|
||||||
|
|
||||||
(#) Configure the GPIO pin(s) using HAL_GPIO_Init().
|
|
||||||
(++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
|
|
||||||
(++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef
|
|
||||||
structure.
|
|
||||||
(++) In case of Output or alternate function mode selection: the speed is
|
|
||||||
configured through "Speed" member from GPIO_InitTypeDef structure.
|
|
||||||
(++) In alternate mode is selection, the alternate function connected to the IO
|
|
||||||
is configured through "Alternate" member from GPIO_InitTypeDef structure.
|
|
||||||
(++) Analog mode is required when a pin is to be used as ADC channel
|
|
||||||
or DAC output.
|
|
||||||
(++) In case of external interrupt/event selection the "Mode" member from
|
|
||||||
GPIO_InitTypeDef structure select the type (interrupt or event) and
|
|
||||||
the corresponding trigger event (rising or falling or both).
|
|
||||||
|
|
||||||
(#) In case of external interrupt/event mode selection, configure NVIC IRQ priority
|
|
||||||
mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
|
|
||||||
HAL_NVIC_EnableIRQ().
|
|
||||||
|
|
||||||
(#) HAL_GPIO_DeInit allows to set register values to their reset value. This function
|
|
||||||
is also to be used when unconfiguring pin which was used as an external interrupt
|
|
||||||
or in event mode. That is the only way to reset the corresponding bit in
|
|
||||||
EXTI & SYSCFG registers.
|
|
||||||
|
|
||||||
(#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
|
|
||||||
|
|
||||||
(#) To set/reset the level of a pin configured in output mode use
|
|
||||||
HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
|
|
||||||
|
|
||||||
(#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
|
|
||||||
|
|
||||||
(#) During and just after reset, the alternate functions are not
|
|
||||||
active and the GPIO pins are configured in input floating mode (except JTAG
|
|
||||||
pins).
|
|
||||||
|
|
||||||
(#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose
|
|
||||||
(PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has
|
|
||||||
priority over the GPIO function.
|
|
||||||
|
|
||||||
(#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as
|
|
||||||
general purpose PH0 and PH1, respectively, when the HSE oscillator is off.
|
|
||||||
The HSE has priority over the GPIO function.
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright(c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
|
||||||
|
|
||||||
/** @addtogroup GPIO
|
|
||||||
* @brief GPIO HAL module driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup GPIO_Private
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/* Private define ------------------------------------------------------------*/
|
|
||||||
|
|
||||||
|
|
||||||
#define GPIO_MODE (0x00000003U)
|
|
||||||
#define EXTI_MODE (0x10000000U)
|
|
||||||
#define GPIO_MODE_IT (0x00010000U)
|
|
||||||
#define GPIO_MODE_EVT (0x00020000U)
|
|
||||||
#define RISING_EDGE (0x00100000U)
|
|
||||||
#define FALLING_EDGE (0x00200000U)
|
|
||||||
#define GPIO_OUTPUT_TYPE (0x00000010U)
|
|
||||||
|
|
||||||
#define GPIO_NUMBER (16U)
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
/** @addtogroup GPIO_Exported_Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup GPIO_Exported_Functions_Group1
|
|
||||||
* @brief Initialization and de-initialization functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
===============================================================================
|
|
||||||
##### Initialization and de-initialization functions #####
|
|
||||||
===============================================================================
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init.
|
|
||||||
* @param GPIOx where x can be (A..E and H) to select the GPIO peripheral for STM32L0XX family devices.
|
|
||||||
* Note that GPIOE is not available on all devices.
|
|
||||||
* @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains
|
|
||||||
* the configuration information for the specified GPIO peripheral.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init)
|
|
||||||
{
|
|
||||||
uint32_t position = 0x00U;
|
|
||||||
uint32_t iocurrent = 0x00U;
|
|
||||||
uint32_t temp = 0x00U;
|
|
||||||
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
|
|
||||||
assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
|
|
||||||
assert_param(IS_GPIO_PIN_AVAILABLE(GPIOx, (GPIO_Init->Pin)));
|
|
||||||
|
|
||||||
/* Configure the port pins */
|
|
||||||
while (((GPIO_Init->Pin) >> position) != 0)
|
|
||||||
{
|
|
||||||
/* Get the IO position */
|
|
||||||
iocurrent = (GPIO_Init->Pin) & (1U << position);
|
|
||||||
|
|
||||||
if (iocurrent)
|
|
||||||
{
|
|
||||||
/*--------------------- GPIO Mode Configuration ------------------------*/
|
|
||||||
/* In case of Output or Alternate function mode selection */
|
|
||||||
if ((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
|
|
||||||
(GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
|
|
||||||
{
|
|
||||||
/* Check the Speed parameter */
|
|
||||||
assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
|
|
||||||
/* Configure the IO Speed */
|
|
||||||
temp = GPIOx->OSPEEDR;
|
|
||||||
temp &= ~(GPIO_OSPEEDER_OSPEED0 << (position * 2U));
|
|
||||||
temp |= (GPIO_Init->Speed << (position * 2U));
|
|
||||||
GPIOx->OSPEEDR = temp;
|
|
||||||
|
|
||||||
/* Configure the IO Output Type */
|
|
||||||
temp = GPIOx->OTYPER;
|
|
||||||
temp &= ~(GPIO_OTYPER_OT_0 << position) ;
|
|
||||||
temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4U) << position);
|
|
||||||
GPIOx->OTYPER = temp;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Activate the Pull-up or Pull down resistor for the current IO */
|
|
||||||
temp = GPIOx->PUPDR;
|
|
||||||
temp &= ~(GPIO_PUPDR_PUPD0 << (position * 2U));
|
|
||||||
temp |= ((GPIO_Init->Pull) << (position * 2U));
|
|
||||||
GPIOx->PUPDR = temp;
|
|
||||||
|
|
||||||
/* In case of Alternate function mode selection */
|
|
||||||
if ((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
|
|
||||||
{
|
|
||||||
/* Check the Alternate function parameters */
|
|
||||||
assert_param(IS_GPIO_AF_INSTANCE(GPIOx));
|
|
||||||
assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
|
|
||||||
|
|
||||||
/* Configure Alternate function mapped with the current IO */
|
|
||||||
temp = GPIOx->AFR[position >> 3U];
|
|
||||||
temp &= ~(0xFUL << ((uint32_t)(position & 0x07UL) * 4U));
|
|
||||||
temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & (uint32_t)0x07U) * 4U));
|
|
||||||
GPIOx->AFR[position >> 3U] = temp;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Configure IO Direction mode (Input, Output, Alternate or Analog) */
|
|
||||||
temp = GPIOx->MODER;
|
|
||||||
temp &= ~(GPIO_MODER_MODE0 << (position * 2U));
|
|
||||||
temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2U));
|
|
||||||
GPIOx->MODER = temp;
|
|
||||||
|
|
||||||
/*--------------------- EXTI Mode Configuration ------------------------*/
|
|
||||||
/* Configure the External Interrupt or event for the current IO */
|
|
||||||
if ((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
|
|
||||||
{
|
|
||||||
/* Enable SYSCFG Clock */
|
|
||||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
|
||||||
|
|
||||||
temp = SYSCFG->EXTICR[position >> 2U];
|
|
||||||
CLEAR_BIT(temp, (0x0FUL) << (4U * (position & 0x03U)));
|
|
||||||
SET_BIT(temp, (GPIO_GET_INDEX(GPIOx)) << (4 * (position & 0x03U)));
|
|
||||||
SYSCFG->EXTICR[position >> 2U] = temp;
|
|
||||||
|
|
||||||
/* Clear EXTI line configuration */
|
|
||||||
temp = EXTI->IMR;
|
|
||||||
temp &= ~((uint32_t)iocurrent);
|
|
||||||
if ((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
|
|
||||||
{
|
|
||||||
temp |= iocurrent;
|
|
||||||
}
|
|
||||||
EXTI->IMR = temp;
|
|
||||||
|
|
||||||
temp = EXTI->EMR;
|
|
||||||
temp &= ~((uint32_t)iocurrent);
|
|
||||||
if ((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
|
|
||||||
{
|
|
||||||
temp |= iocurrent;
|
|
||||||
}
|
|
||||||
EXTI->EMR = temp;
|
|
||||||
|
|
||||||
/* Clear Rising Falling edge configuration */
|
|
||||||
temp = EXTI->RTSR;
|
|
||||||
temp &= ~((uint32_t)iocurrent);
|
|
||||||
if ((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
|
|
||||||
{
|
|
||||||
temp |= iocurrent;
|
|
||||||
}
|
|
||||||
EXTI->RTSR = temp;
|
|
||||||
|
|
||||||
temp = EXTI->FTSR;
|
|
||||||
temp &= ~((uint32_t)iocurrent);
|
|
||||||
if ((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
|
|
||||||
{
|
|
||||||
temp |= iocurrent;
|
|
||||||
}
|
|
||||||
EXTI->FTSR = temp;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
position++;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief De-initializes the GPIOx peripheral registers to their default reset values.
|
|
||||||
* @param GPIOx where x can be (A..E and H) to select the GPIO peripheral for STM32L0XX family devices.
|
|
||||||
* Note that GPIOE is not available on all devices.
|
|
||||||
* @param GPIO_Pin specifies the port bit to be written.
|
|
||||||
* This parameter can be one of GPIO_PIN_x where x can be (0..15).
|
|
||||||
* All port bits are not necessarily available on all GPIOs.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin)
|
|
||||||
{
|
|
||||||
uint32_t position = 0x00U;
|
|
||||||
uint32_t iocurrent = 0x00U;
|
|
||||||
uint32_t tmp = 0x00U;
|
|
||||||
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_GPIO_PIN_AVAILABLE(GPIOx, GPIO_Pin));
|
|
||||||
|
|
||||||
/* Configure the port pins */
|
|
||||||
while ((GPIO_Pin >> position) != 0)
|
|
||||||
{
|
|
||||||
/* Get the IO position */
|
|
||||||
iocurrent = (GPIO_Pin) & (1U << position);
|
|
||||||
|
|
||||||
if (iocurrent)
|
|
||||||
{
|
|
||||||
/*------------------------- EXTI Mode Configuration --------------------*/
|
|
||||||
/* Clear the External Interrupt or Event for the current IO */
|
|
||||||
|
|
||||||
tmp = SYSCFG->EXTICR[position >> 2U];
|
|
||||||
tmp &= ((0x0FUL) << (4U * (position & 0x03U)));
|
|
||||||
if (tmp == (GPIO_GET_INDEX(GPIOx) << (4U * (position & 0x03U))))
|
|
||||||
{
|
|
||||||
/* Clear EXTI line configuration */
|
|
||||||
EXTI->IMR &= ~((uint32_t)iocurrent);
|
|
||||||
EXTI->EMR &= ~((uint32_t)iocurrent);
|
|
||||||
|
|
||||||
/* Clear Rising Falling edge configuration */
|
|
||||||
EXTI->RTSR &= ~((uint32_t)iocurrent);
|
|
||||||
EXTI->FTSR &= ~((uint32_t)iocurrent);
|
|
||||||
|
|
||||||
tmp = (0x0FUL) << (4U * (position & 0x03U));
|
|
||||||
SYSCFG->EXTICR[position >> 2U] &= ~tmp;
|
|
||||||
}
|
|
||||||
|
|
||||||
/*------------------------- GPIO Mode Configuration --------------------*/
|
|
||||||
/* Configure IO Direction in Input Floting Mode */
|
|
||||||
GPIOx->MODER |= (GPIO_MODER_MODE0 << (position * 2U));
|
|
||||||
|
|
||||||
/* Configure the default Alternate Function in current IO */
|
|
||||||
GPIOx->AFR[position >> 3U] &= ~(0xFUL << ((uint32_t)(position & 0x07UL) * 4U));
|
|
||||||
|
|
||||||
/* Deactivate the Pull-up oand Pull-down resistor for the current IO */
|
|
||||||
GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPD0 << (position * 2U));
|
|
||||||
|
|
||||||
/* Configure the default value IO Output Type */
|
|
||||||
GPIOx->OTYPER &= ~(GPIO_OTYPER_OT_0 << position);
|
|
||||||
|
|
||||||
/* Configure the default value for IO Speed */
|
|
||||||
GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEED0 << (position * 2U));
|
|
||||||
}
|
|
||||||
position++;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup GPIO_Exported_Functions_Group2
|
|
||||||
* @brief GPIO Read and Write
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
===============================================================================
|
|
||||||
##### IO operation functions #####
|
|
||||||
===============================================================================
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Reads the specified input port pin.
|
|
||||||
* @param GPIOx where x can be (A..E and H) to select the GPIO peripheral for STM32L0xx family devices.
|
|
||||||
* Note that GPIOE is not available on all devices.
|
|
||||||
* @param GPIO_Pin specifies the port bit to read.
|
|
||||||
* This parameter can be GPIO_PIN_x where x can be (0..15).
|
|
||||||
* All port bits are not necessarily available on all GPIOs.
|
|
||||||
* @retval The input port pin value.
|
|
||||||
*/
|
|
||||||
GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin)
|
|
||||||
{
|
|
||||||
GPIO_PinState bitstatus;
|
|
||||||
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_GPIO_PIN_AVAILABLE(GPIOx, GPIO_Pin));
|
|
||||||
|
|
||||||
if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET)
|
|
||||||
{
|
|
||||||
bitstatus = GPIO_PIN_SET;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
bitstatus = GPIO_PIN_RESET;
|
|
||||||
}
|
|
||||||
return bitstatus;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Sets or clears the selected data port bit.
|
|
||||||
*
|
|
||||||
* @note This function uses GPIOx_BSRR register to allow atomic read/modify
|
|
||||||
* accesses. In this way, there is no risk of an IRQ occurring between
|
|
||||||
* the read and the modify access.
|
|
||||||
*
|
|
||||||
* @param GPIOx where x can be (A..E and H) to select the GPIO peripheral for STM32L0xx family devices.
|
|
||||||
* Note that GPIOE is not available on all devices.
|
|
||||||
* @param GPIO_Pin specifies the port bit to be written.
|
|
||||||
* This parameter can be one of GPIO_PIN_x where x can be (0..15).
|
|
||||||
* All port bits are not necessarily available on all GPIOs.
|
|
||||||
* @param PinState specifies the value to be written to the selected bit.
|
|
||||||
* This parameter can be one of the GPIO_PinState enum values:
|
|
||||||
* GPIO_PIN_RESET: to clear the port pin
|
|
||||||
* GPIO_PIN_SET: to set the port pin
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
|
|
||||||
{
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_GPIO_PIN_AVAILABLE(GPIOx, GPIO_Pin));
|
|
||||||
assert_param(IS_GPIO_PIN_ACTION(PinState));
|
|
||||||
|
|
||||||
if (PinState != GPIO_PIN_RESET)
|
|
||||||
{
|
|
||||||
GPIOx->BSRR = GPIO_Pin;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
GPIOx->BRR = GPIO_Pin ;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Toggles the specified GPIO pins.
|
|
||||||
* @param GPIOx Where x can be (A..E and H) to select the GPIO peripheral for STM32L0xx family devices.
|
|
||||||
* Note that GPIOE is not available on all devices.
|
|
||||||
* All port bits are not necessarily available on all GPIOs.
|
|
||||||
* @param GPIO_Pin Specifies the pins to be toggled.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin)
|
|
||||||
{
|
|
||||||
uint32_t odr;
|
|
||||||
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_GPIO_PIN_AVAILABLE(GPIOx, GPIO_Pin));
|
|
||||||
|
|
||||||
/* get current Ouput Data Register value */
|
|
||||||
odr = GPIOx->ODR;
|
|
||||||
|
|
||||||
/* Set selected pins that were at low level, and reset ones that were high */
|
|
||||||
GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Locks GPIO Pins configuration registers.
|
|
||||||
* @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
|
|
||||||
* GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
|
|
||||||
* @note The configuration of the locked GPIO pins can no longer be modified
|
|
||||||
* until the next reset.
|
|
||||||
* @param GPIOx where x can be (A..E and H) to select the GPIO peripheral for STM32L0xx family.
|
|
||||||
* Note that GPIOE is not available on all devices.
|
|
||||||
* @param GPIO_Pin specifies the port bit to be locked.
|
|
||||||
* This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
|
|
||||||
* All port bits are not necessarily available on all GPIOs.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin)
|
|
||||||
{
|
|
||||||
__IO uint32_t tmp = GPIO_LCKR_LCKK;
|
|
||||||
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_GPIO_PIN_AVAILABLE(GPIOx, GPIO_Pin));
|
|
||||||
|
|
||||||
/* Apply lock key write sequence */
|
|
||||||
tmp |= GPIO_Pin;
|
|
||||||
/* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
|
|
||||||
GPIOx->LCKR = tmp;
|
|
||||||
/* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */
|
|
||||||
GPIOx->LCKR = GPIO_Pin;
|
|
||||||
/* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
|
|
||||||
GPIOx->LCKR = tmp;
|
|
||||||
/* Read LCKK register. This read is mandatory to complete key lock sequence */
|
|
||||||
tmp = GPIOx->LCKR;
|
|
||||||
|
|
||||||
/* read again in order to confirm lock is active */
|
|
||||||
if ((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET)
|
|
||||||
{
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
return HAL_ERROR;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
/**
|
|
||||||
* @brief This function handles EXTI interrupt request.
|
|
||||||
* @param GPIO_Pin Specifies the pins connected to the EXTI line.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
|
|
||||||
{
|
|
||||||
/* EXTI line interrupt detected */
|
|
||||||
if (__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET)
|
|
||||||
{
|
|
||||||
__HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin);
|
|
||||||
HAL_GPIO_EXTI_Callback(GPIO_Pin);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief EXTI line detection callbacks.
|
|
||||||
* @param GPIO_Pin Specifies the pins connected to the EXTI line.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
|
|
||||||
{
|
|
||||||
/* Prevent unused argument(s) compilation warning */
|
|
||||||
UNUSED(GPIO_Pin);
|
|
||||||
|
|
||||||
/* NOTE: This function Should not be modified, when the callback is needed,
|
|
||||||
the HAL_GPIO_EXTI_Callback could be implemented in the user file
|
|
||||||
*/
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
|
|
||||||
File diff suppressed because it is too large
Load Diff
@ -1,337 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_i2c_ex.c
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief I2C Extended HAL module driver.
|
|
||||||
* This file provides firmware functions to manage the following
|
|
||||||
* functionalities of I2C Extended peripheral:
|
|
||||||
* + Extended features functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
==============================================================================
|
|
||||||
##### I2C peripheral Extended features #####
|
|
||||||
==============================================================================
|
|
||||||
|
|
||||||
[..] Comparing to other previous devices, the I2C interface for STM32L0xx
|
|
||||||
devices contains the following additional features
|
|
||||||
|
|
||||||
(+) Possibility to disable or enable Analog Noise Filter
|
|
||||||
(+) Use of a configured Digital Noise Filter
|
|
||||||
(+) Disable or enable wakeup from Stop mode(s)
|
|
||||||
(+) Disable or enable Fast Mode Plus
|
|
||||||
|
|
||||||
##### How to use this driver #####
|
|
||||||
==============================================================================
|
|
||||||
[..] This driver provides functions to configure Noise Filter and Wake Up Feature
|
|
||||||
(#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter()
|
|
||||||
(#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter()
|
|
||||||
(#) Configure the enable or disable of I2C Wake Up Mode using the functions :
|
|
||||||
(++) HAL_I2CEx_EnableWakeUp()
|
|
||||||
(++) HAL_I2CEx_DisableWakeUp()
|
|
||||||
(#) Configure the enable or disable of fast mode plus driving capability using the functions :
|
|
||||||
(++) HAL_I2CEx_EnableFastModePlus()
|
|
||||||
(++) HAL_I2CEx_DisableFastModePlus()
|
|
||||||
@endverbatim
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup I2CEx I2CEx
|
|
||||||
* @brief I2C Extended HAL module driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef HAL_I2C_MODULE_ENABLED
|
|
||||||
|
|
||||||
/* Private typedef -----------------------------------------------------------*/
|
|
||||||
/* Private define ------------------------------------------------------------*/
|
|
||||||
/* Private macro -------------------------------------------------------------*/
|
|
||||||
/* Private variables ---------------------------------------------------------*/
|
|
||||||
/* Private function prototypes -----------------------------------------------*/
|
|
||||||
/* Private functions ---------------------------------------------------------*/
|
|
||||||
|
|
||||||
/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions
|
|
||||||
* @brief Extended features functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
===============================================================================
|
|
||||||
##### Extended features functions #####
|
|
||||||
===============================================================================
|
|
||||||
[..] This section provides functions allowing to:
|
|
||||||
(+) Configure Noise Filters
|
|
||||||
(+) Configure Wake Up Feature
|
|
||||||
(+) Configure Fast Mode Plus
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Configure I2C Analog noise filter.
|
|
||||||
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
||||||
* the configuration information for the specified I2Cx peripheral.
|
|
||||||
* @param AnalogFilter New state of the Analog filter.
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
|
|
||||||
{
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
|
|
||||||
assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
|
|
||||||
|
|
||||||
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
||||||
{
|
|
||||||
/* Process Locked */
|
|
||||||
__HAL_LOCK(hi2c);
|
|
||||||
|
|
||||||
hi2c->State = HAL_I2C_STATE_BUSY;
|
|
||||||
|
|
||||||
/* Disable the selected I2C peripheral */
|
|
||||||
__HAL_I2C_DISABLE(hi2c);
|
|
||||||
|
|
||||||
/* Reset I2Cx ANOFF bit */
|
|
||||||
hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF);
|
|
||||||
|
|
||||||
/* Set analog filter bit*/
|
|
||||||
hi2c->Instance->CR1 |= AnalogFilter;
|
|
||||||
|
|
||||||
__HAL_I2C_ENABLE(hi2c);
|
|
||||||
|
|
||||||
hi2c->State = HAL_I2C_STATE_READY;
|
|
||||||
|
|
||||||
/* Process Unlocked */
|
|
||||||
__HAL_UNLOCK(hi2c);
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
return HAL_BUSY;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Configure I2C Digital noise filter.
|
|
||||||
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
||||||
* the configuration information for the specified I2Cx peripheral.
|
|
||||||
* @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F.
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)
|
|
||||||
{
|
|
||||||
uint32_t tmpreg;
|
|
||||||
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
|
|
||||||
assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
|
|
||||||
|
|
||||||
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
||||||
{
|
|
||||||
/* Process Locked */
|
|
||||||
__HAL_LOCK(hi2c);
|
|
||||||
|
|
||||||
hi2c->State = HAL_I2C_STATE_BUSY;
|
|
||||||
|
|
||||||
/* Disable the selected I2C peripheral */
|
|
||||||
__HAL_I2C_DISABLE(hi2c);
|
|
||||||
|
|
||||||
/* Get the old register value */
|
|
||||||
tmpreg = hi2c->Instance->CR1;
|
|
||||||
|
|
||||||
/* Reset I2Cx DNF bits [11:8] */
|
|
||||||
tmpreg &= ~(I2C_CR1_DNF);
|
|
||||||
|
|
||||||
/* Set I2Cx DNF coefficient */
|
|
||||||
tmpreg |= DigitalFilter << 8U;
|
|
||||||
|
|
||||||
/* Store the new register value */
|
|
||||||
hi2c->Instance->CR1 = tmpreg;
|
|
||||||
|
|
||||||
__HAL_I2C_ENABLE(hi2c);
|
|
||||||
|
|
||||||
hi2c->State = HAL_I2C_STATE_READY;
|
|
||||||
|
|
||||||
/* Process Unlocked */
|
|
||||||
__HAL_UNLOCK(hi2c);
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
return HAL_BUSY;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enable I2C wakeup from Stop mode(s).
|
|
||||||
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
||||||
* the configuration information for the specified I2Cx peripheral.
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c)
|
|
||||||
{
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance));
|
|
||||||
|
|
||||||
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
||||||
{
|
|
||||||
/* Process Locked */
|
|
||||||
__HAL_LOCK(hi2c);
|
|
||||||
|
|
||||||
hi2c->State = HAL_I2C_STATE_BUSY;
|
|
||||||
|
|
||||||
/* Disable the selected I2C peripheral */
|
|
||||||
__HAL_I2C_DISABLE(hi2c);
|
|
||||||
|
|
||||||
/* Enable wakeup from stop mode */
|
|
||||||
hi2c->Instance->CR1 |= I2C_CR1_WUPEN;
|
|
||||||
|
|
||||||
__HAL_I2C_ENABLE(hi2c);
|
|
||||||
|
|
||||||
hi2c->State = HAL_I2C_STATE_READY;
|
|
||||||
|
|
||||||
/* Process Unlocked */
|
|
||||||
__HAL_UNLOCK(hi2c);
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
return HAL_BUSY;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disable I2C wakeup from Stop mode(s).
|
|
||||||
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
||||||
* the configuration information for the specified I2Cx peripheral.
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c)
|
|
||||||
{
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance));
|
|
||||||
|
|
||||||
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
||||||
{
|
|
||||||
/* Process Locked */
|
|
||||||
__HAL_LOCK(hi2c);
|
|
||||||
|
|
||||||
hi2c->State = HAL_I2C_STATE_BUSY;
|
|
||||||
|
|
||||||
/* Disable the selected I2C peripheral */
|
|
||||||
__HAL_I2C_DISABLE(hi2c);
|
|
||||||
|
|
||||||
/* Enable wakeup from stop mode */
|
|
||||||
hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN);
|
|
||||||
|
|
||||||
__HAL_I2C_ENABLE(hi2c);
|
|
||||||
|
|
||||||
hi2c->State = HAL_I2C_STATE_READY;
|
|
||||||
|
|
||||||
/* Process Unlocked */
|
|
||||||
__HAL_UNLOCK(hi2c);
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
return HAL_BUSY;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
#if (defined(SYSCFG_CFGR2_I2C_PB6_FMP) || defined(SYSCFG_CFGR2_I2C_PB7_FMP)) || (defined(SYSCFG_CFGR2_I2C_PB8_FMP) || defined(SYSCFG_CFGR2_I2C_PB9_FMP)) || (defined(SYSCFG_CFGR2_I2C1_FMP)) || defined(SYSCFG_CFGR2_I2C2_FMP) || defined(SYSCFG_CFGR2_I2C3_FMP)
|
|
||||||
/**
|
|
||||||
* @brief Enable the I2C fast mode plus driving capability.
|
|
||||||
* @param ConfigFastModePlus Selects the pin.
|
|
||||||
* This parameter can be one of the @ref I2CEx_FastModePlus values
|
|
||||||
* @note For I2C1, fast mode plus driving capability can be enabled on all selected
|
|
||||||
* I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
|
|
||||||
* on each one of the following pins PB6, PB7, PB8 and PB9.
|
|
||||||
* @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
|
|
||||||
* can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
|
|
||||||
* @note For all I2C2 pins fast mode plus driving capability can be enabled
|
|
||||||
* only by using I2C_FASTMODEPLUS_I2C2 parameter.
|
|
||||||
* @note For all I2C3 pins fast mode plus driving capability can be enabled
|
|
||||||
* only by using I2C_FASTMODEPLUS_I2C3 parameter.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus)
|
|
||||||
{
|
|
||||||
/* Check the parameter */
|
|
||||||
assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
|
|
||||||
|
|
||||||
/* Enable SYSCFG clock */
|
|
||||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
|
||||||
|
|
||||||
/* Enable fast mode plus driving capability for selected pin */
|
|
||||||
SET_BIT(SYSCFG->CFGR2, (uint32_t)ConfigFastModePlus);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disable the I2C fast mode plus driving capability.
|
|
||||||
* @param ConfigFastModePlus Selects the pin.
|
|
||||||
* This parameter can be one of the @ref I2CEx_FastModePlus values
|
|
||||||
* @note For I2C1, fast mode plus driving capability can be disabled on all selected
|
|
||||||
* I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
|
|
||||||
* on each one of the following pins PB6, PB7, PB8 and PB9.
|
|
||||||
* @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
|
|
||||||
* can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
|
|
||||||
* @note For all I2C2 pins fast mode plus driving capability can be disabled
|
|
||||||
* only by using I2C_FASTMODEPLUS_I2C2 parameter.
|
|
||||||
* @note For all I2C3 pins fast mode plus driving capability can be disabled
|
|
||||||
* only by using I2C_FASTMODEPLUS_I2C3 parameter.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus)
|
|
||||||
{
|
|
||||||
/* Check the parameter */
|
|
||||||
assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
|
|
||||||
|
|
||||||
/* Enable SYSCFG clock */
|
|
||||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
|
||||||
|
|
||||||
/* Disable fast mode plus driving capability for selected pin */
|
|
||||||
CLEAR_BIT(SYSCFG->CFGR2, (uint32_t)ConfigFastModePlus);
|
|
||||||
}
|
|
||||||
|
|
||||||
#endif
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
@ -1,733 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_pwr.c
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief PWR HAL module driver.
|
|
||||||
*
|
|
||||||
* This file provides firmware functions to manage the following
|
|
||||||
* functionalities of the Power Controller (PWR) peripheral:
|
|
||||||
* + Initialization/de-initialization functions
|
|
||||||
* + Peripheral Control functions
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright(c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal.h"
|
|
||||||
|
|
||||||
#ifdef HAL_PWR_MODULE_ENABLED
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup PWR
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup PWR_Private
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#if defined(PWR_PVD_SUPPORT)
|
|
||||||
/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define PVD_MODE_IT (0x00010000U)
|
|
||||||
#define PVD_MODE_EVT (0x00020000U)
|
|
||||||
#define PVD_RISING_EDGE (0x00000001U)
|
|
||||||
#define PVD_FALLING_EDGE (0x00000002U)
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
/** @addtogroup PWR_Exported_Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup PWR_Exported_Functions_Group1
|
|
||||||
* @brief Initialization and de-initialization functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
===============================================================================
|
|
||||||
##### Initialization and de-initialization functions #####
|
|
||||||
===============================================================================
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Deinitializes the HAL PWR peripheral registers to their default reset values.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWR_DeInit(void)
|
|
||||||
{
|
|
||||||
__HAL_RCC_PWR_FORCE_RESET();
|
|
||||||
__HAL_RCC_PWR_RELEASE_RESET();
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup PWR_Exported_Functions_Group2
|
|
||||||
* @brief Low Power modes configuration functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
|
|
||||||
===============================================================================
|
|
||||||
##### Peripheral Control functions #####
|
|
||||||
===============================================================================
|
|
||||||
|
|
||||||
*** Backup domain ***
|
|
||||||
=========================
|
|
||||||
[..]
|
|
||||||
After reset, the backup domain (RTC registers, RTC backup data
|
|
||||||
registers) is protected against possible unwanted
|
|
||||||
write accesses.
|
|
||||||
To enable access to the RTC Domain and RTC registers, proceed as follows:
|
|
||||||
(+) Enable the Power Controller (PWR) APB1 interface clock using the
|
|
||||||
__HAL_RCC_PWR_CLK_ENABLE() macro.
|
|
||||||
(+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
|
|
||||||
|
|
||||||
*** PVD configuration ***
|
|
||||||
=========================
|
|
||||||
[..]
|
|
||||||
(+) The PVD is used to monitor the VDD power supply by comparing it to a
|
|
||||||
threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
|
|
||||||
(+) The PVD can use an external input analog voltage (PVD_IN) which is compared
|
|
||||||
internally to VREFINT. The PVD_IN (PB7) has to be configured in Analog mode
|
|
||||||
when PWR_PVDLevel_7 is selected (PLS[2:0] = 111).
|
|
||||||
|
|
||||||
(+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
|
|
||||||
than the PVD threshold. This event is internally connected to the EXTI
|
|
||||||
line16 and can generate an interrupt if enabled. This is done through
|
|
||||||
__HAL_PWR_PVD_EXTI_ENABLE_IT() macro.
|
|
||||||
(+) The PVD is stopped in Standby mode.
|
|
||||||
(+) The PVD feature is not supported on L0 Value line.
|
|
||||||
|
|
||||||
*** WakeUp pin configuration ***
|
|
||||||
================================
|
|
||||||
[..]
|
|
||||||
(+) WakeUp pin is used to wake up the system from Standby mode. This pin is
|
|
||||||
forced in input pull-down configuration and is active on rising edges.
|
|
||||||
(+) There are two WakeUp pins:
|
|
||||||
WakeUp Pin 1 on PA.00.
|
|
||||||
WakeUp Pin 2 on PC.13.
|
|
||||||
WakeUp Pin 3 on PE.06 .
|
|
||||||
|
|
||||||
|
|
||||||
[..]
|
|
||||||
*** Main and Backup Regulators configuration ***
|
|
||||||
================================================
|
|
||||||
|
|
||||||
(+) The main internal regulator can be configured to have a tradeoff between
|
|
||||||
performance and power consumption when the device does not operate at
|
|
||||||
the maximum frequency. This is done through __HAL_PWR_VOLTAGESCALING_CONFIG()
|
|
||||||
macro which configures the two VOS bits in PWR_CR register:
|
|
||||||
(++) PWR_REGULATOR_VOLTAGE_SCALE1 (VOS bits = 01), the regulator voltage output Scale 1 mode selected and
|
|
||||||
the System frequency can go up to 32 MHz.
|
|
||||||
(++) PWR_REGULATOR_VOLTAGE_SCALE2 (VOS bits = 10), the regulator voltage output Scale 2 mode selected and
|
|
||||||
the System frequency can go up to 16 MHz.
|
|
||||||
(++) PWR_REGULATOR_VOLTAGE_SCALE3 (VOS bits = 11), the regulator voltage output Scale 3 mode selected and
|
|
||||||
the System frequency can go up to 4.2 MHz.
|
|
||||||
|
|
||||||
Refer to the datasheets for more details.
|
|
||||||
|
|
||||||
*** Low Power modes configuration ***
|
|
||||||
=====================================
|
|
||||||
[..]
|
|
||||||
The device features 5 low-power modes:
|
|
||||||
(+) Low power run mode: regulator in low power mode, limited clock frequency,
|
|
||||||
limited number of peripherals running.
|
|
||||||
(+) Sleep mode: Cortex-M0+ core stopped, peripherals kept running.
|
|
||||||
(+) Low power sleep mode: Cortex-M0+ core stopped, limited clock frequency,
|
|
||||||
limited number of peripherals running, regulator in low power mode.
|
|
||||||
(+) Stop mode: All clocks are stopped, regulator running, regulator in low power mode.
|
|
||||||
(+) Standby mode: VCORE domain powered off
|
|
||||||
|
|
||||||
*** Low power run mode ***
|
|
||||||
=========================
|
|
||||||
[..]
|
|
||||||
To further reduce the consumption when the system is in Run mode, the regulator can be
|
|
||||||
configured in low power mode. In this mode, the system frequency should not exceed
|
|
||||||
MSI frequency range1.
|
|
||||||
In Low power run mode, all I/O pins keep the same state as in Run mode.
|
|
||||||
|
|
||||||
(+) Entry:
|
|
||||||
(++) VCORE in range2
|
|
||||||
(++) Decrease the system frequency not to exceed the frequency of MSI frequency range1.
|
|
||||||
(++) The regulator is forced in low power mode using the HAL_PWREx_EnableLowPowerRunMode()
|
|
||||||
function.
|
|
||||||
(+) Exit:
|
|
||||||
(++) The regulator is forced in Main regulator mode using the HAL_PWREx_DisableLowPowerRunMode()
|
|
||||||
function.
|
|
||||||
(++) Increase the system frequency if needed.
|
|
||||||
|
|
||||||
*** Sleep mode ***
|
|
||||||
==================
|
|
||||||
[..]
|
|
||||||
(+) Entry:
|
|
||||||
The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFx)
|
|
||||||
functions with
|
|
||||||
(++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
|
|
||||||
(++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
|
|
||||||
|
|
||||||
(+) Exit:
|
|
||||||
(++) Any peripheral interrupt acknowledged by the nested vectored interrupt
|
|
||||||
controller (NVIC) can wake up the device from Sleep mode. If the WFE instruction was used to enter sleep mode,
|
|
||||||
the MCU exits Sleep mode as soon as an event occurs.
|
|
||||||
|
|
||||||
*** Low power sleep mode ***
|
|
||||||
============================
|
|
||||||
[..]
|
|
||||||
(+) Entry:
|
|
||||||
The Low power sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_LOWPOWERREGULATOR_ON, PWR_SLEEPENTRY_WFx)
|
|
||||||
functions with
|
|
||||||
(++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
|
|
||||||
(++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
|
|
||||||
(+) The Flash memory can be switched off by using the control bits (SLEEP_PD in the FLASH_ACR register.
|
|
||||||
This reduces power consumption but increases the wake-up time.
|
|
||||||
|
|
||||||
(+) Exit:
|
|
||||||
(++) If the WFI instruction was used to enter Low power sleep mode, any peripheral interrupt
|
|
||||||
acknowledged by the nested vectored interrupt controller (NVIC) can wake up the device
|
|
||||||
from Low power sleep mode. If the WFE instruction was used to enter Low power sleep mode,
|
|
||||||
the MCU exits Sleep mode as soon as an event occurs.
|
|
||||||
|
|
||||||
*** Stop mode ***
|
|
||||||
=================
|
|
||||||
[..]
|
|
||||||
The Stop mode is based on the Cortex-M0+ deepsleep mode combined with peripheral
|
|
||||||
clock gating. The voltage regulator can be configured either in normal or low-power mode.
|
|
||||||
In Stop mode, all clocks in the VCORE domain are stopped, the PLL, the MSI, the HSI and
|
|
||||||
the HSE RC oscillators are disabled. Internal SRAM and register contents are preserved.
|
|
||||||
To get the lowest consumption in Stop mode, the internal Flash memory also enters low
|
|
||||||
power mode. When the Flash memory is in power-down mode, an additional startup delay is
|
|
||||||
incurred when waking up from Stop mode.
|
|
||||||
To minimize the consumption In Stop mode, VREFINT, the BOR, PVD, and temperature
|
|
||||||
sensor can be switched off before entering Stop mode. They can be switched on again by
|
|
||||||
software after exiting Stop mode using the ULP bit in the PWR_CR register.
|
|
||||||
In Stop mode, all I/O pins keep the same state as in Run mode.
|
|
||||||
|
|
||||||
(+) Entry:
|
|
||||||
The Stop mode is entered using the HAL_PWR_EnterSTOPMode
|
|
||||||
function with:
|
|
||||||
(++) Main regulator ON.
|
|
||||||
(++) Low Power regulator ON.
|
|
||||||
(++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
|
|
||||||
(++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
|
|
||||||
(+) Exit:
|
|
||||||
(++) By issuing an interrupt or a wakeup event, the MSI or HSI16 RC
|
|
||||||
oscillator is selected as system clock depending the bit STOPWUCK in the RCC_CFGR
|
|
||||||
register
|
|
||||||
|
|
||||||
*** Standby mode ***
|
|
||||||
====================
|
|
||||||
[..]
|
|
||||||
The Standby mode allows to achieve the lowest power consumption. It is based on the
|
|
||||||
Cortex-M0+ deepsleep mode, with the voltage regulator disabled. The VCORE domain is
|
|
||||||
consequently powered off. The PLL, the MSI, the HSI oscillator and the HSE oscillator are
|
|
||||||
also switched off. SRAM and register contents are lost except for the RTC registers, RTC
|
|
||||||
backup registers and Standby circuitry.
|
|
||||||
|
|
||||||
To minimize the consumption In Standby mode, VREFINT, the BOR, PVD, and temperature
|
|
||||||
sensor can be switched off before entering the Standby mode. They can be switched
|
|
||||||
on again by software after exiting the Standby mode.
|
|
||||||
function.
|
|
||||||
|
|
||||||
(+) Entry:
|
|
||||||
(++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function.
|
|
||||||
(+) Exit:
|
|
||||||
(++) WKUP pin rising edge, RTC alarm (Alarm A and Alarm B), RTC wakeup,
|
|
||||||
tamper event, time-stamp event, external reset in NRST pin, IWDG reset.
|
|
||||||
|
|
||||||
*** Auto-wakeup (AWU) from low-power mode ***
|
|
||||||
=============================================
|
|
||||||
[..]
|
|
||||||
The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC
|
|
||||||
Wakeup event, a tamper event, a time-stamp event, or a comparator event,
|
|
||||||
without depending on an external interrupt (Auto-wakeup mode).
|
|
||||||
|
|
||||||
(+) RTC auto-wakeup (AWU) from the Stop mode
|
|
||||||
(++) To wake up from the Stop mode with an RTC alarm event, it is necessary to:
|
|
||||||
(+++) Configure the EXTI Line 17 to be sensitive to rising edges (Interrupt
|
|
||||||
or Event modes) using the EXTI_Init() function.
|
|
||||||
(+++) Enable the RTC Alarm Interrupt using the RTC_ITConfig() function
|
|
||||||
(+++) Configure the RTC to generate the RTC alarm using the RTC_SetAlarm()
|
|
||||||
and RTC_AlarmCmd() functions.
|
|
||||||
(++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it
|
|
||||||
is necessary to:
|
|
||||||
(+++) Configure the EXTI Line 19 to be sensitive to rising edges (Interrupt
|
|
||||||
or Event modes) using the EXTI_Init() function.
|
|
||||||
(+++) Enable the RTC Tamper or time stamp Interrupt using the RTC_ITConfig()
|
|
||||||
function.
|
|
||||||
(+++) Configure the RTC to detect the tamper or time stamp event using the
|
|
||||||
RTC_TimeStampConfig(), RTC_TamperTriggerConfig() and RTC_TamperCmd()
|
|
||||||
functions.
|
|
||||||
(++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to:
|
|
||||||
(+++) Configure the EXTI Line 20 to be sensitive to rising edges (Interrupt
|
|
||||||
or Event modes) using the EXTI_Init() function.
|
|
||||||
(+++) Enable the RTC WakeUp Interrupt using the RTC_ITConfig() function.
|
|
||||||
(+++) Configure the RTC to generate the RTC WakeUp event using the RTC_WakeUpClockConfig(),
|
|
||||||
RTC_SetWakeUpCounter() and RTC_WakeUpCmd() functions.
|
|
||||||
|
|
||||||
(+) RTC auto-wakeup (AWU) from the Standby mode
|
|
||||||
(++) To wake up from the Standby mode with an RTC alarm event, it is necessary to:
|
|
||||||
(+++) Enable the RTC Alarm Interrupt using the RTC_ITConfig() function.
|
|
||||||
(+++) Configure the RTC to generate the RTC alarm using the RTC_SetAlarm()
|
|
||||||
and RTC_AlarmCmd() functions.
|
|
||||||
(++) To wake up from the Standby mode with an RTC Tamper or time stamp event, it
|
|
||||||
is necessary to:
|
|
||||||
(+++) Enable the RTC Tamper or time stamp Interrupt using the RTC_ITConfig()
|
|
||||||
function.
|
|
||||||
(+++) Configure the RTC to detect the tamper or time stamp event using the
|
|
||||||
RTC_TimeStampConfig(), RTC_TamperTriggerConfig() and RTC_TamperCmd()
|
|
||||||
functions.
|
|
||||||
(++) To wake up from the Standby mode with an RTC WakeUp event, it is necessary to:
|
|
||||||
(+++) Enable the RTC WakeUp Interrupt using the RTC_ITConfig() function
|
|
||||||
(+++) Configure the RTC to generate the RTC WakeUp event using the RTC_WakeUpClockConfig(),
|
|
||||||
RTC_SetWakeUpCounter() and RTC_WakeUpCmd() functions.
|
|
||||||
|
|
||||||
(+) Comparator auto-wakeup (AWU) from the Stop mode
|
|
||||||
(++) To wake up from the Stop mode with an comparator 1 or comparator 2 wakeup
|
|
||||||
event, it is necessary to:
|
|
||||||
(+++) Configure the EXTI Line 21 for comparator 1 or EXTI Line 22 for comparator 2
|
|
||||||
to be sensitive to to the selected edges (falling, rising or falling
|
|
||||||
and rising) (Interrupt or Event modes) using the EXTI_Init() function.
|
|
||||||
(+++) Configure the comparator to generate the event.
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enables access to the backup domain (RTC registers, RTC
|
|
||||||
* backup data registers ).
|
|
||||||
* @note If the HSE divided by 2, 4, 8 or 16 is used as the RTC clock, the
|
|
||||||
* Backup Domain Access should be kept enabled.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWR_EnableBkUpAccess(void)
|
|
||||||
{
|
|
||||||
/* Enable access to RTC and backup registers */
|
|
||||||
SET_BIT(PWR->CR, PWR_CR_DBP);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disables access to the backup domain
|
|
||||||
* @note Applies to RTC registers, RTC backup data registers.
|
|
||||||
* @note If the HSE divided by 2, 4, 8 or 16 is used as the RTC clock, the
|
|
||||||
* Backup Domain Access should be kept enabled.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWR_DisableBkUpAccess(void)
|
|
||||||
{
|
|
||||||
/* Disable access to RTC and backup registers */
|
|
||||||
CLEAR_BIT(PWR->CR, PWR_CR_DBP);
|
|
||||||
}
|
|
||||||
|
|
||||||
#if defined(PWR_PVD_SUPPORT)
|
|
||||||
/**
|
|
||||||
* @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
|
|
||||||
* @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration
|
|
||||||
* information for the PVD.
|
|
||||||
* @note Refer to the electrical characteristics of your device datasheet for
|
|
||||||
* more details about the voltage threshold corresponding to each
|
|
||||||
* detection level.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
|
|
||||||
{
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
|
|
||||||
assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
|
|
||||||
|
|
||||||
/* Set PLS[7:5] bits according to PVDLevel value */
|
|
||||||
MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel);
|
|
||||||
|
|
||||||
/* Clear any previous config. Keep it clear if no event or IT mode is selected */
|
|
||||||
__HAL_PWR_PVD_EXTI_DISABLE_EVENT();
|
|
||||||
__HAL_PWR_PVD_EXTI_DISABLE_IT();
|
|
||||||
__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
|
|
||||||
__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();
|
|
||||||
|
|
||||||
/* Configure interrupt mode */
|
|
||||||
if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
|
|
||||||
{
|
|
||||||
__HAL_PWR_PVD_EXTI_ENABLE_IT();
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Configure event mode */
|
|
||||||
if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
|
|
||||||
{
|
|
||||||
__HAL_PWR_PVD_EXTI_ENABLE_EVENT();
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Configure the edge */
|
|
||||||
if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
|
|
||||||
{
|
|
||||||
__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
|
|
||||||
}
|
|
||||||
|
|
||||||
if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
|
|
||||||
{
|
|
||||||
__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enables the Power Voltage Detector(PVD).
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWR_EnablePVD(void)
|
|
||||||
{
|
|
||||||
/* Enable the power voltage detector */
|
|
||||||
SET_BIT(PWR->CR, PWR_CR_PVDE);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disables the Power Voltage Detector(PVD).
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWR_DisablePVD(void)
|
|
||||||
{
|
|
||||||
/* Disable the power voltage detector */
|
|
||||||
CLEAR_BIT(PWR->CR, PWR_CR_PVDE);
|
|
||||||
}
|
|
||||||
#endif /* PWR_PVD_SUPPORT */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enables the WakeUp PINx functionality.
|
|
||||||
* @param WakeUpPinx: Specifies the Power Wake-Up pin to enable.
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg PWR_WAKEUP_PIN1
|
|
||||||
* @arg PWR_WAKEUP_PIN2
|
|
||||||
* @arg PWR_WAKEUP_PIN3 for stm32l07xxx and stm32l08xxx devices only.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx)
|
|
||||||
{
|
|
||||||
/* Check the parameter */
|
|
||||||
assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
|
|
||||||
/* Enable the EWUPx pin */
|
|
||||||
SET_BIT(PWR->CSR, WakeUpPinx);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disables the WakeUp PINx functionality.
|
|
||||||
* @param WakeUpPinx: Specifies the Power Wake-Up pin to disable.
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg PWR_WAKEUP_PIN1
|
|
||||||
* @arg PWR_WAKEUP_PIN2
|
|
||||||
* @arg PWR_WAKEUP_PIN3 for stm32l07xxx and stm32l08xxx devices only.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
|
|
||||||
{
|
|
||||||
/* Check the parameter */
|
|
||||||
assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
|
|
||||||
/* Disable the EWUPx pin */
|
|
||||||
CLEAR_BIT(PWR->CSR, WakeUpPinx);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enters Sleep mode.
|
|
||||||
* @note In Sleep mode, all I/O pins keep the same state as in Run mode.
|
|
||||||
* @param Regulator: Specifies the regulator state in SLEEP mode.
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON
|
|
||||||
* @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON
|
|
||||||
* @param SLEEPEntry: Specifies if SLEEP mode is entered with WFI or WFE instruction.
|
|
||||||
* When WFI entry is used, tick interrupt have to be disabled if not desired as
|
|
||||||
* the interrupt wake up source.
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
|
|
||||||
* @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
|
|
||||||
{
|
|
||||||
uint32_t tmpreg = 0U;
|
|
||||||
uint32_t ulpbit, vrefinbit;
|
|
||||||
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_PWR_REGULATOR(Regulator));
|
|
||||||
assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
|
|
||||||
|
|
||||||
/* It is forbidden to configure both EN_VREFINT=1 and ULP=1 if the device is
|
|
||||||
in Stop mode or in Sleep/Low-power sleep mode */
|
|
||||||
ulpbit = READ_BIT(PWR->CR, PWR_CR_ULP);
|
|
||||||
vrefinbit = READ_BIT(SYSCFG->CFGR3, SYSCFG_CFGR3_EN_VREFINT);
|
|
||||||
if((ulpbit != 0) && (vrefinbit != 0))
|
|
||||||
{
|
|
||||||
CLEAR_BIT(PWR->CR, PWR_CR_ULP);
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Select the regulator state in Sleep mode ---------------------------------*/
|
|
||||||
tmpreg = PWR->CR;
|
|
||||||
|
|
||||||
/* Clear PDDS and LPDS bits */
|
|
||||||
CLEAR_BIT(tmpreg, (PWR_CR_PDDS | PWR_CR_LPSDSR));
|
|
||||||
|
|
||||||
/* Set LPSDSR bit according to PWR_Regulator value */
|
|
||||||
SET_BIT(tmpreg, Regulator);
|
|
||||||
|
|
||||||
/* Store the new value */
|
|
||||||
PWR->CR = tmpreg;
|
|
||||||
|
|
||||||
/* Clear SLEEPDEEP bit of Cortex System Control Register */
|
|
||||||
CLEAR_BIT(SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
|
|
||||||
|
|
||||||
/* Select SLEEP mode entry -------------------------------------------------*/
|
|
||||||
if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
|
|
||||||
{
|
|
||||||
/* Request Wait For Interrupt */
|
|
||||||
__WFI();
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
/* Request Wait For Event */
|
|
||||||
__SEV();
|
|
||||||
__WFE();
|
|
||||||
__WFE();
|
|
||||||
}
|
|
||||||
|
|
||||||
if((ulpbit != 0) && (vrefinbit != 0))
|
|
||||||
{
|
|
||||||
SET_BIT(PWR->CR, PWR_CR_ULP);
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Additional NOP to ensure all pending instructions are flushed before entering low power mode */
|
|
||||||
__NOP();
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enters Stop mode.
|
|
||||||
* @note In Stop mode, all I/O pins keep the same state as in Run mode.
|
|
||||||
* @note When exiting Stop mode by issuing an interrupt or a wakeup event,
|
|
||||||
* MSI or HSI16 RCoscillator is selected as system clock depending
|
|
||||||
* the bit STOPWUCK in the RCC_CFGR register.
|
|
||||||
* @note When the voltage regulator operates in low power mode, an additional
|
|
||||||
* startup delay is incurred when waking up from Stop mode.
|
|
||||||
* By keeping the internal regulator ON during Stop mode, the consumption
|
|
||||||
* is higher although the startup time is reduced.
|
|
||||||
* @note Before entering in this function, it is important to ensure that the WUF
|
|
||||||
* wakeup flag is cleared. To perform this action, it is possible to call the
|
|
||||||
* following macro : __HAL_PWR_CLEAR_FLAG(PWR_FLAG_WU)
|
|
||||||
*
|
|
||||||
* @param Regulator: Specifies the regulator state in Stop mode.
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON
|
|
||||||
* @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON
|
|
||||||
* @param STOPEntry: Specifies if Stop mode in entered with WFI or WFE instruction.
|
|
||||||
* This parameter can be one of the following values:
|
|
||||||
* @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction
|
|
||||||
* @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
|
|
||||||
{
|
|
||||||
uint32_t tmpreg = 0U;
|
|
||||||
uint32_t ulpbit, vrefinbit;
|
|
||||||
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_PWR_REGULATOR(Regulator));
|
|
||||||
assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
|
|
||||||
|
|
||||||
/* It is forbidden to configure both EN_VREFINT=1 and ULP=1 if the device is
|
|
||||||
in Stop mode or in Sleep/Low-power sleep mode */
|
|
||||||
ulpbit = READ_BIT(PWR->CR, PWR_CR_ULP);
|
|
||||||
vrefinbit = READ_BIT(SYSCFG->CFGR3, SYSCFG_CFGR3_EN_VREFINT);
|
|
||||||
if((ulpbit != 0) && (vrefinbit != 0))
|
|
||||||
{
|
|
||||||
CLEAR_BIT(PWR->CR, PWR_CR_ULP);
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Select the regulator state in Stop mode ---------------------------------*/
|
|
||||||
tmpreg = PWR->CR;
|
|
||||||
|
|
||||||
/* Clear PDDS and LPDS bits */
|
|
||||||
CLEAR_BIT(tmpreg, (PWR_CR_PDDS | PWR_CR_LPSDSR));
|
|
||||||
|
|
||||||
/* Set LPSDSR bit according to PWR_Regulator value */
|
|
||||||
SET_BIT(tmpreg, Regulator);
|
|
||||||
|
|
||||||
/* Store the new value */
|
|
||||||
PWR->CR = tmpreg;
|
|
||||||
|
|
||||||
/* Set SLEEPDEEP bit of Cortex System Control Register */
|
|
||||||
SET_BIT(SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
|
|
||||||
|
|
||||||
/* Select Stop mode entry --------------------------------------------------*/
|
|
||||||
if(STOPEntry == PWR_STOPENTRY_WFI)
|
|
||||||
{
|
|
||||||
/* Request Wait For Interrupt */
|
|
||||||
__WFI();
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
/* Request Wait For Event */
|
|
||||||
__SEV();
|
|
||||||
__WFE();
|
|
||||||
__WFE();
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Reset SLEEPDEEP bit of Cortex System Control Register */
|
|
||||||
CLEAR_BIT(SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
|
|
||||||
|
|
||||||
if((ulpbit != 0) && (vrefinbit != 0))
|
|
||||||
{
|
|
||||||
SET_BIT(PWR->CR, PWR_CR_ULP);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enters Standby mode.
|
|
||||||
* @note In Standby mode, all I/O pins are high impedance except for:
|
|
||||||
* - Reset pad (still available)
|
|
||||||
* - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC
|
|
||||||
* Alarm out, or RTC clock calibration out.
|
|
||||||
* - RTC_AF2 pin (PC13) if configured for tamper.
|
|
||||||
* - WKUP pin 1 (PA00) if enabled.
|
|
||||||
* - WKUP pin 2 (PC13) if enabled.
|
|
||||||
* - WKUP pin 3 (PE06) if enabled, for stm32l07xxx and stm32l08xxx devices only.
|
|
||||||
* - WKUP pin 3 (PA02) if enabled, for stm32l031xx devices only.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWR_EnterSTANDBYMode(void)
|
|
||||||
{
|
|
||||||
/* Select Standby mode */
|
|
||||||
SET_BIT(PWR->CR, PWR_CR_PDDS);
|
|
||||||
|
|
||||||
/* Set SLEEPDEEP bit of Cortex System Control Register */
|
|
||||||
SET_BIT(SCB->SCR, SCB_SCR_SLEEPDEEP_Msk);
|
|
||||||
|
|
||||||
/* This option is used to ensure that store operations are completed */
|
|
||||||
#if defined ( __CC_ARM)
|
|
||||||
__force_stores();
|
|
||||||
#endif
|
|
||||||
/* Request Wait For Interrupt */
|
|
||||||
__WFI();
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode.
|
|
||||||
* @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor
|
|
||||||
* re-enters SLEEP mode when an interruption handling is over.
|
|
||||||
* Setting this bit is useful when the processor is expected to run only on
|
|
||||||
* interruptions handling.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWR_EnableSleepOnExit(void)
|
|
||||||
{
|
|
||||||
/* Set SLEEPONEXIT bit of Cortex System Control Register */
|
|
||||||
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode.
|
|
||||||
* @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor
|
|
||||||
* re-enters SLEEP mode when an interruption handling is over.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWR_DisableSleepOnExit(void)
|
|
||||||
{
|
|
||||||
/* Clear SLEEPONEXIT bit of Cortex System Control Register */
|
|
||||||
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enables CORTEX M0+ SEVONPEND bit.
|
|
||||||
* @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes
|
|
||||||
* WFE to wake up when an interrupt moves from inactive to pended.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWR_EnableSEVOnPend(void)
|
|
||||||
{
|
|
||||||
/* Set SEVONPEND bit of Cortex System Control Register */
|
|
||||||
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disables CORTEX M0+ SEVONPEND bit.
|
|
||||||
* @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes
|
|
||||||
* WFE to wake up when an interrupt moves from inactive to pended.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWR_DisableSEVOnPend(void)
|
|
||||||
{
|
|
||||||
/* Clear SEVONPEND bit of Cortex System Control Register */
|
|
||||||
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
|
|
||||||
}
|
|
||||||
|
|
||||||
#if defined(PWR_PVD_SUPPORT)
|
|
||||||
/**
|
|
||||||
* @brief This function handles the PWR PVD interrupt request.
|
|
||||||
* @note This API should be called under the PVD_IRQHandler().
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWR_PVD_IRQHandler(void)
|
|
||||||
{
|
|
||||||
/* Check PWR exti flag */
|
|
||||||
if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
|
|
||||||
{
|
|
||||||
/* PWR PVD interrupt user callback */
|
|
||||||
HAL_PWR_PVDCallback();
|
|
||||||
|
|
||||||
/* Clear PWR Exti pending bit */
|
|
||||||
__HAL_PWR_PVD_EXTI_CLEAR_FLAG();
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief PWR PVD interrupt callback
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
__weak void HAL_PWR_PVDCallback(void)
|
|
||||||
{
|
|
||||||
/* NOTE : This function Should not be modified, when the callback is needed,
|
|
||||||
the HAL_PWR_PVDCallback could be implemented in the user file
|
|
||||||
*/
|
|
||||||
}
|
|
||||||
#endif /* PWR_PVD_SUPPORT */
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
|
|
||||||
@ -1,184 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_pwr_ex.c
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief Extended PWR HAL module driver.
|
|
||||||
* This file provides firmware functions to manage the following
|
|
||||||
* functionalities of the Power Controller (PWR) peripheral:
|
|
||||||
* + Extended Initialization and de-initialization functions
|
|
||||||
* + Extended Peripheral Control functions
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright(c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal.h"
|
|
||||||
|
|
||||||
#ifdef HAL_PWR_MODULE_ENABLED
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup PWREx
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @addtogroup PWREx_Private
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup PWR_Extended_TimeOut_Value PWREx Flag Setting Time Out Value
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
#define PWR_FLAG_SETTING_DELAY_US 50U
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
/** @addtogroup PWREx_Exported_Functions
|
|
||||||
* @brief Low Power modes configuration functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
|
|
||||||
===============================================================================
|
|
||||||
##### Peripheral extended features functions #####
|
|
||||||
===============================================================================
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Return Voltage Scaling Range.
|
|
||||||
* @retval VOS bit field (PWR_REGULATOR_VOLTAGE_SCALE1, PWR_REGULATOR_VOLTAGE_SCALE2 or PWR_REGULATOR_VOLTAGE_SCALE3)
|
|
||||||
*/
|
|
||||||
uint32_t HAL_PWREx_GetVoltageRange(void)
|
|
||||||
{
|
|
||||||
return (PWR->CR & PWR_CR_VOS);
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enables the Fast WakeUp from Ultra Low Power mode.
|
|
||||||
* @note This bit works in conjunction with ULP bit.
|
|
||||||
* Means, when ULP = 1 and FWU = 1 :VREFINT startup time is ignored when
|
|
||||||
* exiting from low power mode.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWREx_EnableFastWakeUp(void)
|
|
||||||
{
|
|
||||||
/* Enable the fast wake up */
|
|
||||||
SET_BIT(PWR->CR, PWR_CR_FWU);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disables the Fast WakeUp from Ultra Low Power mode.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWREx_DisableFastWakeUp(void)
|
|
||||||
{
|
|
||||||
/* Disable the fast wake up */
|
|
||||||
CLEAR_BIT(PWR->CR, PWR_CR_FWU);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enables the Ultra Low Power mode
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWREx_EnableUltraLowPower(void)
|
|
||||||
{
|
|
||||||
/* Enable the Ultra Low Power mode */
|
|
||||||
SET_BIT(PWR->CR, PWR_CR_ULP);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disables the Ultra Low Power mode
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWREx_DisableUltraLowPower(void)
|
|
||||||
{
|
|
||||||
/* Disable the Ultra Low Power mode */
|
|
||||||
CLEAR_BIT(PWR->CR, PWR_CR_ULP);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Enable the Low Power Run mode.
|
|
||||||
* @note Low power run mode can only be entered when VCORE is in range 2.
|
|
||||||
* In addition, the dynamic voltage scaling must not be used when Low
|
|
||||||
* power run mode is selected. Only Stop and Sleep modes with regulator
|
|
||||||
* configured in Low power mode is allowed when Low power run mode is
|
|
||||||
* selected.
|
|
||||||
* @note The frequency of the system clock must be decreased to not exceed the
|
|
||||||
* frequency of RCC_MSIRANGE_1.
|
|
||||||
* @note In Low power run mode, all I/O pins keep the same state as in Run mode.
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_PWREx_EnableLowPowerRunMode(void)
|
|
||||||
{
|
|
||||||
/* Enters the Low Power Run mode */
|
|
||||||
SET_BIT(PWR->CR, PWR_CR_LPSDSR);
|
|
||||||
SET_BIT(PWR->CR, PWR_CR_LPRUN);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Disable the Low Power Run mode.
|
|
||||||
* @note Before HAL_PWREx_DisableLowPowerRunMode() completion, the function checks that
|
|
||||||
* REGLPF has been properly reset (otherwise, HAL_PWREx_DisableLowPowerRunMode
|
|
||||||
* returns HAL_TIMEOUT status). The system clock frequency can then be
|
|
||||||
* increased above 2 MHz.
|
|
||||||
* @retval HAL_StatusTypeDef
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void)
|
|
||||||
{
|
|
||||||
uint32_t wait_loop_index = 0U;
|
|
||||||
|
|
||||||
/* Exit the Low Power Run mode */
|
|
||||||
CLEAR_BIT(PWR->CR, PWR_CR_LPRUN);
|
|
||||||
CLEAR_BIT(PWR->CR, PWR_CR_LPSDSR);
|
|
||||||
|
|
||||||
/* Wait until REGLPF is reset */
|
|
||||||
wait_loop_index = (PWR_FLAG_SETTING_DELAY_US * (SystemCoreClock / 1000000U));
|
|
||||||
|
|
||||||
while ((wait_loop_index != 0U) && (HAL_IS_BIT_SET(PWR->CSR, PWR_CSR_REGLPF)))
|
|
||||||
{
|
|
||||||
wait_loop_index--;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (HAL_IS_BIT_SET(PWR->CSR, PWR_CSR_REGLPF))
|
|
||||||
{
|
|
||||||
return HAL_TIMEOUT;
|
|
||||||
}
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
|
|
||||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@ -1,427 +0,0 @@
|
|||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* @file stm32l0xx_hal_tim_ex.c
|
|
||||||
* @author MCD Application Team
|
|
||||||
* @brief TIM HAL module driver.
|
|
||||||
* This file provides firmware functions to manage the following
|
|
||||||
* functionalities of the Timer Extended peripheral:
|
|
||||||
* + Time Master and Slave synchronization configuration
|
|
||||||
* + Timer remapping capabilities configuration
|
|
||||||
@verbatim
|
|
||||||
==============================================================================
|
|
||||||
##### TIMER Extended features #####
|
|
||||||
==============================================================================
|
|
||||||
[..]
|
|
||||||
The Timer Extended features include:
|
|
||||||
(#) Synchronization circuit to control the timer with external signals and to
|
|
||||||
interconnect several timers together.
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under BSD 3-Clause license,
|
|
||||||
* the "License"; You may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at:
|
|
||||||
* opensource.org/licenses/BSD-3-Clause
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32l0xx_hal.h"
|
|
||||||
|
|
||||||
/** @addtogroup STM32L0xx_HAL_Driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/** @defgroup TIMEx TIMEx
|
|
||||||
* @brief TIM Extended HAL module driver
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifdef HAL_TIM_MODULE_ENABLED
|
|
||||||
|
|
||||||
/* Private typedef -----------------------------------------------------------*/
|
|
||||||
/* Private define ------------------------------------------------------------*/
|
|
||||||
/* Private macros ------------------------------------------------------------*/
|
|
||||||
/* Private variables ---------------------------------------------------------*/
|
|
||||||
/* Private function prototypes -----------------------------------------------*/
|
|
||||||
|
|
||||||
/* Exported functions --------------------------------------------------------*/
|
|
||||||
/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
|
|
||||||
* @brief Peripheral Control functions
|
|
||||||
*
|
|
||||||
@verbatim
|
|
||||||
==============================================================================
|
|
||||||
##### Peripheral Control functions #####
|
|
||||||
==============================================================================
|
|
||||||
[..]
|
|
||||||
This section provides functions allowing to:
|
|
||||||
(+) Configure Master synchronization.
|
|
||||||
(+) Configure timer remapping capabilities.
|
|
||||||
|
|
||||||
@endverbatim
|
|
||||||
* @{
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Configures the TIM in master mode.
|
|
||||||
* @param htim TIM handle.
|
|
||||||
* @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that
|
|
||||||
* contains the selected trigger output (TRGO) and the Master/Slave
|
|
||||||
* mode.
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
|
|
||||||
TIM_MasterConfigTypeDef *sMasterConfig)
|
|
||||||
{
|
|
||||||
uint32_t tmpcr2;
|
|
||||||
uint32_t tmpsmcr;
|
|
||||||
|
|
||||||
/* Check the parameters */
|
|
||||||
assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance));
|
|
||||||
assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger));
|
|
||||||
assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode));
|
|
||||||
|
|
||||||
/* Check input state */
|
|
||||||
__HAL_LOCK(htim);
|
|
||||||
|
|
||||||
/* Change the handler state */
|
|
||||||
htim->State = HAL_TIM_STATE_BUSY;
|
|
||||||
|
|
||||||
/* Get the TIMx CR2 register value */
|
|
||||||
tmpcr2 = htim->Instance->CR2;
|
|
||||||
|
|
||||||
/* Get the TIMx SMCR register value */
|
|
||||||
tmpsmcr = htim->Instance->SMCR;
|
|
||||||
|
|
||||||
/* Reset the MMS Bits */
|
|
||||||
tmpcr2 &= ~TIM_CR2_MMS;
|
|
||||||
/* Select the TRGO source */
|
|
||||||
tmpcr2 |= sMasterConfig->MasterOutputTrigger;
|
|
||||||
|
|
||||||
/* Update TIMx CR2 */
|
|
||||||
htim->Instance->CR2 = tmpcr2;
|
|
||||||
|
|
||||||
if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
|
|
||||||
{
|
|
||||||
/* Reset the MSM Bit */
|
|
||||||
tmpsmcr &= ~TIM_SMCR_MSM;
|
|
||||||
/* Set master mode */
|
|
||||||
tmpsmcr |= sMasterConfig->MasterSlaveMode;
|
|
||||||
|
|
||||||
/* Update TIMx SMCR */
|
|
||||||
htim->Instance->SMCR = tmpsmcr;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Change the htim state */
|
|
||||||
htim->State = HAL_TIM_STATE_READY;
|
|
||||||
|
|
||||||
__HAL_UNLOCK(htim);
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief Configures the TIMx Remapping input capabilities.
|
|
||||||
@if STM32L073xx
|
|
||||||
* @note It is not possible to connect TIM2 and TIM21 on PB5(AF4) at the same time.
|
|
||||||
* When selecting TIM3_TI2_GPIOB5_AF4, Channel2 of TIM3 will be
|
|
||||||
* connected to PB5(AF4) and Channel2 of TIM21 will be connected to
|
|
||||||
* some other GPIOs. (refer to alternate functions for more details)
|
|
||||||
* When selecting TIM3_TI2_GPIO_DEF, Channel2 of Timer 3 will be
|
|
||||||
* connected an GPIO (other than PB5(AF4)) and Channel2 of TIM21
|
|
||||||
* will be connected to PB5(AF4).
|
|
||||||
* @note When TIM2 ETR is fed with HSI48, this ETR must be prescaled internally
|
|
||||||
* to the TIMER2 because the maximum system frequency is 32 MHz
|
|
||||||
@endif
|
|
||||||
* @param htim TIM handle.
|
|
||||||
* @param Remap specifies the TIM remapping source.
|
|
||||||
@if STM32L073xx
|
|
||||||
* For TIM2, the parameter is a combination of 2 fields (field1 | field2):
|
|
||||||
*
|
|
||||||
* field1 can have the following values:
|
|
||||||
* @arg TIM2_ETR_GPIO: TIM2 ETR connected to GPIO (default):
|
|
||||||
* PA0(AF5) or PA5(AF2) or PA15(AF2) or PE9(AF2)
|
|
||||||
* @arg TIM2_ETR_HSI48: TIM2 ETR connected to HSI48
|
|
||||||
* @arg TIM2_ETR_HSI16: TIM2 ETR connected to HSI16
|
|
||||||
* @arg TIM2_ETR_LSE: TIM2 ETR connected to LSE
|
|
||||||
* @arg TIM2_ETR_COMP2_OUT: TIM2 ETR connected to COMP2 output
|
|
||||||
* @arg TIM2_ETR_COMP1_OUT: TIM2 ETR connected to COMP1 output
|
|
||||||
*
|
|
||||||
* field2 can have the following values:
|
|
||||||
* @arg TIM2_TI4_GPIO : TIM2 TI4 connected to GPIO1(default):
|
|
||||||
* PA3(AF2) or PB11(AF2) or PE12(AF0)
|
|
||||||
* @arg TIM2_TI4_COMP1: TIM2 TI4 connected to COMP1
|
|
||||||
* @arg TIM2_TI4_COMP2: TIM2 TI4 connected to COMP2
|
|
||||||
@endif
|
|
||||||
@if STM32L031xx
|
|
||||||
* For TIM2, the parameter is a combination of 2 fields (field1 | field2):
|
|
||||||
*
|
|
||||||
* field1 can have the following values:
|
|
||||||
* @arg TIM2_ETR_GPIO: TIM2 ETR connected to GPIO (default):
|
|
||||||
* PA0(AF5) or PA5(AF2) or PA15(AF2)
|
|
||||||
* @arg TIM2_ETR_HSI16: TIM2 ETR connected to HS16 (HSIOUT)
|
|
||||||
* @arg TIM2_ETR_LSE: TIM2 ETR connected to LSE
|
|
||||||
* @arg TIM2_ETR_COMP2_OUT: TIM2 ETR connected to COMP2 output
|
|
||||||
* @arg TIM2_ETR_COMP1_OUT: TIM2 ETR connected to COMP1 output
|
|
||||||
*
|
|
||||||
* field2 can have the following values:
|
|
||||||
* @arg TIM2_TI4_GPIO : TIM2 TI4 connected to GPIO (default):
|
|
||||||
* PA3(AF2) or PB11(AF2) or PB1(AF5)
|
|
||||||
* @arg TIM2_TI4_COMP1_OUT: TIM2 TI4 connected to COMP1 output
|
|
||||||
* @arg TIM2_TI4_COMP2_OUT: TIM2 TI4 connected to COMP2 output
|
|
||||||
@endif
|
|
||||||
@if STM32L011xx
|
|
||||||
* For TIM2, the parameter is a combination of 2 fields (field1 | field2):
|
|
||||||
*
|
|
||||||
* field1 can have the following values:
|
|
||||||
* @arg TIM2_ETR_GPIO: TIM2 ETR connected to GPIO (default):
|
|
||||||
* PA0(AF5) or PA5(AF2) or PA15(AF2)
|
|
||||||
* @arg TIM2_ETR_HSI16: TIM2 ETR connected to HS16 (HSIOUT)
|
|
||||||
* @arg TIM2_ETR_LSE: TIM2 ETR connected to LSE
|
|
||||||
* @arg TIM2_ETR_COMP2_OUT: TIM2 ETR connected to COMP2 output
|
|
||||||
* @arg TIM2_ETR_COMP1_OUT: TIM2 ETR connected to COMP1 output
|
|
||||||
*
|
|
||||||
* field2 can have the following values:
|
|
||||||
* @arg TIM2_TI4_GPIO : TIM2 TI4 connected to GPIO (default):
|
|
||||||
* PA3(AF2) or PB11(AF2) or PB1(AF5)
|
|
||||||
* @arg TIM2_TI4_COMP1_OUT: TIM2 TI4 connected to COMP1 output
|
|
||||||
* @arg TIM2_TI4_COMP2_OUT: TIM2 TI4 connected to COMP2 output
|
|
||||||
@endif
|
|
||||||
@if STM32L051xx
|
|
||||||
* For TIM2, the parameter is a combination of 2 fields (field1 | field2):
|
|
||||||
*
|
|
||||||
* field1 can have the following values:
|
|
||||||
* @arg TIM2_ETR_GPIO: TIM2 ETR connected to GPIO (default):
|
|
||||||
* PA0(AF5) or PA5(AF2) or PA15(AF2) or PE9(AF2)
|
|
||||||
* @arg TIM2_ETR_HSI48: TIM2 ETR connected to HSI48
|
|
||||||
* @arg TIM2_ETR_LSE: TIM2 ETR connected to LSE
|
|
||||||
* @arg TIM2_ETR_COMP2_OUT: TIM2 ETR connected to COMP2 output
|
|
||||||
* @arg TIM2_ETR_COMP1_OUT: TIM2 ETR connected to COMP1 output
|
|
||||||
*
|
|
||||||
* field2 can have the following values:
|
|
||||||
* @arg TIM2_TI4_GPIO: TIM2 TI4 connected to GPIO1(default):
|
|
||||||
* PA3(AF2) or PB11(AF2) or PE12(AF0)
|
|
||||||
* @arg TIM2_TI4_COMP1: TIM2 TI4 connected to COMP1
|
|
||||||
* @arg TIM2_TI4_COMP2: TIM2 TI4 connected to COMP2
|
|
||||||
* @arg TIM2_TI4_GPIO2: TIM2 TI4 connected to GPIO2 :
|
|
||||||
* PA3(AF2) or PB11(AF2) or PE12(AF0)
|
|
||||||
@endif
|
|
||||||
@if STM32L073xx
|
|
||||||
*
|
|
||||||
* For TIM3, the parameter is a combination of 4 fields (field1 | field2 | field3 | field4):
|
|
||||||
*
|
|
||||||
* field1 can have the following values:
|
|
||||||
* @arg TIM3_ETR_GPIO: TIM3 ETR connected to GPIO (default):
|
|
||||||
* PE2(AF2) or PD2(AF2) or PE2(AF2)
|
|
||||||
* @arg TIM3_ETR_HSI: TIM3 ETR connected to HSI
|
|
||||||
*
|
|
||||||
* field2 can have the following values:
|
|
||||||
* @arg TIM3_TI1_USB_SOF: TIM3 TI1 connected to USB_SOF (default)
|
|
||||||
* @arg TIM3_TI1_GPIO: TIM3 TI1 connected to GPIO :
|
|
||||||
* PE3(AF2) or PA6(AF2) or PC6(AF2) or PB4(AF2)
|
|
||||||
*
|
|
||||||
* field3 can have the following values:
|
|
||||||
* @arg TIM3_TI2_GPIOB5_AF4:TIM3 TI3 connected to P5(AF4)
|
|
||||||
* (refer to note)
|
|
||||||
* @arg TIM3_TI2_GPIO_DEF: TIM3 TI3 connected to GPIO (default):
|
|
||||||
* PA7(AF2) or PB5(AF4) or PC7(AF2) or PE7(AF2)
|
|
||||||
*
|
|
||||||
* field4 can have the following values:
|
|
||||||
* @arg TIM3_TI4_GPIO_DEF: TIM3 TI4 connected to GPIO:
|
|
||||||
* PB1(AF2) or PE6(AF2)
|
|
||||||
* @arg TIM3_TI4_GPIOC9_AF2:TIM3 TI4 connected to PC9(AF)2
|
|
||||||
@endif
|
|
||||||
@if STM32L073xx
|
|
||||||
* For TIM21, the parameter is a combination of 3 fields (field1 | field2 | field3):
|
|
||||||
*
|
|
||||||
* field1 can have the following values:
|
|
||||||
* @arg TIM21_ETR_GPIO: TIM21 ETR connected to GPIO(default) :
|
|
||||||
* PC9(AF0) or PA1(AF5)
|
|
||||||
* @arg TIM21_ETR_COMP2_OUT:TIM21 ETR connected to COMP2 output
|
|
||||||
* @arg TIM21_ETR_COMP1_OUT:TIM21 ETR connected to COMP1 output
|
|
||||||
* @arg TIM21_ETR_LSE: TIM21 ETR connected to LSE
|
|
||||||
*
|
|
||||||
* field2 can have the following values:
|
|
||||||
* @arg TIM21_TI1_MCO: TIM21 TI1 connected to MCO
|
|
||||||
* @arg TIM21_TI1_RTC_WKUT_IT: TIM21 TI1 connected to RTC WAKEUP interrupt
|
|
||||||
* @arg TIM21_TI1_HSE_RTC: TIM21 TI1 connected to HSE_RTC
|
|
||||||
* @arg TIM21_TI1_MSI: TIM21 TI1 connected to MSI clock
|
|
||||||
* @arg TIM21_TI1_LSE: TIM21 TI1 connected to LSE
|
|
||||||
* @arg TIM21_TI1_LSI: TIM21 TI1 connected to LSI
|
|
||||||
* @arg TIM21_TI1_COMP1_OUT:TIM21 TI1 connected to COMP1_OUT
|
|
||||||
* @arg TIM21_TI1_GPIO: TIM21 TI1 connected to GPIO(default):
|
|
||||||
* PA2(AF0) or PB13(AF6) or PE5(AF0) or PD0(AF0)
|
|
||||||
*
|
|
||||||
* field3 can have the following values:
|
|
||||||
* @arg TIM21_TI2_GPIO: TIM21 TI2 connected to GPIO(default):
|
|
||||||
* PA3(AF0) or PB14(AF6) or PE6(AF0) or PD7(AF1)
|
|
||||||
* @arg TIM21_TI2_COMP2_OUT:TIM21 TI2 connected to COMP2 output
|
|
||||||
@endif
|
|
||||||
@if STM32L031xx
|
|
||||||
* For TIM21, the parameter is a combination of 3 fields (field1 | field2 | field3):
|
|
||||||
*
|
|
||||||
* field1 can have the following values:
|
|
||||||
* @arg TIM21_ETR_GPIO: TIM21 ETR connected to GPIO(default) :
|
|
||||||
* PA1(AF5)
|
|
||||||
* @arg TIM21_ETR_COMP2_OUT:TIM21 ETR connected to COMP2 output
|
|
||||||
* @arg TIM21_ETR_COMP1_OUT:TIM21 ETR connected to COMP1 output
|
|
||||||
* @arg TIM21_ETR_LSE: TIM21 ETR connected to LSE
|
|
||||||
*
|
|
||||||
* field2 can have the following values:
|
|
||||||
* @arg TIM21_TI1_MCO: TIM21 TI1 connected to MCO
|
|
||||||
* @arg TIM21_TI1_RTC_WKUT_IT: TIM21 TI1 connected to RTC WAKEUP interrupt
|
|
||||||
* @arg TIM21_TI1_HSE_RTC: TIM21 TI1 connected to HSE_RTC
|
|
||||||
* @arg TIM21_TI1_MSI: TIM21 TI1 connected to MSI clock
|
|
||||||
* @arg TIM21_TI1_LSE: TIM21 TI1 connected to LSE
|
|
||||||
* @arg TIM21_TI1_LSI: TIM21 TI1 connected to LSI
|
|
||||||
* @arg TIM21_TI1_COMP1_OUT:TIM21 TI1 connected to COMP1_OUT
|
|
||||||
*
|
|
||||||
* field3 can have the following values:
|
|
||||||
* @arg TIM21_TI2_GPIO: TIM21 TI2 connected to GPIO(default):
|
|
||||||
* PA3(AF0) or PB14(AF6)
|
|
||||||
* @arg TIM21_TI2_COMP2_OUT:TIM21 TI2 connected to COMP2 output
|
|
||||||
@endif
|
|
||||||
@if STM32L011xx
|
|
||||||
* For TIM21, the parameter is a combination of 3 fields (field1 | field2 | field3):
|
|
||||||
*
|
|
||||||
* field1 can have the following values:
|
|
||||||
* @arg TIM21_ETR_GPIO: TIM21 ETR connected to GPIO(default) :
|
|
||||||
* PA1(AF5)
|
|
||||||
* @arg TIM21_ETR_COMP2_OUT:TIM21 ETR connected to COMP2 output
|
|
||||||
* @arg TIM21_ETR_COMP1_OUT:TIM21 ETR connected to COMP1 output
|
|
||||||
* @arg TIM21_ETR_LSE: TIM21 ETR connected to LSE
|
|
||||||
*
|
|
||||||
* field2 can have the following values:
|
|
||||||
* @arg TIM21_TI1_MCO: TIM21 TI1 connected to MCO
|
|
||||||
* @arg TIM21_TI1_RTC_WKUT_IT: TIM21 TI1 connected to RTC WAKEUP interrupt
|
|
||||||
* @arg TIM21_TI1_HSE_RTC: TIM21 TI1 connected to HSE_RTC
|
|
||||||
* @arg TIM21_TI1_MSI: TIM21 TI1 connected to MSI clock
|
|
||||||
* @arg TIM21_TI1_LSE: TIM21 TI1 connected to LSE
|
|
||||||
* @arg TIM21_TI1_LSI: TIM21 TI1 connected to LSI
|
|
||||||
* @arg TIM21_TI1_COMP1_OUT:TIM21 TI1 connected to COMP1_OUT
|
|
||||||
*
|
|
||||||
* field3 can have the following values:
|
|
||||||
* @arg TIM21_TI2_GPIO: TIM21 TI2 connected to GPIO(default):
|
|
||||||
* PA3(AF0) or PB14(AF6)
|
|
||||||
* @arg TIM21_TI2_COMP2_OUT:TIM21 TI2 connected to COMP2 output
|
|
||||||
@endif
|
|
||||||
@if STM32L051xx
|
|
||||||
* For TIM21, the parameter is a combination of 3 fields (field1 | field2 | field3):
|
|
||||||
*
|
|
||||||
* field1 can have the following values:
|
|
||||||
* @arg TIM21_ETR_GPIO: TIM21 ETR connected to GPIO(default) :
|
|
||||||
* PC9(AF0) or PA1(AF5)
|
|
||||||
* @arg TIM21_ETR_COMP2_OUT:TIM21 ETR connected to COMP2 output
|
|
||||||
* @arg TIM21_ETR_COMP1_OUT:TIM21 ETR connected to COMP1 output
|
|
||||||
* @arg TIM21_ETR_LSE: TIM21 ETR connected to LSE
|
|
||||||
*
|
|
||||||
* field2 can have the following values:
|
|
||||||
* @arg TIM21_TI1_MCO: TIM21 TI1 connected to MCO
|
|
||||||
* @arg TIM21_TI1_RTC_WKUT_IT: TIM21 TI1 connected to RTC WAKEUP interrupt
|
|
||||||
* @arg TIM21_TI1_HSE_RTC: TIM21 TI1 connected to HSE_RTC
|
|
||||||
* @arg TIM21_TI1_MSI: TIM21 TI1 connected to MSI clock
|
|
||||||
* @arg TIM21_TI1_LSE: TIM21 TI1 connected to LSE
|
|
||||||
* @arg TIM21_TI1_LSI: TIM21 TI1 connected to LSI
|
|
||||||
* @arg TIM21_TI1_COMP1_OUT:TIM21 TI1 connected to COMP1_OUT
|
|
||||||
* @arg TIM21_TI1_GPIO: TIM21 TI1 connected to GPIO(default):
|
|
||||||
* PA2(AF0) or PB13(AF6) or PE5(AF0) or PD0(AF0)
|
|
||||||
*
|
|
||||||
* field3 can have the following values:
|
|
||||||
* @arg TIM21_TI2_GPIO: TIM21 TI2 connected to GPIO(default):
|
|
||||||
* PA3(AF0) or PB14(AF6) or PE6(AF0) or PD7(AF1)
|
|
||||||
* @arg TIM21_TI2_COMP2_OUT:TIM21 TI2 connected to COMP2 output
|
|
||||||
@endif
|
|
||||||
@if STM32L073xx
|
|
||||||
*
|
|
||||||
* For TIM22, the parameter can have the following values:
|
|
||||||
* @arg TIM22_ETR_LSE: TIM22 ETR connected to LSE
|
|
||||||
* @arg TIM22_ETR_COMP2_OUT:TIM22 ETR connected to COMP2 output
|
|
||||||
* @arg TIM22_ETR_COMP1_OUT:TIM22 ETR connected to COMP1 output
|
|
||||||
* @arg TIM22_ETR_GPIO: TIM22 ETR connected to GPIO(default):
|
|
||||||
* PC8(AF0) or PA4(AF5)
|
|
||||||
* @arg TIM22_TI1_GPIO: TIM22 TI1 connected to GPIO(default):
|
|
||||||
* PC6(AF0) or PA6(AF5) or PB4(AF4) or PE0(AF3)
|
|
||||||
* @arg TIM22_TI1_COMP2_OUT:TIM22 TI1 connected to COMP2 output
|
|
||||||
* @arg TIM22_TI1_COMP1_OUT:TIM22 TI1 connected to COMP1 output
|
|
||||||
@endif
|
|
||||||
@if STM32L031xx
|
|
||||||
*
|
|
||||||
* For TIM22, the parameter is a combination of 2 fields (field1 | field2):
|
|
||||||
*
|
|
||||||
* field1 can have the following values:
|
|
||||||
* @arg TIM22_ETR_LSE: TIM22 ETR connected to LSE
|
|
||||||
* @arg TIM22_ETR_COMP2_OUT:TIM22 ETR connected to COMP2 output
|
|
||||||
* @arg TIM22_ETR_COMP1_OUT:TIM22 ETR connected to COMP1 output
|
|
||||||
* @arg TIM22_ETR_GPIO: TIM22 ETR connected to GPIO(default):
|
|
||||||
* PA4(AF5)
|
|
||||||
*
|
|
||||||
* field2 can have the following values:
|
|
||||||
* @arg TIM22_TI1_GPIO: TIM22 TI1 connected to GPIO(default):
|
|
||||||
* PC0(AF6) or PA5(AF6) or PB4(AF4)
|
|
||||||
* @arg TIM22_TI1_COMP2_OUT:TIM22 TI1 connected to COMP2 output
|
|
||||||
* @arg TIM22_TI1_COMP1_OUT:TIM22 TI1 connected to COMP1 output
|
|
||||||
*
|
|
||||||
@endif
|
|
||||||
@if STM32L051xx
|
|
||||||
*
|
|
||||||
* For TIM22, the parameter is a combination of 2 fields (field1 | field2):
|
|
||||||
*
|
|
||||||
* field1 can have the following values:
|
|
||||||
* @arg TIM22_ETR_LSE: TIM22 ETR connected to LSE
|
|
||||||
* @arg TIM22_ETR_COMP2_OUT:TIM22 ETR connected to COMP2 output
|
|
||||||
* @arg TIM22_ETR_COMP1_OUT:TIM22 ETR connected to COMP1 output
|
|
||||||
* @arg TIM22_ETR_GPIO: TIM22 ETR connected to GPIO(default):
|
|
||||||
* PC8(AF0) or PA4(AF5)
|
|
||||||
*
|
|
||||||
* field2 can have the following values:
|
|
||||||
* @arg TIM22_TI1_GPIO: TIM22 TI1 connected to GPIO(default):
|
|
||||||
* PC6(AF0) or PA6(AF5) or PB4(AF4) or PE0(AF3)
|
|
||||||
* @arg TIM22_TI1_COMP2_OUT:TIM22 TI1 connected to COMP2 output
|
|
||||||
* @arg TIM22_TI1_COMP1_OUT:TIM22 TI1 connected to COMP1 output
|
|
||||||
@endif
|
|
||||||
*
|
|
||||||
* @retval HAL status
|
|
||||||
*/
|
|
||||||
HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap)
|
|
||||||
{
|
|
||||||
__HAL_LOCK(htim);
|
|
||||||
|
|
||||||
/* Check parameters */
|
|
||||||
assert_param(IS_TIM_REMAP(htim->Instance, Remap));
|
|
||||||
|
|
||||||
/* Set the Timer remapping configuration */
|
|
||||||
WRITE_REG(htim->Instance->OR, Remap);
|
|
||||||
|
|
||||||
__HAL_UNLOCK(htim);
|
|
||||||
|
|
||||||
return HAL_OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @}
|
|
||||||
*/
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
85
fw/Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_pwr.c
Normal file
85
fw/Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_pwr.c
Normal file
@ -0,0 +1,85 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file stm32l0xx_ll_pwr.c
|
||||||
|
* @author MCD Application Team
|
||||||
|
* @brief PWR LL module driver.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright(c) 2016 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under BSD 3-Clause license,
|
||||||
|
* the "License"; You may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at:
|
||||||
|
* opensource.org/licenses/BSD-3-Clause
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
#if defined(USE_FULL_LL_DRIVER)
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "stm32l0xx_ll_pwr.h"
|
||||||
|
#include "stm32l0xx_ll_bus.h"
|
||||||
|
|
||||||
|
/** @addtogroup STM32L0xx_LL_Driver
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
#if defined(PWR)
|
||||||
|
|
||||||
|
/** @defgroup PWR_LL PWR
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Private types -------------------------------------------------------------*/
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
/* Private constants ---------------------------------------------------------*/
|
||||||
|
/* Private macros ------------------------------------------------------------*/
|
||||||
|
/* Private function prototypes -----------------------------------------------*/
|
||||||
|
|
||||||
|
/* Exported functions --------------------------------------------------------*/
|
||||||
|
/** @addtogroup PWR_LL_Exported_Functions
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup PWR_LL_EF_Init
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief De-initialize the PWR registers to their default reset values.
|
||||||
|
* @retval An ErrorStatus enumeration value:
|
||||||
|
* - SUCCESS: PWR registers are de-initialized
|
||||||
|
* - ERROR: not applicable
|
||||||
|
*/
|
||||||
|
ErrorStatus LL_PWR_DeInit(void)
|
||||||
|
{
|
||||||
|
/* Force reset of PWR clock */
|
||||||
|
LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_PWR);
|
||||||
|
|
||||||
|
/* Release reset of PWR clock */
|
||||||
|
LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_PWR);
|
||||||
|
|
||||||
|
return SUCCESS;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
#endif /* defined(PWR) */
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
#endif /* USE_FULL_LL_DRIVER */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||||
@ -12,7 +12,7 @@ ProjectManager.NoMain=false
|
|||||||
PA0-CK_IN.Mode=Asynchronous
|
PA0-CK_IN.Mode=Asynchronous
|
||||||
RCC.LPUARTFreq_Value=2097000
|
RCC.LPUARTFreq_Value=2097000
|
||||||
RCC.PLLCLKFreq_Value=24000000
|
RCC.PLLCLKFreq_Value=24000000
|
||||||
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-LL-true,2-MX_DMA_Init-DMA-false-LL-true,3-SystemClock_Config-RCC-false-HAL-false,4-MX_I2C1_Init-I2C1-false-LL-true,5-MX_LPUART1_UART_Init-LPUART1-false-LL-true
|
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-LL-true,2-MX_DMA_Init-DMA-false-LL-true,3-SystemClock_Config-RCC-false-LL-false,4-MX_I2C1_Init-I2C1-false-LL-true,5-MX_LPUART1_UART_Init-LPUART1-false-LL-true
|
||||||
Dma.LPUART1_RX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE
|
Dma.LPUART1_RX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE
|
||||||
RCC.RTCFreq_Value=37000
|
RCC.RTCFreq_Value=37000
|
||||||
LPUART1.WordLength=UART_WORDLENGTH_8B
|
LPUART1.WordLength=UART_WORDLENGTH_8B
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user